Userform & Controls Scroll Height Width
Jan 9, 2007
I have a userform which has vertical and horizontal scroll bars. I want to set the scroll bar width and height properties to the correct value, regardless of the size of monitor screen used to look at the user form. I'm thought of using the code below in the initiliaze event for the user form:
Me.ScrollHeight = Me.Height
Me.ScrollWidth = Me.Width
However, this does not seem to work. I've tried adding 250 (Me.Height + 250)to each measurement, which works, but gives the user with the larger screen a very big scroll area. I wondered if there was a formula based on the application height, that would allow the scroll height to be perfect for the user form regardless of screen size?
Rico.
PS. I also use the following code to set the user form height on initialize. I don't know if that effects anything.
Me.Height = Application.Height
Me.Width = Application.Width
View 3 Replies
ADVERTISEMENT
Jan 8, 2007
I'm using a UserForm.Label to display comments which are of variable length. At the bottom of the UserForm are two CommandButtons. I'd like the gap between the Label text and the CommandButtons to be small (and preferably constant); and the CommandButtons to be at the bottom of the UserForm. This means setting the CommandButton.Top and UserForm.Height as a function of the Label.Height. The crude way I have so far achieved is to use Len(Label.Caption) as the surrogate for Label.Height but it's not very satisfactory due to word-wrap and blank lines.
View 2 Replies
View Related
Aug 31, 2009
I am in desperate need of a macros that sets the heights and widths of columns and rows on a list of provided spreadsheets.
On each of these sheets:
MySheets = Array("FY09 Installation Support", "FY09 Install", "FY09 Purchase", _
"FY09 CF Discretionary Grants", "FY09 CF LOI", "FY08 Purchase", _
"FY08 Installation Support", "FY08 CF Discretionary Grants", _
"FY07 Sup Install Support", "FY07 CF Install Non-LOI", "FY07 Sup Purchase", _
"FY05 CF Carryover Install", "FY04 Recovery Funds", "FY05 Recovery Funds", _
"FY08 Safety Carryover", "FY09 Safety", "FY09 Transport Canada")
I need to set the height of all the rows to 18.00. I need to set the width of all of the columns to 12.00, except for columns A, C, and T, which need to be at a width of 28.00.
View 4 Replies
View Related
Oct 19, 2013
How do I get the actual worksheet height and width?
View 5 Replies
View Related
Jul 22, 2007
I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).
Is there any way to lock the dimensions?
View 7 Replies
View Related
Oct 28, 2008
I need to paste a picture from the Clipboard to my Worksheet. I select the origin and paste it with the macro.
I need to adjust that picture to fit in a defined space from left corner of Range($J$10) to the right corner of
Range($BJ$35)
Actually, i'm using this procedure
ActiveSheet.Unprotect
RANGE("graphique_PL").Select
ActiveSheet.Paste
Selection.ShapeRange.LockAspectRatio = msoFalse
Selection.ShapeRange.Height = 358.25
Selection.ShapeRange.Width = 725.
The problem with it is, the Height and Width is arbitrary to the size of the cells at the moment. I would like to had a procedure to calculate does value. They represent the distance between the defined cells location for the image. Actually, if cells width or height change, the picture is misplaced.
View 9 Replies
View Related
Jul 18, 2007
I need to freeze the column and row height and width for a specific area in spreadsheet, so that it shouldnt be altered in future from any one using this sheet.
View 3 Replies
View Related
Dec 21, 2007
How do I write a short piece of code that defines the specific height and width that I want to assign to an existing chart. The code will be added to existing code that I have that formats the chart in other ways. This needs to be able to work with any active chart selected, not a specific named chart.
View 2 Replies
View Related
Apr 17, 2008
I have vba code to change column width and height into mm.
The code is taking alot of time to run and then hangs my excel session.
The code below calls two sub routines.
Sub Change()
Dim i As Long
With Application
.DisplayAlerts = False
. ScreenUpdating = False
End With
For i = 1 To 23
SetColumnWidthMM i, 3.5
Next i
End Sub...
View 3 Replies
View Related
Oct 30, 2009
This used to (and on some machines still does) work very well, but all of the sudden on my work machine, it is incredably SLOW!! The whole program takes a list of tasks and dates, and creates a wall calendar from them. Then (the offending part, below in code) looks at each cell on the wall calendar and formats it by sizing the height of a merged cell so that the entire task is displayed, then goes on to put a square around it (works fine).
The formating of the cell height/width can take up to 11 SECONDS each cell. What is happening to do this? Again, it USED to, and on some machines still does, FLY through this process. But now it just crawls. Code below, with the 3 offending lines identified.
