Return Heading Of Column With Maximum Value
In attached example, I have 3 columns of fractions with a final row of sumtotals (taken from elsewhere). I test to see which column has the maximum value in each row and allocate the result with the column's heading. Sometimes, two or more columns have the same max value. In this scenario, I wish to select the column heading that has the largest sumtotal.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Return Column Number Of Heading
I have range like (3E:3K) in this range are only 2 different expressions. "Result and " forecast". I wanna look from left to right for the first cell with the string "forecast". And than I want to work with the column of this cell, only this column. How do i do that? Edited I corrected the coordinates. I want to look in a specific column line (Nr.3) from there the first Cell with "Forecast" and from that String the row number. They following 4 posts were based on wrong informations by me.
View Replies!
View Related
Lookup Row & Column Heading To Return Corresponding Header
I have a list of names and the chores they need to do on a certain day. I need a formula that returns the chore the person needs to do when the date is filled in. Ex: Sheet2 Col:A has names filled in A2:11 , row B1:J1 has dates that you would input. formula goes in B2:J11 Sheet1 is the master with all the data the formula would be pulling from. column A2:A11 has the names , row B1:S1 has the chore that needs to be done. B2:S11 has the dates already filled in.
View Replies!
View Related
Find Value In Row, Then Return Heading Above It
I have a 10x10 table. First row contains column titles (plain text, hardcoded). Each line below them has a 1 in *just one* cell. So, each line contains 9 zeros and one 1. In the 11th column I want to check which column has the 1 in it and return the column's title. So, if the 5th row has a 1 in cell E5 I should get, in K5, the value of E1 (the title of the E column that is).
View Replies!
View Related
Return Heading At Point Total Is Met
I have a spreasheet with partnumbers listed in column A, a safety stock value in colum B, a restock date in column c, and quantities listed by month needed in the following columns, i.e.: A B C D E F G Part # Safety Stock Restock Jan Feb Mar Apr 123abc 50 Feb 20 35 20 10 In the example above, it is apparent that the safety stock will be delpeted in Feb. I am trying figure out how to calculate the month that the safety stock will be depleted and show this in another cell.
View Replies!
View Related
Return Heading Ascociated With Date Found In Table
Attached is a very small sample of a workbook that looks at community impact; before, during and after a project. The source data (not shown) is down loaded from a system that can only supply the date in reverse order (see column A). i.e. 20080229 = 29-Feb-2008. I've applied a conversion in column "C".... = DATE(LEFT($A2,4),MID($A2,5,2),RIGHT($A2,2)) The 'properly' formatted date is then used to determine when on the scale of observation that given date falls. e.g. the number of weeks before, during and after the project. This is determined by the 18 week date 'matrix/ array' in columns F to X the red box is used to input the project start date, (& assumes the project runs to its normal 6 week time scale, it get REALLY messy if the boss prolongs or cuts short the project!) From the result various figures and a graph using the properly formatted date are calculated, produced and presented showing.... The scale of the problem {before} The impact of the project {during} The lasting efftectivness {after} You can see that I've managed a 'workaround' for the limit on the number of IF statements allowed in one formula using a rolling formula in columns; B then Z - AQ. This works OK, but!! combine that with the other formulae doing the impact calculations and 20000+ rows of data (with the acssociated workings in B + Z-AQ) the effect is to make make the file over 15Mb for 1!! worksheet, (the limit for emailing on the jobs system is 3Mb!!) & just to really make it scary sometime there are 2 projects on the go at once. Before I created the attached the user responsible for these graphs and calculations manually counted dates & typed/copied & pasted the week number/tile, initially several days work followed by half a day every weekly update!
View Replies!
View Related
Search Table & Return Heading Of Found Value
In a large spreadsheet that receives external data, I have codes (U, N or V) allocated at various times to different rows as shown in sample worksheet attached. Elsewhere in the spreadsheet, I need to display (for later export) these codes along with their respective number in a sorted list. Please review the attached: In the spreadsheet you'll see a column of codes, the next column is the data reference number, then to the right is three columns, one for each code. As displayed in the sample book attached, each Code column is to display the data reference number (from column 2)that matches that column's code. What formula can I use to list these numbers in the appropriate columns?
View Replies!
