Resizing Picture Image To Fixed Height And Then Cropped Width
Jan 24, 2014
I'm trying to make this macro work to resize images for our fashion Look Book. In theory, it should work. But of course it does not Here is the code we are using:
Code:
Sub BIGcrop()
Selection.Height = 507.6
x = Selection.ShapeRange.Width
y = x / 2
Z = y - 144
[Code]....
I want all my pictures to have a height of 7.05 inches and a width of 4. The height comes out different everytime depending on the scaling of the template I'm using. I need it to adjust accordingly. I'm open to having the image move into merged cells, as long as it will first adjust the height and then crop the sides (so the orientation stays the same).
View 4 Replies
ADVERTISEMENT
Oct 28, 2008
I need to paste a picture from the Clipboard to my Worksheet. I select the origin and paste it with the macro.
I need to adjust that picture to fit in a defined space from left corner of Range($J$10) to the right corner of
Range($BJ$35)
Actually, i'm using this procedure
ActiveSheet.Unprotect
RANGE("graphique_PL").Select
ActiveSheet.Paste
Selection.ShapeRange.LockAspectRatio = msoFalse
Selection.ShapeRange.Height = 358.25
Selection.ShapeRange.Width = 725.
The problem with it is, the Height and Width is arbitrary to the size of the cells at the moment. I would like to had a procedure to calculate does value. They represent the distance between the defined cells location for the image. Actually, if cells width or height change, the picture is misplaced.
View 9 Replies
View Related
Nov 14, 2013
My code is:
Code:
Sub Insertwinds1()
ppath = "winds.webimage.url"
With ActiveSheet.pictures.insert(ppath)
.left = Range("A2").left
.top = Range("A2").top
.ShapeRange.PictureFormat.CropRight = 70
.ShapeRange.PictureFormat.Cropleft = 130
.ShapeRange.PictureFormat.CropTop = 300
.ShapeRange.PictureFormat.CropBottom = 90
End With
End Sub
This takes the image from the web (which is fairly large), moves it to Cell A2, and then Crops out the extra space I don't need showing. When this Macro is finished, due to the large Crop size, the image is in the center of the screen and nowwhere near the A2 cell. Is there a simple addition I can add to this code to move it back to a specific cell (a2) after it's been cropped? or move it via placement on the sheet (13, 13, 600, 600)? My old code I was using for this was:
Code:
Dim MYPICTURE As Shape
Set MYPICTURE = Activesheet.shapes.addshape(msoshaperectange, 13, 13, 600, 600)
MyPICTURE.fill.userpicture "winds.webimage.url"
End Sub
This one inserted the image, placed it in the specific spot... but I can't get that one to crop it, which is why I started over with teh first code.
View 5 Replies
View Related
Feb 13, 2014
Lets say i type for now...
A1 = USA
B1 = Philippines
and then later
A1 = dog
B1 = cat
Is there a way that the width would automatically adjust even as I change the values of the given cells; meaning, if a word is long, the width will automatically adjust "longer", if a word is short, then it will automatically adjust "shorter".
I know how the "AutoFit Column Width" works but I don't want to press that every time my values change (words becoming shorter or longer).
View 4 Replies
View Related
Aug 31, 2009
I am in desperate need of a macros that sets the heights and widths of columns and rows on a list of provided spreadsheets.
On each of these sheets:
MySheets = Array("FY09 Installation Support", "FY09 Install", "FY09 Purchase", _
"FY09 CF Discretionary Grants", "FY09 CF LOI", "FY08 Purchase", _
"FY08 Installation Support", "FY08 CF Discretionary Grants", _
"FY07 Sup Install Support", "FY07 CF Install Non-LOI", "FY07 Sup Purchase", _
"FY05 CF Carryover Install", "FY04 Recovery Funds", "FY05 Recovery Funds", _
"FY08 Safety Carryover", "FY09 Safety", "FY09 Transport Canada")
I need to set the height of all the rows to 18.00. I need to set the width of all of the columns to 12.00, except for columns A, C, and T, which need to be at a width of 28.00.
View 4 Replies
View Related
Oct 19, 2013
How do I get the actual worksheet height and width?
View 5 Replies
View Related
Jul 22, 2007
I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
Is there any way to lock the dimensions?
View 7 Replies
View Related
Jan 8, 2007
I'm using a UserForm.Label to display comments which are of variable length. At the bottom of the UserForm are two CommandButtons. I'd like the gap between the Label text and the CommandButtons to be small (and preferably constant); and the CommandButtons to be at the bottom of the UserForm. This means setting the CommandButton.Top and UserForm.Height as a function of the Label.Height. The crude way I have so far achieved is to use Len(Label.Caption) as the surrogate for Label.Height but it's not very satisfactory due to word-wrap and blank lines.
