Here is a code line that works
.To = "giordano.bruno@gmail.com"
The following is passed over by the code, but does not send an email
.To = Recip
Recip is a variable taken from a cell value and, when I hover the cursor over it, shows "giordano.bruno@gmail.com" complete with inverted commas.
Is it possible for a Macro to read a cell say D:11 and copy that email address and send the active sheet to that email?
View 9 Replies View RelatedI have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
[Code] .....
I am trying to send an automated email by use of a "email" button. What I want it to do is to pop up a input box that will ask me who I want to send the email to, and once I hit ok it will send open up outlook and send the email. I have the code to work if I want it to be sent to a specific email address, but I can't seem to get the email address entry part to work. I will attach my code as it lays right now.
Private Sub CommandButton2_Click()'Need to reference: Microsoft Forms 2.0 Object LibrarySet OutApp = CreateObject("Outlook.Application")OutApp.Session.LogonSet OutMail = OutApp.CreateItem(0)strbody = "This is the most up to date copy of EAS Tracking 2.0 as well as the Resource Planning Sheet."attachmnt2 = "C:My DocumentsResource Planning Sheet_External.xls"On Error Resume Next'?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|?|? BELOW IS WHERE I CAN'T GET TO WORK!!!With OutMailDim range As Longrange = Application.InputBox("How many copies do you want?", "Number of Copies").To = range.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt2).Display.SaveEnd With'__________________________________________________attachmnt3 = "C:My DocumentsReport DataWork Request Tracking Data FolderEAS Request 2.0.xls"On Error Resume NextWith OutMail.Subject = "This Weeks Reports".Body = strbody.Attachments.Add (attachmnt3).Display.SaveEnd .........
If a cell changes to true i want it to send an email to the address that is in another cell,
For example if F5 CHANGES to true then send email to address in G5,
From here i can add in the subject line, and body i just cant figure out how to get it to send to a specific email address based on the cell value, and also only do it once, when it changes to TRUE rather than everytime the sheet is active, so i would require a macro to constantly be running, or run of off the cell when it changes
I have a template invoice in excel. What I want is a macro code that when it is run the open template invoice should be sent to a specific email address !!
View 5 Replies View RelatedI have a form in excel (very simple) that I need to put on the web - People can then fill out certiain bits of the information and the idea is that they then click on the button to email it back to me. Ie complete it there and then and email it straight away so that they don't need to save it etc.
I can't for the life of me work out how to do this! I've managed to get the macro to open an email with the correct details on but not paste in the information so am at a complete loss and appear to be going round in circles!
I need to email a page from a worksheet to a series of people and am currently using the following
Worksheets("Report").Activate
ActiveWorkbook.Save
Dim wb As Workbook
Dim strdate As String
strdate = Format(Now, "dd-mm-yy h-mm-ss")
Application. ScreenUpdating = False
ActiveSheet.Copy
Set wb = ActiveWorkbook
With wb
however, I also need the worksheet to be email to the person currently running the macro (i.e. when they email it to the others, a copy is sent to thier own inbox too), is there any way in which this can be done?
The user's email address could be formed from data in the spreadsheet, if there is an easier way to do this (i.e. email address is based on a cell in the spreadsheet).
I used Scheduled Task to set up my spreadsheet to open daily. I have the code with assistance to pull out the due date items and place them into an email.
I have come across XLSTART/AUTOEXEC/ACTIVATE...ETC...
But cannot figure out the code that will automatically "enabling macro" once Scheduled Task opens the spreadsheet?
Then once the macro runs, the email with the due dates, how can this auto send without user interaction?
(currently I would have to hit send)
I am trying to make the process totally automated to open the spreadsheet at a certain time, send the email with due dates and close the spreadsheet.
Following code in ThisWorkbook--
Private Sub Workbook_Open()
Check_Date_Send_Mail
End Sub
Code in Module1--
Option Explicit
Sub Check_Date_Send_Mail()
Dim wbBook As Workbook
Dim wsSheet As Worksheet
Dim rnDate As Range, rnValue As Range
Dim stAddress As String, stMsg As String
Dim stRecipient As String, stSubject As String
Dim stPost As String
Set wbBook = ThisWorkbook
Set wsSheet = wbBook.Worksheets("Sheet1")
With wsSheet
Set rnDate = .Range("d2:t23")
End With
I have an excel sheet where automatically live data comes in.