View Related
A Go To Column Heading Widget
I'm really tired of searching manually for the column containing a heading, as I have many columns. Isn't there a "simple" way to make a dropdown containing all the column headings in row 1, and upon selecting the heading of interest, have excel "go to" that column (maybe using a Find macro)?
View Replies!
View Related
Get Column Number Of A Heading
My problem is that the sequence of Colunms in my worksheet, with the similar data, keep changing. For example, an "Employee Name" may appear in column 3 or 5 etc. For this reason, I want to select a cell within any column by its heading rather than "A", "B", "C" etc. For example, I want to select a cell as below: Cells(5, "SN").Select - which of course is not accepted by Excel Similarly, I want to use Range with a column by its heading. Or I will like to know the Column number for the column with the heading "SN", for example.
View Replies!
View Related
Insert Column At Specified Heading
I have a row of Headers A1 thru AO18. What I'm trying to do is have a small macro to go out and find "template" whichever column it may be in and insert a column to the left. I can make Excel insert the column to the left but obviously I can't have a fixed column designation because it will keep moving to the right of it and it won't work anylonger or I should say it doesn't put the column where I want it.
View Replies!
View Related
Macro To Insert Column Heading To All Worksheet
Pls help me do a macro that upon clicking a button it will copy and paste a column heading (located in Row1 of Sheet1) to all non-empty worksheets (Sheet 2 to Sheet N) in the workbook simultaneously. Note that each worksheet has no column heading and has the same number of columns as that of the column header in Sheet1. Worksheet 2 to Worksheet N contains data extracted daily.
View Replies!
View Related
Insert A Blank Column Next To Heading Columns
I am doing a lookup, populating a column (which works although slowly) then (in this part) doing a search on the header row.. If the heading contains the word "Category", I wish to insert a blank column next to (the column containing the heading), colour it yellow then look for the next heading and repeat if found. It appears to clear my first row so I must have my columns referred incorrectly as rows Dim FWord As String Dim i As Integer Dim lCol As Long Dim MyString As String . . FWord = "Category" lCol = Range("A1").End(xlToRight).Column For i = 1 To lCol Cells(1, i).Value = MyString '
View Replies!
View Related
Count If Column Heading Matches Criteria
I have data (coming straight out of another system, so whilst is seems messy, its the easiest way to have it in Excel).... where there are a number of rows (one for each employee) - then every column represents a date in the month (so there are about 30 columns)....the cells contain a number of hours worked by that employee for that day. I have figured out how many hours they worked for each day of the week, but my client now wants to know: for each employee - how many Mondays did they work?- how many Tuesdays? and so on I am happy to figure out the day of the week for the first date in the month and then manual set up another column heading above the date that tells me what day it is - but I feel that Excel may actually be able to work out what day of the month it is - although the dates come across from the other system as text - April 26, 2006 etc... So I would like a summary in my sheet that has column headings Mon, Tues, Wed, Thurs, Fri, Sat, Sun and then for each row for each employee - I would like the number of days that employee worked for the month by these Days of the Week. I have looked at Count if - but I need to be able to select the range of cells to count, and also the range of cells to evaluate for the criteria and I cant figure it out!
View Replies!
View Related
Find Current Date Heading Column
I have created a simple command button for tallying that will increase the count in the output cell by one every time it is clicked. It has basic code like this: Private Sub ProductRegistration_Click() [D4] = [D4] + 1 End Sub On top of that, I want the output cell of this command button to switch every day. In this case, it would move to E4 tomorrow. The columns are dated but I can't figure out how to get the output cell to automatically change with the system date so I don't have to manually change it every day.
View Replies!
View Related
Count Number Classes Taught For Each Column Heading Name
This is a double IF() to me. I just can't figure it out. I download a list of classes taught by a number of teachers. I want to summarize how many of classes taught by each teacher. I have tried many variations of countif() but can't seem to figure out how to do both. Example copied in below: ClassesTeacher Classes Taught Angela Barbara Bob mathAngela math 2 0 1 englishBarbara english 0 2 0 musicBob music 1 0 1 mathBob englishBarbara musicAngela mathAngela englishAngela musicBarbara mathBob englishBarbara musicAngela mathAngela englishBarbara
View Replies!