View 2 Replies
View Related
Jul 18, 2007
I need to freeze the column and row height and width for a specific area in spreadsheet, so that it shouldnt be altered in future from any one using this sheet.
View 3 Replies
View Related
Jul 22, 2009
I'm trying to create a vb to get all columns on my sheet to have a fixed width.
If I run my sub all columns go back to the set width. But I want the width to reset when the width is changed.
View 2 Replies
View Related
Nov 19, 2008
Excel 2007
I want to CONCATENATE 3 columns
column 1 will have names
Columns 2 and 3 will have numbers
All will be of different lengths
Is there any way to set a fixed width when I use the CONCATENATE funstion so everything looks more uniform (left justified)
View 7 Replies
View Related
Jan 9, 2007
I have a userform which has vertical and horizontal scroll bars. I want to set the scroll bar width and height properties to the correct value, regardless of the size of monitor screen used to look at the user form. I'm thought of using the code below in the initiliaze event for the user form:
Me.ScrollHeight = Me.Height
Me.ScrollWidth = Me.Width
However, this does not seem to work. I've tried adding 250 (Me.Height + 250)to each measurement, which works, but gives the user with the larger screen a very big scroll area. I wondered if there was a formula based on the application height, that would allow the scroll height to be perfect for the user form regardless of screen size?
Rico.
PS. I also use the following code to set the user form height on initialize. I don't know if that effects anything.
Me.Height = Application.Height
Me.Width = Application.Width
View 3 Replies
View Related
Dec 21, 2007
How do I write a short piece of code that defines the specific height and width that I want to assign to an existing chart. The code will be added to existing code that I have that formats the chart in other ways. This needs to be able to work with any active chart selected, not a specific named chart.
View 2 Replies
View Related
Apr 17, 2008
I have vba code to change column width and height into mm.
The code is taking alot of time to run and then hangs my excel session.
The code below calls two sub routines.
Sub Change()
Dim i As Long
With Application
.DisplayAlerts = False
. ScreenUpdating = False
End With
For i = 1 To 23
SetColumnWidthMM i, 3.5
Next i
End Sub...
View 3 Replies
View Related
Jan 23, 2009
I have a worksheet that I receive as an Excel File in this format:
Account # (10 digits), Blank, Amount (Various), Date, Number(6), Location(blank), Tran Code (2) and Description (5)
View 10 Replies
View Related
Apr 4, 2012
I have this data below in an excel worksheet. I'm using the ws.Cells(x,x).Value command to read values from the cells an print them out to a .prn fixed width file. However when it writes it to the .prn file my numeric fields don't have are not 0.00 but 0. And also the numeric fields are left justified I would like them right justified in the .prn file.
Excel Spreadsheet values
1.135.102/29/120.000.001.135.202/29/120.000.00
My output to .prn file looks like below:
1.135.1 02/29/12 0 0
1.135.1 02/29/12 0 0
I would like my output to .prn file to look like the following:
1.135.1 02/29/12 0.00 0.00
1.135.1 02/29/12 0.00 0.00
View 7 Replies
View Related
Oct 30, 2009
This used to (and on some machines still does) work very well, but all of the sudden on my work machine, it is incredably SLOW!! The whole program takes a list of tasks and dates, and creates a wall calendar from them. Then (the offending part, below in code) looks at each cell on the wall calendar and formats it by sizing the height of a merged cell so that the entire task is displayed, then goes on to put a square around it (works fine).
The formating of the cell height/width can take up to 11 SECONDS each cell. What is happening to do this? Again, it USED to, and on some machines still does, FLY through this process. But now it just crawls. Code below, with the 3 offending lines identified.
Private Sub Fit_Height(ByVal Target As Range)
Dim NewRwHt As Single
Dim cWdth As Single, MrgeWdth As Single
Dim c As Range, cc As Range
Dim ma As Range
Application. ScreenUpdating = False
With Target
If .MergeCells And .WrapText Then
Set c = Target.Cells(1, 1)
cWdth = c.ColumnWidth
Set ma = c.MergeArea
For Each cc In ma.Cells
MrgeWdth = MrgeWdth + cc.ColumnWidth
Next
An additional item (clue?) is that, after the macro is done running, it is still unbearably slow to do anything on-screen. Grabbing the column header and changing the column width takes 5 seconds or so before it snaps to the desired width and displays correctly. Closing Excel and reopening it takes care of that problem.
