A range of cells contain characters that i want to replace with spaces. The problem is that the length of the string differs and also the characters differ.
For example, below a list of cell values:
GR
GRKR
GRKRKR
GRKRK1
GRON
GRONBL
As a result for the first value i want 2 spaces, for the second one 4 spaces etc.
Is it possible to do this with a formula? I don't want to use VBA for this if possible...
I recently became owner of a spreadsheet with some issues, and I am trying to make it useful. Each row has a URL of a blog post, and I want to extract the date from it (which is present in each URL) while getting rid of the rest of the URL. I was able to get rid of everything up to the year (which comes first), but then the URL continues, for example, 2013/05/16/the-rest-of-the-url/ and I would like to just have 2013/05/16 remain.
I am trying to use find and replace with the find box reading 2013/??/??/*/ and replacing it with 2013/??/?? which effectively erases everything else in the url, but leaves ?? instead of the numbers. Is there any way to have it so that it keeps whatever was in the original box?
I am trying to do a vlookup. I receive a report that gives the data as hyperlinks. I run a macro to remove the hyperlinks. I'm then left with a name that i want to match using a vlookup to get other data. The names are Chinese characters. I have tried using trim and clean function but its still leaving a space after the name. If i fo in manually and delete the space at the end the vlookup works fine. How to remove the spaces? i have about 5000 rows.
学员名字EliteNumber刘传佳=TRIM(A2)=VLOOKUP(B2,Sheet3!B:D,3,FALSE)刘传佳=VLOOKUP(D2,Sheet3!B1:D3550,3,FALSE)刘传佳 =TRIM(A3)刘传佳=VLOOKUP(D3,Sheet3!B2:D3551,3,FALSE)钟才富 =TRIM(A4)钟才富=VLOOKUP(D4,Sheet3!B3:D3552,3,FALSE)张杰 =TRIM(A5)张杰=VLOOKUP(D5,Sheet3!B4:D3553,3,FALSE)
刘传佳刘传佳刘传佳2001425刘传佳 刘传佳 刘传佳2001425钟才富 钟才富 钟才富800857张杰 张杰 张杰#N/A
I am trying to replace all spaces in a string with an underscore.
I'll be applying a loop to cycle through the whole column in that file. Should be pretty easy..
I need help looking at text in a cell that has [] around it such as [big red trucks] and copy that text to the end of the cell and replace the "space' between the words and add '+' signs so the result looks like [big red trucks] [big+red+trucks].
example:
This is what the cell looks like before
[big red trucks] cost 5000 in store
This is what the cell needs to look like after
[big red trucks] cost 5000 in store[big+reg+trucks]
there may be additional text after the ']', I need the phrase with the + signs copied to the end of the cell
i have data which has lots of these hyphen "-" how can i get rid of them,
for example -Eq Cash-
i need the result to be
Eq Cash
Also i have lots of front spaces in my data, how can i get rid of those? so for example
Test (there is 2 spaces before T)
I am trying to get excel to sum totals, but exclude answers that are outside
of a certain range. I can get it to do this by using =IF(Z8>0.5,Z8,0).
However, I need it to display absolutely nothing in the cells, rather than a
zero because it alters future calculations.
I have a worksheet that contains lots of value. I want to run quick calculation on it but for some reason counta function counts blank cells.
I checked and the cells with =len() and it returns a number > 1
What is the proper way to clean the whole worksheet with some copy paste value and get rid of invisible character like space or nonprintable ones to be sure to get the right number of cells with value?
Initially I'm simply copying a data table from a web page using "Ctrl + A" then "Ctrl + C", and then pasting the data straight onto a new worksheet so I can work with it. (After temporarily re-naming the old sheet)
But I keep finding what looks like double-spaces after some of the important text within the Range of cells I'm working with. I need to be able to select & conditional format the values of the text in some columns of the sheet, so need to loose these trailing spaces.
Unfortunately, it's not consistence as to how many spaces trail the text I need. Sometimes it's only one space, sometimes its two spaces ?
So far, I've had mixed success with a recorded "Replace" code but none of the other codes I have found on forum pages either don't work all or seem to give any consistent results. E;g; TRIM, CLEAN
I suspect my problem is, I do not know how to call the code properly, or trying to work with too large a range ?
The start of my code reads:
Code:
Sheets("Data").Select
Sheets("Data").Name = "Old Data"
Sheets.Add After:=Sheets(Sheets.Count)
Sheets(Sheets.Count).Select
ActiveSheet.Name = "Data"
[Code]...
' At the moment I'm using to select the pasted range I want to work on: Range(Range("C46"), Range("C46").SpecialCells(xlLastCell)).Select
This is where I need a code to work on the new Data sheet and remove all the trailing characters.
MsgBox "All data cleaned successfully !", vbInformation + vbOKOnly, "All Done"
I would like to sort words or data which has the First capital letter, words which has spaces and words which contains number... i have attached a sample file.