Private Sub Fit_Height(ByVal Target As Range)
Dim NewRwHt As Single
Dim cWdth As Single, MrgeWdth As Single
Dim c As Range, cc As Range
Dim ma As Range
Application. ScreenUpdating = False
With Target
If .MergeCells And .WrapText Then
Set c = Target.Cells(1, 1)
cWdth = c.ColumnWidth
Set ma = c.MergeArea
For Each cc In ma.Cells
MrgeWdth = MrgeWdth + cc.ColumnWidth
Next
An additional item (clue?) is that, after the macro is done running, it is still unbearably slow to do anything on-screen. Grabbing the column header and changing the column width takes 5 seconds or so before it snaps to the desired width and displays correctly. Closing Excel and reopening it takes care of that problem.
More advancement (as I wait). It seems to be the Application.PageSetup that kills it. As soon as I hit the first Application.PageSetup line, the app grinds to a halt, and almost every line after that that manipulates the screen format or the page format takes 5 or so seconds EACH to process. I put them all at the end, but that really doesn't solve the problem, nor explain it, nor give me a true solution.
View 4 Replies
View Related
Jan 21, 2008
how to automatically set a text box size to display text contained by right-clicking the textbox and put a check in the auto-size box under "Alignment".
However I would like to set the widht of the text box and automatically adjust the height according to the number of lines of text. Is this possible by VBA code or othe means?
View 3 Replies
View Related
May 2, 2008
I m working with bar charts and as I've heard these labels can be a bit of a pain. I've got the labels in roughly the right position 90% of the time however that other 10% has me in rolling fits.
My issues
1. A label within the chart area is wrapped on two lines, how could I restrict Excel from wrappign the label
2. A Labels position covers some of the data reported and thus makes the graph messy
how could I find the position of the end of the bar and also the length of the datalabel so I could reposition it. Note I am using 2003 and that I am trying to use
activeChart.seriesCollection(s).item(i).Datalabel.left
for finding the position although this is only really where im getting to. finding the wrapping position and also being able to manipulate the length of the label is proving tricky.
View 6 Replies
View Related
Jul 6, 2013
I have tried and been searching but cannot find the answer. Is it possible to change the row height and column width for only a selected range in my spread sheet, for example, F13:I23? I am using Excel 2010.
View 2 Replies
View Related
Jan 24, 2014
I'm trying to make this macro work to resize images for our fashion Look Book. In theory, it should work. But of course it does not Here is the code we are using:
Code:
Sub BIGcrop()
Selection.Height = 507.6
x = Selection.ShapeRange.Width
y = x / 2
Z = y - 144
[Code]....
I want all my pictures to have a height of 7.05 inches and a width of 4. The height comes out different everytime depending on the scaling of the template I'm using. I need it to adjust accordingly. I'm open to having the image move into merged cells, as long as it will first adjust the height and then crop the sides (so the orientation stays the same).
View 4 Replies
View Related
Sep 2, 2006
I used to have cells in the extremes of my worksheet filled which resulted in the scroll bars being stretched very thin. Since then, I am only using the top-left part of the worksheet but it is difficult to scroll through since the scroll bars are still stretched. How do I bring them back to normal?
View 5 Replies
View Related
May 16, 2008
I am looking for some code that dynamically (during processing) changes the height of a userform. What I am trying to do is this: I have ten worksheets but only five are being used. I am looking to have a userform with a checkbox for each of the active sheets labeled. I don't want to have to display a form that is basically ten checkboxes with five enabled and five disabled. I want to show only the five active sheets checkboxes with a userform only large enough for the five. If six are active then a userform displaying six checkboxes and a userform large enough for only the six to be displayed.
View 9 Replies
View Related
Dec 30, 2009
I have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.
Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub
I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).
View 2 Replies
View Related
Jul 27, 2007
I am building a form for use in Excel. The form is going to be rather long. I want to use the vertical scroll bar, but I can't seem to get it to work.
Besides enabling the vertical scroll bar, what other steps do I need to take in order to utilize this feature?
View 4 Replies
View Related
Mar 3, 2014
I created the following worksheet when a user opens my workbook:
Project #Project DescProject LeaderStatus Date
1Project Desc 1Jones02/04/2014
2Project Desc 2Jones02/21/2014
5Project Desc 5Smith02/04/2014
[Code] ........
I now need to take the worksheet fields and place them in a userform which will have the following:
View command button which has the hyperlink attached to it followed by boxes with the Project Desc, Project Leader and Status Date.
View 2 Replies
View Related
Jul 2, 2007
I am trying to change the property value of all optionbuttons on userform1 via userform2's deactivate event
Private Sub UserForm2_Deactivate()
If userform1.Controls = OptionButton Then
Value = False
End If
End Sub
View 5 Replies
View Related
Feb 24, 2009
Finding the Column with the MAX Height in comparison with other Columns of UNEVEN Height
I need two things :
1. I have several columns starting from Column B till Column F, each column having values starting from the third ROW.
Ex:-
Lets say Column B contains two values in B3 and B4, Col C three values in C3 C4 and C5, Col D four values D3,D4,D5 and D6, Col E two values in E3 and E4, Column F five values F3,F4,F5,F6 and F7.
