Return Maximum Date Or Blank
I am currently using an array to return the MAX date value. This formula will enter 1/0/00 if the referenced cells are blank. I'd like the furmula to LEAVE THE CELL BLANK if the referenced cells are blank. {=MAX(IF(Bid_Circuits=$A45,Bid_Trim_Completed,""))}
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Return Earliest Date Without Corresponding Blank Cell
I have a date range, containing blanks and values. I need a function to show the earliest date that contains a non-blank value. The function should be robust enough that I can sort by date and still show the correct data. Example...(correct answer would be 10/26/2006) Date ... Value 10/23/2006 10/24/2006 10/25/2006 0.08 10/26/2006 0.10 10/27/2006 10/28/2006 10/29/2006 0.18 10/30/2006 0.20 10/31/2006 11/01/2006 11/02/2006 11/03/2006 (0.18) 11/04/2006 (0.15)
View Replies!
View Related
Find First Blank Cell In Column & Return Adjacent Date Less Than Or Equal To Today
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values. I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008. CREATE TABLES LIKE BELOW?Column A Column B Column C March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
View Replies!
View Related
Return MAXIMUM Based On Criteria
i have a spreadsheet like the following A B C Country Revenue Month 1 UK 10 Jan 2 France 20 Jan 3 US 30 Jan 4 UK 25 Feb 5 US 35 Feb 6 France 5 Jan and so on... So where country = UK, France or US I want to retrieve the MAX revenue from all months and which month it was in. Eg UK max revenue was in Feb of 25. I am not sure how to apply the max formula with criteria. Is there any way to do this?
View Replies!
View Related
MAXIMUM Function Limit: Return A Value?
What I'm trying to do is get the MAX function to return a value, but that value needs to come before the values reach zero. It's a cubic equation that basically starts, at the beginning of the data range, under 10 then hits zero and ends up near 30 at the end of the data range. The end data range max doesn't matter to me if the data range hits zero along the way. Is there any way to make the MAX function stop at a certain value, or is there another function that could accomplish what I'm trying to do?
View Replies!
View Related
Return Heading Of Column With Maximum Value
In attached example, I have 3 columns of fractions with a final row of sumtotals (taken from elsewhere). I test to see which column has the maximum value in each row and allocate the result with the column's heading. Sometimes, two or more columns have the same max value. In this scenario, I wish to select the column heading that has the largest sumtotal.
View Replies!
View Related
Return Cell Address With Maximum Value
I have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4) It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
View Replies!
View Related
Return Data Corresponding To Minimum & Maximum
Please see attached file which is data for horse races (this is a small example of the data i will be working with). I need to find the largest values from the MIN and MAX column (shaded Grey) range for each race. I want to be able to add a function that will allow me to quickly identify which horse has the largest number in both the MIN & MAX columns example on spreadsheet is highlighted RED. It would be handy if it would inform me if the criteria has been met by highlighting it or by placing some text value in an adjacent cell on my spreadsheet i have used the example "Y". It would also be beneficial if that race be deleted in its entirity if there are no horses which meet the criteria above or similary if all other selections within that race be deleted if ther is a horse which meets the criteria. If there is a selection within that race i will need to keep the row that includes the heading which is coloured blue on the attachment. I will be working with 20,000 or more selections at a time so it is important that they can be identified quickly for ease of use. I have tried the functions i know such as MAX and LARGE but this requires me to do alot of work when you consider the ammount of data i'm required to work with.
View Replies!
View Related
Lookup Maximum Value & Return Corresponding Row
i have a matrix index| a| b| c| 0001 |1| 2| 2.22| ( probably it will be much clear to see the attachment) I need to lookup for the largest number in B2:D2 (in this case 2.22) and return the corresponding header ("C"). I though it would be simple with hlookup() and max() but i can't make it work.
View Replies!
View Related
VBA Macro To Return Maximum Value In Text Form..
I am a novice to VBA in excel, i have a table of more then 5000 rows. I would like to find a maximum value from each row and return the column title as "GL_Weld" or "Bend" or "Header" into another worksheet cell. i.e First Row max value = 0.011510 should return "Bend" into another worksheet GL_WeldBendHeader 0.0001700.0115100.000500 0.0000000.0007800.000000 0.0002400.0110700.000480 0.0000000.0006600.000000 0.0000000.0037700.000000 0.0000000.0000100.000000 0.0002800.0108700.000480 0.0000000.0007100.000000 0.0002000.0112900.000490 0.0000000.0008400.000000 000.00002 00.000310.00001 000.00004 00.00030.00002 000.00001 00.000270.00003 000.00002 00.000260.00004
View Replies!
View Related
Lookup Maximum & Minimum. Return Corresponding Row
I have searched your forums and thought I had found a sufficient answer but could not get the vba to work. So any help is greatly appreciated. I am trying to determine a max value from a list then put that value in a cell. Next I want to determine how many times and on what day that max value occured. From there take the value and concatenate them adding a "," between them I have attached an example. I would like the values placed in cells F1 and H1 (the other is a min value and when it occurred)
View Replies!
View Related
Return Values In Range Based Upon Relationship To Maximum Value
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance. The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
View Replies!
View Related
Return Only Unique Text From Another Sheet Along With Correlating Minimum And Maximum
I have, on one sheet, a list of incumbent employees that includes the following columns: Job Title [text] and Salary [number]. I am trying to automatically populate a second sheet with columns designating: A list of each unique job title (no duplicates), the maximum salary corresponding to each unique job title, and the minimum salary corresponding to each unique job title. Lastly, I'm an attorney dealing with confidential client data, so I'll have to go through a lot of trouble to post an example... but I'll do it if necessary.
View Replies!