More advancement (as I wait). It seems to be the Application.PageSetup that kills it. As soon as I hit the first Application.PageSetup line, the app grinds to a halt, and almost every line after that that manipulates the screen format or the page format takes 5 or so seconds EACH to process. I put them all at the end, but that really doesn't solve the problem, nor explain it, nor give me a true solution.
View 4 Replies
View Related
Jan 21, 2008
how to automatically set a text box size to display text contained by right-clicking the textbox and put a check in the auto-size box under "Alignment".
However I would like to set the widht of the text box and automatically adjust the height according to the number of lines of text. Is this possible by VBA code or othe means?
View 3 Replies
View Related
May 2, 2008
I m working with bar charts and as I've heard these labels can be a bit of a pain. I've got the labels in roughly the right position 90% of the time however that other 10% has me in rolling fits.
My issues
1. A label within the chart area is wrapped on two lines, how could I restrict Excel from wrappign the label
2. A Labels position covers some of the data reported and thus makes the graph messy
how could I find the position of the end of the bar and also the length of the datalabel so I could reposition it. Note I am using 2003 and that I am trying to use
activeChart.seriesCollection(s).item(i).Datalabel.left
for finding the position although this is only really where im getting to. finding the wrapping position and also being able to manipulate the length of the label is proving tricky.
View 6 Replies
View Related
Apr 28, 2008
I am having a problem importing fixed width text files with VBA. I created a user form for a dept to import a number of reports we get as text files into Excel. I imported each line into 1 cell (Column A) in Excel and then used mid functions to split out the columns. Everything works fine on my PC. However, when I use other PCs to import the same files (either off the same shared drive or the PC hard drive) the columns are not splitting in the correct places. Does anybody know what could cause this. Since the columns are splitting based off a fixed number of characters, I'm assuming Excel is somehow distorting a character count while opening the text file. I did notice that if I try to import text files saved on one of our shared drives, they do not import correctly on my PC either. However, if I copy and save the same text file to any of the other shared drives or my PC, it imports with no problems.
View 2 Replies
View Related
Jul 6, 2013
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
View 2 Replies
View Related
Aug 21, 2014
How to insert the column dividers manually--for importing a fixed-width text file into excel? The files I'm having to import consist of dozens and dozens of columns.
View 3 Replies
View Related
May 18, 2009
I need to fixed width-text to column macro and found a reply in the forum.
However, when I apply the macro, the result of zeros in front of figures disappear since the format of value in splitted column doesn't predefined as text
e.g. sample text to split to column:
000122042009ABCDEFG00567
Required result:
0001|22042009|ABCDEFG|00567
when running below macro; result shows:
1|22042009|ABCDEFG|567
(Beginning zeros figures of the first and last column disappear)
Applied Macro:
View 3 Replies
View Related
Mar 5, 2014
I insert a picture in the merged cell(2 lines) of QTablewidget,but the pictures can only display height of one line and becomes very narrow.How to solve it? I write the code in QT with C#.
my codeļ¼
tableWidget1->setItem(3,3,newQTableWidgetItem(QIcon("image2/vm.png"),tr("Ab")));
tableWidget1->resizeColumnToContents(3);
tableWidget1->resizeRowToContents(3);
View 1 Replies
View Related
Jan 28, 2014
Trying to paste image/picture jpg into cell. Don't know enough basic to use earlier found code. Can't just image upload because image floats- not working in cell.
View 1 Replies
View Related
Dec 11, 2011
I have a created a worksheet button using an image holder (because I couldn't get the image to display properly on a normal command button) and when I click on the button, it distorts the picture because of its default zoom feature. I tried resetting the picture to its original size using the .height and .width properties but this produced an error saying the object doesn't support this property (weird because they were available through the suggestions menu that's available when you're coding). If I could just reload the original image, that would do the trick but I am not sure how to do that without using an file path that would only work on my PC and not on other users'.
View 2 Replies
View Related
Oct 14, 2008
I need to move a picture in a cell on a work sheet to a user form image box. I have tried loadimage(range("I3") however it will not work
View 9 Replies
View Related
Aug 27, 2006
I want to add an image to a sheet. The image is to print but I want the data from that sheet to go over the top. I can't seem to get the image behind my data.
View 6 Replies
View Related
Jan 5, 2007
I know how to load a picture onto an image control using VBA code, but how do I clear the picture? (NOTE: I am not talking about using the properties window in the VBE, I am talking about coding in VB)
View 3 Replies
View Related
Jul 19, 2014
I use the code below to insert an image and have it save with the file. I would like for the newly placed image/shape to be selected.
[Code] .....
View 3 Replies
View Related