So, the answer is F3:F7.
2.I am using 10^{4,3,2,1,0} in a particular portion of a formula, Now the number of elements in the array or in the Curly Braces depends on the number of Columns filled from Column B as explained in the Point 1.
Now, since I have five columns under consideration I have this order as mentioned here {4,3,2,1,0} , I would like to know whether I could make this dynamic, as in if there were only four columns then this would be {3,2,1,0} and if more this array could self-fill and expand..
If that's possible, then how do we use it in the formula, Is it by the virtue of the INDIRECT function?
View 14 Replies
View Related
Aug 15, 2012
I have a userform that has nested multipages (5 in the outer page, 4 in the inner page).
On each of these multipages, I want to have the same controls (sliders) laid out in the same order - but with unique names, named after their tab location, for each control so I can use their value property later in the code.
I've designed the layout and named all the controls on my first sheet (e.g. Slider1Outer1Inner1). I now need a way of automating the replication of these across the other 19 sheets (including the nested inner multipage!); so that equivalent slider for example would be called Slider1Outer1Inner2, Slider1Outer1Inner3 etc.
I'm not sure about coding VBA to act on items within VBA...
VB:
" For each multipage in outer
For Each multipage In inner
For Each Object In current multipage
Copy inner.object -> Next multipage
Inner.object.name = CurrentOuter & CurrentInner & CurrentSlider "
View 2 Replies
View Related
Nov 17, 2008
What's the best way to hide controls on a userform? I have a userfrom with 2 datepicker one for start date and one for end date. I want them hidden until I use checkbox and check it to appear. I am using this code but nothing is work.
View 2 Replies
View Related
Jan 23, 2009
I have taken this code from Access and trying to use it in Excel to lock all the TextBox, ComboBox & CheckBox on the form.
View 2 Replies
View Related
Jul 18, 2012
How to disable different parts of a userform?
I dont really want to go through each control as I reckon it will be handy code to have in the future if I need to add more but so far my code is:
Private Sub UserForm_Activate()
With Sheet2
n = 3
[Code].....
View 2 Replies
View Related
Jul 11, 2008
I have a number of TextBoxes across the page, all set to Visible=False.
If these get filled with data then I need to set Visible=True.
Rather than hard code this individually for each one (which is not a problem, it just looks untidy), can I select each row as a Group (whilst designing the form, not in the code) and then set that Group to Visible=True ?
View 9 Replies
View Related
Nov 4, 2009
I have a userform that contains several textboxes, checkboxes, and comboboxes. There are also some command buttons, one of which says clear all. What I want to do is loop through the controls and clear the contents or change the value to false, depending on the type. I can do this by type the name.value = "", but there are alot of controls. If possible, a loop would be much more effecient.
View 9 Replies
View Related
May 18, 2006
I am trying to create some controls in a userform on the fly based on the data in a sheet. The part of my code is the following:
summaryForm.Controls.Add bstrProgID:="forms.label.1", Name:="LAWts", Visible:=True
With summaryForm.Controls("LAWts")
.Top = 120
.Left = 20
.Height = 18
.Width = 300
.Caption = "Weights: "
End With
Question I is that how can I connet this textbox to a click event or just to a procedure when it is clicked? I tried to use OnAction but it does not work for textbox in a userform. Question II is that how can I find the all properties of a textbox or any other controls? Is there a manuel or reference available on the internet?
View 3 Replies
View Related
Aug 4, 2006
What are the pros/cons of using Userforms with the various objects (comboboxes, textboxes,etc) compared to putting the controls at the worksheet level? Are there things you can do in one and not the other?
View 2 Replies
View Related
Oct 25, 2006
I am trying to transfer data from a worksheet to a user form, so that the end users can edit the data on the user form, save it, and the revised data is sent back to the worksheet. since the worksheet data is dynamic, i am trying to dynamically add controls in the user form. but the form displays only one data.
Set sdel = Sheets("Deliverables")
Set rStartCell = sdel.Range("A65536").End(xlUp).Offset(0, 0)
counter = Mid(rStartCell.Address, 4)
dummy = 0
cnt = 1
'copy data from sheet to the user form
With sdel
'checking if deliverables sheet has any data
' If .Range("A3") <> " " Then Exit Sub
' MyTextBox.Caption = .Range("A3").Value
For r = 3 To counter
If .Cells(r, 1) <> "" Then
Set MyTextBox = Controls.Add("Forms.Label.1", "lbl" & cnt, Visible)
MyTextBox.Top = topadd + 30
MyTextBox.Left = 20
MyTextBox.Width = 150
MyTextBox = .Range("A" & r).Value
cnt = cnt + 1
Else
dummy = dummy + 1
End If
Next r
End With
View 3 Replies
View Related