When the cells reach a certain value the value in cell R1 becomes 1.
I want to make a macro in vba that sends me ONE email if the value becomes 1.
I tried :
Public Function MailS(mailtrigger As Double) As Double
If mailtrigger = 1 Then
Call makeandsendemail
Application.Run "makeandsendemail"
MailS = 1
Else
MailS = 1
End If
End Function
But this code send millions of emails.
I need an email to be sent to the last period teacher when a student earns less than 265 points. Some students go to a different class at the end of the day, so the teacher needs to be notified.
I have an if formula set up to create a yes statement: If(T26<265, "yes", ""). I need for an email to send when U26 is set to yes.
Actually I need an email to be sent anytime any cell in range (U5:U40) is yes, and I need it to be sent to the email address listed in the corresponding v column.
I have the following vba codes :-
Sub Mail_Cascavelle()
Range("b2") = Format(Date, "dd/mmmm/yyyy")
Const mydrive = "R:"
Const mydir = "Credit AdminSeebaruth RakeshSEARCHES NO SIGNATURE"
Dim myname As String
Dim ss As String
myname = Sheets("sheet1").Range("e5").Text & Format(Date, "dd-mmm-yy") & ".xls"
ss = mydrive & "" & mydir & "" & myname & ".xls"
Application.DisplayAlerts = False
ActiveWorkbook.SaveCopyAs Filename:=ss
[code]....
I am currently sending email to a few people from excel using the outlook and excel connectivity.
The issue is I have to individually define a module for each person I send an email to and it is extremely inefficient.
My attachment makes it clear.
There is 3 tabs in the workbook.
Tab 1 (Method 1) is what I am currently using and I know it extremely inefficient
Tab 2 (Method 2) is what I would like to use
* When I select a cell and click send email, I would like for that person to be sent the email
* When I select a range of cells, I would like all of those individuals to be sent an email
Tab 3 (Email) is what I would like Method 2 to use - this tab includes a subject line and the email body. It sends the message in the email tab to the recipients I have selected in Tab 2.
Basically I have a spreadsheet to monitor behaviour in a high school. There is a column in the sheet with the heading 'PT Action Required?' which has a drop down menu where users can either select "Yes" or "No".
I would like the spreadsheet to automatically send me an email to inform me if a user selects "Yes".
So far I have:
[Code] ....
However, nothing happens.
I have tried a number of things, but have not been able to figure it out. It may not be available with this particular code, but I am not sure what limitations this code has. Does anyone know how to include the contents of a particular cell in the subject line? Currently the subject line says "Notification." What I am looking for is for the subject to say "Notification - John Doe" where John Doe would be the contents of cell D13.
View 2 Replies View RelatedI am sending an email when the value of a cell changes, [url]
I am using the following code in my worksheet....
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
If Target.Cells.Count > 1 Then Exit Sub
On Error GoTo EndMacro
If Not Target.HasFormula Then
Set rng = Target.Dependents
If Not Intersect(Range("AE7"), rng) Is Nothing Then
If Range("AE7").Value < 20 Then EmailOut 'MyMacroName
End If
End If
What I would like to do is increase the range that this applies to.
Range from AE7 to Range Y3:AE250.
I would like to Include the Range A3:A250 in the subject/body.
So If AE7 has changed, A7 (along with some text "This cell has changed, do X Y Z") would be somewhere within the email.
Does anyone know the code to send an email to a set list of six recipients when cells in a certain column in a worksheet reach a certain value greater than another. Let me explain a little - The action to be performed is date-based.
For Example:
When the date cell L2 is 30 days later than the date in K2, send an email with subject containing data from cells B2 and C3.
However, this has to work for columns K and L in their entirety, as both columns contain a list of dates...
I have created a detention tracking sheet for my school. I need an email to be automatically sent to the teacher when a student does not show up for detention.
