I need to email a page from a worksheet to a series of people and am currently using the following
Worksheets("Report").Activate ActiveWorkbook.Save
Dim wb As Workbook Dim strdate As String strdate = Format(Now, "dd-mm-yy h-mm-ss") Application. ScreenUpdating = False ActiveSheet.Copy Set wb = ActiveWorkbook With wb
however, I also need the worksheet to be email to the person currently running the macro (i.e. when they email it to the others, a copy is sent to thier own inbox too), is there any way in which this can be done?
The user's email address could be formed from data in the spreadsheet, if there is an easier way to do this (i.e. email address is based on a cell in the spreadsheet).
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I want to do is have a formula that will return a result if the cell contains a full stop "." and the at symbol "@". Something like a countif contains, but I'm struggling to find a solution where it contains both symbols.
I'd like the formula to return a 1 it finds both symbols, and a zero if it doesn't find both symbols.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
I have a simlple macro to add a new customer to a list using a form. One of the columns of the datra beig added is an email address. When entering the data the email address just appears as text, but i want it to be the email address link you could click on and it opens up an outlook email. Just clicking into the cell and tabbing out changes this into the format i want, but wondering how to i get the macro to do this?
I have about 5000 email addresses located in about 5000 different text areas, some of the text areas also contain 2 email addresses. How could I pull/extract the email addresses out only into its own list? Example;
The lines around the text block represent a field such as A1. Note all the text is contained in box A1. _______________________ { Name: Joe } {Address: 123 Blow St } A1 {Email: Joe123@sam.net } _____________________ {Name: Jan } {Address: 124 Cat St } A2 {Email: J123@nbadd.net } -------------------------- I need to just get the email addresses pulled out.
I have the below code to email a specific sheet to an email address, however the email stays in the outbox and isn't sent. Is there something missing from the code or is it a setting issue with my email? I'm using Outlook 2010.
I am trying to send an automated email by use of a "email" button. What I want it to do is to pop up a input box that will ask me who I want to send the email to, and once I hit ok it will send open up outlook and send the email. I have the code to work if I want it to be sent to a specific email address, but I can't seem to get the email address entry part to work. I will attach my code as it lays right now.
Private Sub CommandButton2_Click()'Need to reference: Microsoft Forms 2.0 Object LibrarySet OutApp = CreateObject("Outlook.Application")OutApp.Session.LogonSet OutMail = OutApp.CreateItem(0)strbody = "This is the most up to date copy of EAS Tracking 2.0 as well as the Resource Planning Sheet."attachmnt2 = "C:My DocumentsResource Planning Sheet_External.xls"On Error Resume Next'?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|? BELOW IS WHERE I CAN'T GET TO WORK!!!With OutMailDim range As Longrange = Application.InputBox("How many copies do you want?", "Number of Copies").To = range.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt2).Display.SaveEnd With'__________________________________________________attachmnt3 = "C:My DocumentsReport DataWork Request Tracking Data FolderEAS Request 2.0.xls"On Error Resume NextWith OutMail.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt3).Display.SaveEnd .........
I have a formula that checks a cell containing an email address, and if the format is not the office standard, displays a message. We now allow 2 variations, and I want to check for the second condition as well.
Basically, the email address is in the format
"Firstname"."Lastname@here.com
and the formula just checks the address against a lookup of names, the only seperator being period.
I now also need to be able to check for an underscore, and I don't know how to combine the conditions.
The existing forumula is
=IF((LEFT(A2,FIND(".",A2)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
and of course the underscore is easy, too
=IF((LEFT(A3,FIND("_",A3)-1))(LEFT(E3,FIND(" ",E3)-1)),"Check Email Recipient Main Database page column BQ:BR","")
but when I try to combine them, I get an error, or at best a VALUE output.
I think I need to nest them, but maybe there is a way to combine the conditions in or use "OR" and still get the "check email" message" ??
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
It worked well at the time and continues to work well.