View Related
Return MAXIMUM Based On Criteria
i have a spreadsheet like the following A B C Country Revenue Month 1 UK 10 Jan 2 France 20 Jan 3 US 30 Jan 4 UK 25 Feb 5 US 35 Feb 6 France 5 Jan and so on... So where country = UK, France or US I want to retrieve the MAX revenue from all months and which month it was in. Eg UK max revenue was in Feb of 25. I am not sure how to apply the max formula with criteria. Is there any way to do this?
View Replies!
View Related
MAXIMUM Function Limit: Return A Value?
What I'm trying to do is get the MAX function to return a value, but that value needs to come before the values reach zero. It's a cubic equation that basically starts, at the beginning of the data range, under 10 then hits zero and ends up near 30 at the end of the data range. The end data range max doesn't matter to me if the data range hits zero along the way. Is there any way to make the MAX function stop at a certain value, or is there another function that could accomplish what I'm trying to do?
View Replies!
View Related
Return Maximum Date Or Blank
I am currently using an array to return the MAX date value. This formula will enter 1/0/00 if the referenced cells are blank. I'd like the furmula to LEAVE THE CELL BLANK if the referenced cells are blank. {=MAX(IF(Bid_Circuits=$A45,Bid_Trim_Completed,""))}
View Replies!
View Related
Return Cell Address With Maximum Value
I have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4) It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
View Replies!
View Related
Return Data Corresponding To Minimum & Maximum
Please see attached file which is data for horse races (this is a small example of the data i will be working with). I need to find the largest values from the MIN and MAX column (shaded Grey) range for each race. I want to be able to add a function that will allow me to quickly identify which horse has the largest number in both the MIN & MAX columns example on spreadsheet is highlighted RED. It would be handy if it would inform me if the criteria has been met by highlighting it or by placing some text value in an adjacent cell on my spreadsheet i have used the example "Y". It would also be beneficial if that race be deleted in its entirity if there are no horses which meet the criteria above or similary if all other selections within that race be deleted if ther is a horse which meets the criteria. If there is a selection within that race i will need to keep the row that includes the heading which is coloured blue on the attachment. I will be working with 20,000 or more selections at a time so it is important that they can be identified quickly for ease of use. I have tried the functions i know such as MAX and LARGE but this requires me to do alot of work when you consider the ammount of data i'm required to work with.
View Replies!
View Related
Lookup Maximum Value & Return Corresponding Row
i have a matrix index| a| b| c| 0001 |1| 2| 2.22| ( probably it will be much clear to see the attachment) I need to lookup for the largest number in B2:D2 (in this case 2.22) and return the corresponding header ("C"). I though it would be simple with hlookup() and max() but i can't make it work.
View Replies!
View Related
Find Heading To Match CheckBox & Hide / Unhide Column
I need to work with the run times for some equipment. This is just hours and minutes and I get the raw data as like "Pump # 1 - 35:30". This is not date/time data per se, just a raw number of hours. I thought I would format the cells as hh:mm and for 15:00 I would just enter 15 to save time. No go, that becomes 1/15/00 00:00 and displays as 00:00. I discovered that if I just leave the formatting as general and enter 15:00 it works fine and displays right but the formula bar says 3:00 PM (Excel figured to format it hh:mm). When I enter 30:00 it again seems fine but the formula bar says Excel stores it as 1/1/00 6:00:00 AM (Excel figured to format it [h]:mm:ss but I deleted the seconds). I can just set the formatting as [h]:mm to be consistent and enter the full 15:00 but I guess that after working that out I am just curious - can Excel store hours:minutes as just hours:minutes without turning it into a meaningless date? And without converting it to a decimal number? I don't want to total 1:30 + 1:45 = 3.25; I want the total to be 3:15. Again, it appears that [h]:mm will do what I need but it just seems unelegant to me that it is stored as some weird date and I wonder if it will cause a problem at any point.
View Replies!
View Related
VBA Macro To Return Maximum Value In Text Form..