View 9 Replies View RelatedI've been using =TRIM for a while... but just tried FIND "space bar" REPLACE "nothing" and it works fine and takes about 1/10 the time.
View 6 Replies View RelatedExcel 2007.I have a list of postcodes (UK) which have different lengths of characters (including spaces) from 6-8, however our system seems to add additional spaces inbetween the postcode, so it could have upto 11/12 characters (inc spaces) Below is what could come out:
EH21 6PQ - 1 Space (8 Char)
EH12 9HG - 3 Spaces (10 Char)
E1 8DF - 3 Spaces (8 Char)
LL5 1GH - 2 Spaces (8 Char)
L5 1FG - 1 Space (6 Char)
What I need is a formula to ensure each postcode only has 8 characters by inserting spaces between if there's less than 8 char and trimming if there's more than 8 char
So from the above postcodes the desired results would be:
EH21 6PQ - 1 Space (8 Char) - This would be correct
EH12 9HG - 3 Spaces (10 Char) - Trim off 2 spaces from the middle
E1 8DF - 3 Spaces (8 Char) - This would be correct
LL5 1GH - 2 Spaces (8 Char) - This would be correct
L5 1FG - 1 Space (6 Char) - Insert 2 spaces in the middle
Replace characters in a string. I have this macro:
View 2 Replies View RelatedI have some records that include greek addresses. The greek alphabet contains letters that are common to the english one (A,B,E,Z,H,I,K,M,N,O,P,T,Y,X) and records with mixed characters will cause me problem. What can I do to find and replace any of those letters with the greek version of the letter.
example:
for a record:
T..5123 (this is the Greek abbreviation for P.O.BOX 5123)
I'm looking for a function to replace the first letter T (wether is Greek or English) with the Greek version of it
example 2:
KYMH 6 (kimis is the street, 6 the number)
I should replace English (first four ) letters with the Greek version...
example 3:
BAPITOY 14 (valaoritou is the street, 14 the number) ...........
I'm trying to do a quick find and replace across a range of cells to remove Chr(10) and Chr(13) characters. For some strange reason, some of the cells are being good and duly allow the removal of said characters and some are not - they stubbornly refuse to remove with no error message. The ones that are not allow removal if I copy the individual cell to a new sheet.
Sub removeCharNew()
'Dim x As Integer
Cells(1, 1).Select
Range(Selection, Selection.End(xlToRight)).Select
Range(Selection, Selection.End(xlDown)).Select
Cells.Replace Chr(10), ""
Cells.Replace Chr(13), ""
End Sub
Is it possible to display a dialog box or msgbox that doesnt have an OK button ?
i.e I want a message that comes up on the screen that says "Links Updating...Please Wait" which then automatically changes to "Links Sucessfully Updated" on completion...I dont want the macro to be interrupted by the msgbox/dialog...
I download several sets of data from an internet site. The only way I can do this is to copy and paste into Excel. The problem is, that all of the cells with numbers in them show up as text, and when I press F2, I find that there is a blank space at the end of each number.
Find and replace, searching for a blank space does not work - Excel "cannot find any data to replace". That function does work on cells in which I have created my own space at the end of a number, but not on these numbers. That leads me to believe that that "blank space" is actually some other invisible character that I need to be searching for. I've attached a bit of my data - maybe somebody else can identify my phantom character.
To get around this, I have been using the formula =(left(A1,len(A1)-1), and that works, it's just that it is a pain to create another table of 20-some columns with this formula, then copy those to values, then for each column convert text to columns to change the text to values, then search and replace for #value! where the original cells were blank.
I have a worksheet that I produced from optical character recognition, and there are a lot of funky characters that I need to get rid of. One is a line break or carraige return (I assume it's the same character that I could insert by entering ALT+ENTER). How do I search for this special character to replace it? How do I identify what that invisible character is?
View 2 Replies View RelatedI have very large text data which contains accented characters (E.g., "ÑÒÓÔÕÖÙÚÛÜÝàáâãäåçèéêëìíîïðñòóôõöùúûüýÿˆµ" etc.) within words.
Since I have several data sheets, some of which having 500000+ rows, Find and Replace and similar options are not viable.
I wish to replace each of these characters with regular English characters in all sheets. If that is difficult, these must at least be removed from the whole text. note that I need to preserve regular characters that are commonly used, particularly the hyphen (-) and underscore (_).
I am looking a macro which should perform below activities
I have a lists of suppliers which needs to cleansed....
1.replace all the special characters with a space
2.replace Corporation with Corp
Incorporation with Inc
Limited with Ltd
Limited partnership/ltd partnership with LP
Company with Co
ASSC/ASSOC with ASSOCIATION/ASSOCIATES (SEARCH SUPPLIER IN GOOGLE FOR THE CORRECT ONE)
MGNT with MANAGEMENT
SVCS with SERVICES
DEPT with DEPARTMENT
Unltd with UNLIMITED
Ctr with CENTER
UNIV with UNIVERSITY
3. Remove any text, Special characters and numbers after INC,CO, LTD, CORP,LLP, LLC
The macro should when I select any particular column... not restricted to column A
I have been trying to do the following but have not been successful. thanks in advance for helping!