The problem I have is that I've copied it for use in a new workbook and for some reason it's not picking up email addresses and storing them in the string "stemails", so that when the email is created there are no addressees. Column BA does have email addresses in it however.
I have a list of email addresses. Most of them are in the format of: firstname.lastname@domain.com
There are about 200 of them. I wish to extract the firstname and lastname into seperate columns so i end up with:
Code: A | B | C -------------------------------------------------------------- Firstname | Lastname | firstname.lastname@domain.com
I am sure I came across something before that did something like this. but I was not able to find it. Any macro or script to perform this extraction.
note that some of the addresses are in the format: name@domain.com In those cases I would like just everything before the @ put into column A. I will then manually figure out how the value is to be broken up into firstname / lastname.
sort out the email address as per the company name using Vlookup or any other formulae other than using text to column on "Email Adress" and then doing a Vlookup from the reference table.
I have a combined sentence with email address at the end. There is a space between email and other part. For example, in Cell A1, it's: PO Box 132, Washington Ave, dennis789@yahoo.com. In cell A2, it changes to: 12 DW Road, georgeyiui@hotmail.com. How can I separete these emails out?
I have a list of email addresses. Most of them are in the format of: firstname.lastname@domain.com
There are about 200 of them. I wish to extract the firstname and lastname into seperate columns so i end up with:
A | B | C -------------------------------------------------------------- Firstname | Lastname | firstname.lastname@domain.com I am sure I came across something before that did something like this. but I was not able to find it. Please let me know if you can provide a macro or script to perform this extraction.
Please note that some of the addresses are in the format: name@domain.com In those cases I would like just everything before the @ put into column A. I will then manually figure out how the value is to be broken up into firstname / lastname.
I am currently trying to automate a receipt system. I have successfully managed to create an email based on calculated Excel data. The email is created using the following routine.
callref="12345" strbody = "The main text of the email"
Set OutApp = CreateObject("Outlook.Application") OutApp.Session.Logon Set OutMail = OutApp.CreateItem(0)
On Error Resume Next With OutMail .To = "John Smith" .BCC = "" .Subject = "Test email receipt - " & callref .Body = strbody .Display 'or .Send - still developing!!! End With On Error GoTo 0
Set OutMail = Nothing Set OutApp = Nothing
My problem is that there will be several people using this system so I would like to include a reply address which is different from the sender. Alternatively, I would like to send the email from a different account (but I have to assume that the users will have their own email accounts open).
Is it possible to create a rule that every time I type my name, for my e-mail address to pop up in excel instead?
For example, if I type "purple1686", I want "12purpleexample@domain.com" to show up as a hyperlink to my default e-mail program.
I am also curious if I was to write "my website" is it possible to make it a hyperlink to "www.purple1686example.com"?
Those two first may be easy to answer, so here is the challenging part for me:
Can I make that happen as a rule on every spreadsheet I open?
I don't know if I should make a template, or use a formula? The ideal scenario would be if there was a way to do it through conditional formatting.
I have used conditional formatting to change the color of a word every single time I open a new template and paste the words into it, or even by typing them out.
I've two columns, one being the first name and the second being the last name. Is there a way that I can convert these two columns into the correct format for the email address ? Rather than having to manually do this.
When I type a eMail address, such as: " myemail@hotmail.com " into any cell and then touch enter, it automatically becomes a hyperlink coloring it blue and underscored. I do not want it to be a hyperlink, for when it is a hyperlink, I have to click on remove hyperlink.
a formula to create an email address. The person's name is in cell A1. The email addresses are all the last name + first initial followed by @ and the domain name. For instance, if name is John Doe, the email address would be doej@emaildomain.com.
The problem is, some of the names in the list contain middle initials, so I can't figure out a reliable way to discern the last name.
I know I can create a custom function in VBA using InStrRev to separate the last name, but if there is a way to do it using the functions already available in Excel, I'd rather do that.