I am a novice to VBA in excel, i have a table of more then 5000 rows. I would like to find a maximum value from each row and return the column title as "GL_Weld" or "Bend" or "Header" into another worksheet cell. i.e First Row max value = 0.011510 should return "Bend" into another worksheet GL_WeldBendHeader 0.0001700.0115100.000500 0.0000000.0007800.000000 0.0002400.0110700.000480 0.0000000.0006600.000000 0.0000000.0037700.000000 0.0000000.0000100.000000 0.0002800.0108700.000480 0.0000000.0007100.000000 0.0002000.0112900.000490 0.0000000.0008400.000000 000.00002 00.000310.00001 000.00004 00.00030.00002 000.00001 00.000270.00003 000.00002 00.000260.00004
View Replies!
View Related
Lookup Maximum & Minimum. Return Corresponding Row
I have searched your forums and thought I had found a sufficient answer but could not get the vba to work. So any help is greatly appreciated. I am trying to determine a max value from a list then put that value in a cell. Next I want to determine how many times and on what day that max value occured. From there take the value and concatenate them adding a "," between them I have attached an example. I would like the values placed in cells F1 and H1 (the other is a min value and when it occurred)
View Replies!
View Related
Return Values In Range Based Upon Relationship To Maximum Value
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance. The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
View Replies!
View Related
Return Only Unique Text From Another Sheet Along With Correlating Minimum And Maximum
I have, on one sheet, a list of incumbent employees that includes the following columns: Job Title [text] and Salary [number]. I am trying to automatically populate a second sheet with columns designating: A list of each unique job title (no duplicates), the maximum salary corresponding to each unique job title, and the minimum salary corresponding to each unique job title. Lastly, I'm an attorney dealing with confidential client data, so I'll have to go through a lot of trouble to post an example... but I'll do it if necessary.
View Replies!
View Related
Take Value To Left Of Maximum Value In A Column
Trying to grab the value to the left of the max value in a range of cells. Wasn't sure if I needed to use the offset function, I tried the vlookup function but the value i'm searching for is in the 2nd column, not the first. I can't download files at work, so if you could examine the example spreadsheet i uploaded, and then type the formula I should use in the post.
View Replies!
View Related
Cell Of Maximum Value In Another Column
I have a problem looking up the cell at which a maximum value in a curve is located. I have attached a workbook with an example of my problem (this is scaled down to limit the size of the attachment – my usual string of data is 5000 rows long). Column A is the time and all subsequent columns will contain force values (as shown in columns A and B) which create a similar sharp curve. Ideally I need to be able to lookup the time point (column A) at which the maximum force value occurs for each curve or if this is not possible the row number in which the maximum force value occurs. I would like to be able to do this using a formula rather than a macro if that is possible? I have tried using a number of excels lookup functions and read through the examples on the site but have had no success.
View Replies!
View Related
Maximum Value In A Column In A Pivot Table
I am new to working with Pivot tables, and am working on a data set of survey results. We'd like to build a heat chart into the pivot tables for each column of data. To do this, I need to determine what the maximum and minimum values in each column are, and base the cell coloring on the difference between min and max values by quartile. Ideally, this would be able to update when the column headers change (from a list of departments, to countries for instance).
View Replies!
View Related
Lookup Row In Column & Heading In Row
I'm trying to enter info in a cell based on what is entered in two other cells. So I have a dropdown box for the species on another sheet as well as a dropdown box for rail sizes. Then I have to crossreference them to come up with an upcharge number. Sorry for my basic lingo. I hope it's understandable.
View Replies!
View Related
Finding The Maximum Value In A Column Based On A Condition
This should be simple to do but I can't figure it out. I have a database that lists operating room numbers in one column and the length of the surgeries performed in those rooms in another column. I need a formula that will give me the longest OR time for a given room. For example the room numbers are in column A and the OR times are in Column B. I've tried something like
View Replies!
View Related
Return Maximum Of Active Cell & Arbitrary Value To Cell
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050. It should do this on the click of a button.
View Replies!
View Related
Find The Maximum Value In One Column And Retreive The Name Of Cell In Corresponding Row
I spent couple of hours trying to figure this out, but without success. Please check the attached example. I need a formula that will find the max value (number of views in English anguage) in the column "I" and display the corresponding "Headline" value in the column "B". In the example it is "Headline 5". I can not change position of the columns, i.e. "B" must remain "B" and "I" must remain "I". I experimented with Index and vlookup but to no success. I have outlook 2003.
View Replies!
View Related
|
TRACKER