- i have lots of text strings on one worksheet
- some text strings have <randomstring>, some even have multiple instances of <randomstring>, but others don't have a <randomstring> at all
- what i want is remove anything within "<" and ">", including the operators "<" and ">"
i have done this so far, with simple text functions, have each of the following lines in separate columns (text string column is "C"): .....
I need help with a formula (no VBA) that will find all the semi-colons ";" and pound signs "#" in a cell and replace them with this "<br> - ".
Example of Cell A1: ;#Red;#Green;#Blue;#
I started with this:
=REPLACE(MultChoice,SEARCH(";#",MultChoice),1,"<br> - ")
but it only replaces the first character.
I have a long list of items in one column, with parameters that are all split by an underscore.
However, in some instances, some of the text that is separated by an underscore needs to be joined together.
So for instance I'll have;
This_is_a_very_good_thing
This_is_a_perfect_thing
Where I want the result to be that "good_thing" becomes "good-thing" and "perfect_thing" becomes "perfect-thing".
How can I get this done with a Macro, instead of constantly doing a Vlookup to change this instances.
I basically want to find and replace certain characters in a formula, but the formula is quite intricate so I will give some background to the problem first:
I have a complex spread sheet which is used to check if a data array matches another data array (both data arrays are different sizes). One array has a set of parameters for a variable and the other array has the variables and the actual values for each variable. I have a section with the following formulas to check if the actual value (C121&D121) matches the parameters ($A$9:$A$108, $B$9:$B$108) & ($C$9:$C$108, $D$9:$D$108)
I have the following formula in cell AB121:
=(C121=INDEX($B$9:$B$108,ROW(101:101)-INT(ROW(100:100)/$D$1)*$D$1))
In cell AC121:
=(D121=INDEX($D$9:$D$108,ROW(101:101)-INT(ROW(100:100)/$D$1)*$D$1))
And have similar formulas from AD121 to AY121. I mention this to point out that excel regards this as an inconsistent formula, I haven't copied and pasted it over, I have had to re-enter it in each cell adjusting the parameter sections.
The problem I have is that currently this is set up to check through a data set and wrap around every 100 rows ('100' Entered in $D$1) but I want to adjust the formula when there is a different amount of rows to check. So basically the only way I can think to be able to do this is to have a formula or something in VBA (which I have very low level experience with) to be able to go into the formula and change certain characters within the formula. For example, if I wanted to check 95 rows instead of 100, it would need to have 95 in $D$1, which I enter in manually, but then how to go in and replace (101:101)-INT(ROW(100:100) with (96:96)-INT(ROW(95:95) in 2 sections in the 1 formula then do the same with the inconsistent formula from AC121:AY121?
I have about 40,000 lines in Column A that have text like so...
13HMPS32TRE600001OP000000601
13L9KUPSOTE600001OP000000601
I need a formula to change all TR and OT to characters QT. I did a find and replace but its changing other columns of text that I don't need changed.
I have a conversion issue. I have a sheet that is In Japanese (Shift-JIS) and some characters are replaced by boxes (squares), I have tried to record a macro to combat this, ie copy the symbols (squares) and replacing the squares with a corresponding letter. It works when I record the macro, but when I run the macro again it replaces everything with the letter I choose.
Sub replacing()
Columns("A:A").Select
Selection.Replace What:="??", Replacement:="RR", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
End Sub
It seems that the macro is not able to record the squares and replace them with R. see attached xlsheet.
Working on a macro to replace a list of about 20 specific "Special" Characters in excel, and have ran into 6 that will not work.. Following are the characters: ā, č, ć, ř, ş, ż
ActiveSheet.Select
Selection.Replace What:="", Replacement:="a", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
Selection.Replace What:="", Replacement:="a", LookAt:=xlPart, _
SearchOrder:=xlByRows, MatchCase:=False, SearchFormat:=False, _
ReplaceFormat:=False
QUESTION: How do I check to see if a cell contains either "" or "/" and if it does then replace it with "-"? THE REASON: I have a form which needs to be saved in a particular directory with the name "Form 1 - client name - matter name". To do this I have put =("G:UsersCComplianceFile OpeningForm 1 - "&B7&" - "&D42) in Cell A1 and then in VBA added the following macro to a button which saves the file
ThisFile = Range("A1").Value
ActiveWorkbook.SaveAs Filename:=ThisFile
This works ok BUT, if the user puts "/" or "" in either B7 or D42, it won't save and throws up an error because you can't use those signs when saving a file.
I have list of email ids and some of which contains accented characters.I need to replace these accented characters with regular character.
Example:
rian.pieda@intt.com.cn
ario.sancez@acca.com
i'm looking for macro for find and replace characters in a locked sheet, if a cell contains for example Monday (First day of week)
I want with a command or macro to change the (First day of week) in (Top of the Week) like this Monday (Top of the Week)