Here is what I have currently coded, but the macro is not running, and the email is not being sent. I do not understand why.
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes" ....
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code:
If Range("B" & a) = "Y" Then
If citChev "" Then .Attachments.Add citChev
End If
If Range("C" & a) = "Y" Then
If citMits "" Then .Attachments.Add citMits
End If
If Range("D" & a) = "Y" Then
If citToyo "" Then .Attachments.Add citToyo
End If
If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.
I have Excel WB / Sheet with filled columns A (serial No.), B (name), C (e-mail adress), D (problem), E (solved / unsolved) and now I want that Excel automaticly sends e-mail notification to specific e-mail adress (column C) when its / his problem is solved (column E).
View 2 Replies View Related send the sheet to an email address based on the email address in a cell.
The cell populates from a dropdown list a user selects.
The email will be sent to myself, and one authoriser. If a second authoriser is required then the first authoriser will send this on. I'm trying to make this simple, so when a user clicks a 'send' button on the form this happens automatically.
The code I'm using to send to myself is
Application.Dialogs(xlDialogSendMail).Show arg1:="bibbyd01@myemailaddress.com", _
arg2:="Auth Details"
Nice and easy. So how do I replace that email addres with the email address in a cell? I assume I have to create a DIM to hold the data, then use it to populate the address field?
I'm using excel 2007 if it makes any difference.
I need to send an email reminder to teachers on the day they have duty. I know how to set up an email that sends on a certain date, but I am unsure how to code it when the date changes. I have attached the spreadsheet.
In cell A 53, I have the date November 24th. In cell C53, I have the email address of the teacher doing duty that day. In cell F53, I have the date November 25th. In cell, I53 I have the email address of the teacher performing duty that day. On November 24th, the person in C53 should receive a reminder email. On November 25th, the person in cell I53 should receive a reminder email. I will have spreadsheet for every month of the year. So there will be LOTS of changing dates. How do I code this when the date keeps changing?
I am struggling to find a macro which can look at a name in column 'BT' and search it in the address book of Outlook to then place the email address of that person in column 'ED'
There are 35,000+ people in the address book and there may be over 5 email addresses for one name, so is there any way a message can appear for the user to select which email address is correct if there is more than 1 contact for that name?
I am using the following code and it works great the only problem is that when I have more then one email address in the same cell it will not send the email. Even if I seperate it with a semicolon. It work fine if I have just one email address in the email field. How can I get it to send the same info to different email addresses.
View 4 Replies View RelatedI have created a user Form where a user can enter all the details like (First name, last name, Email ID etc...). the entered data is submitted on Sheet1 and it is working for me.
Now which I want is the is it possible to pick up the last email id (Column D) and send an automatic email where email will be sent the last recipient?
Actually I want is that when a user will fill up the form I want to send him/her an email.
How do I pull only the email address from a cell that is like this:
annavstone22@yahoo.com,anna,stone,,,,,,,,,,,2011-10-20 17:31:08
How would one retrieve an email address in a cell if it appears randomly ?
In Cell A1, let's say the content is:
Hi My name is Peter, my email is peter@mrexcel.com
In Cell B2, let's say the content is:
Good morning, you can reach me at isabelle@yahoo.com
What I was thinking is maybe start by finding the @ with =Find("@",A1) this will give me the position of the "@".
How can I tell excel to give me the string before and after the @?
I want to do is have a formula that will return a result if the cell contains a full stop "." and the at symbol "@". Something like a countif contains, but I'm struggling to find a solution where it contains both symbols.
I'd like the formula to return a 1 it finds both symbols, and a zero if it doesn't find both symbols.
On a worksheet called "Contact Info" column A starting in row 2 I have a list of names (variable length). In Columns B2-D I need the email address, work phone number, and cell phone number.
View 5 Replies View RelatedI have a simlple macro to add a new customer to a list using a form. One of the columns of the datra beig added is an email address. When entering the data the email address just appears as text, but i want it to be the email address link you could click on and it opens up an outlook email. Just clicking into the cell and tabbing out changes this into the format i want, but wondering how to i get the macro to do this?
View 3 Replies View Related