View Related
Filter By Each Maximum Date
I have an Excel- sheet with 2 columns (Salesman and Date) Salesman Date A 2004-01-01 A 2006-01-01 A 2007-01-01 B 2003-01-01 C 1999-01-01 C 2002-01-01 D 2005-01-01 D 2007-01-01 I would like to filter the sheet so that every salesman is listed only once with his/hers latest date - The result of the example above should be: Salesman Date A 2007-01-01 B 2003-01-01 C 2002-01-01 D 2007-01-01
View Replies!
View Related
Maximum Date In Array Macro Code
I'm writing a macro that will pull a set of dates from a worksheet and put them into an array. Then I want to find the max date in the array (most likely using some sort of sorting method). The code below is how I'm putting the dates into an array. I'm not sure if using the date data type is best. I can't tell how it will sort the information. Is there an easy way to find the maximum of an array of dates? Dim Date_Array() As Date If Sheets("Sheet1"). Range("N" & i) = "Date" Then j = j + 1 Redim Preserve Date_Array(j)
View Replies!
View Related
Maximum And Minimum Formulas Based On Date Range
I have a spreadsheet with two columns - column A contains dates and column B has the corresponding data (always numbers). The data is not uniform (i.e there may be lots of entries in any given day and none over the next few). The data is always sorted in chronological order. I want to set up a summary table to show the min, mean, median, max for each week. I have set up an array to calculate the mean, but I am having trouble working out a good way of gettting the others short of having a set of columns that manually define each cell...for instance =min(b3:b27) or =min(b28:b30).
View Replies!
View Related
Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View Replies!
View Related
Return Maximum Of Active Cell & Arbitrary Value To Cell
I am looking for VBA that will add the value of the current active cell on the sheet to the value in cell F12. The maximum value of F12 cannot exceed 1000. So if the value in F12 = 950 and 100 is the value in the active cell the maximum value in F12 should show 1000, not 1050. It should do this on the click of a button.
View Replies!
View Related
Return Blank Or Zero
Clolumn D will always have a positive value, Column N sometimes will be zero. using the formula =SUM(N6-D6) returns a negative value if 'N' is zero. I would like to return a blank cell or '0' if 'N' is zero.
View Replies!
View Related
Compare Dates To Date Range & Return Date Based On Outcome
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9. To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
View Replies!
View Related
Return A Blank Cell
I am using Excel 2000 I am using the "IF" formula to pull in data into a forms section. I then save the forms section as a CSV file. When the IF statement returns the "false" value, it is looking to pull over a "blank" cell. When that happems, a "0" pulls over. I tried to put a "" in the blank cell, but while the output of the formulaa looks "Blank" when I convert the tab to CSV, the output is a quote mark ". I need the formula to display a real BLANK cell or something that acts like a blank cell
View Replies!
View Related
Return Blank Instead Of $0.00 In Sumifs
Shortened for example; I have created a drop down list with gas, groceries and travel as the categories. column a is labeled expenses and formatted as currency. column b is labeled category with the drop down list in each cell. column d contains each item, gas, groceries and travel on separate rows. column e will contain the total for each item in column d using "sumifs formula". If there are no travel expenses, instead of returning $0.00 I want the cell to be blank. I know how to do this in a simple sum function but sumifs are sumthin else. I have tried using <> for not equal to and everything else I can think of and I usually get a VALUE error. how do I get it to be blank instead of $0.00???
View Replies!
View Related
Return 2nd Non-blank Value In A List (with Example)
I finished mty project which shows how to return the value of the first non-blank cell in an array. That's great, but I now need to find the next value, and so on. In the example, I'd need to get "BBB" to come out of the formula. My list has other blanks inserted throughout the array, so it would more closely resemble: A1 AAA BBB CCC Any ideas?
View Replies!
View Related
Vlookup To Return Blank Cell Instead Of #N/A
is there anyway to have a vlookup formula display a blank cell instead of #N/A if the value it was looking for is not found. For example the first spreadsheet contains the persons name say Bob, the 2nd spreadsheet that the vlookup formula is searching does not contain the name Bob right now excel shows #N/A but what I want it to show is a blank cell. I've tried conditional formating to just white out the text if #N/A appears but can't seem to get that to work.
View Replies!
View Related
To Return A Blank Cell In A Formula
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart. My problem is that that excel dont recognise the "" as a blank cell in my chart. Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
View Replies!
View Related
Check For Return Of 0, Then Display Blank
I have a vlookup formula I would like to add another If statement to. =IF(ISNA(VLOOKUP($O2,Table!$A$2:$I$72,9,0))=TRUE,"Not In Table",VLOOKUP($O2,Table!$A$2:$I$72,9,0)) This works fine, but if the field that it is returning (9 in the case above) is blank, I get a zero in the destination cell. Can I add another check in this formula to see if the destination cell is zero, but display a blank?
View Replies!
View Related
Lookup To Return Blank If Data Not Available
I want to lookup the tags in sheet1 on sheet2 and see if they have a date in columnB. whatever date is in columnB sheet2 i want that same date to show up on sheet1. but if the there is no date i want the cell to remain blank. do i make any sense at all? look at my example. example2.xls
View Replies!
View Related
Return First Non-blank Cell In Row
I'm trying to do several things. I have 6 columns (A:F) with column headers and 12 rows of data and not every cell has a number as its content. Some cells are blank. I have attached my file. Using Row 2 as my example: 1.) I want to return the contents of the FIRST non-blank cell in the range (A2:F2) in cell I2. 2.) If I2 is not blank, then I want to return the column header (text) which corresponds to the resulting number content of cell I2. 3.) I want to return the contents of NEXT non-blank cell in A2:F2 in cell K2. 4.) If K2 is not blank, then return the column header (text) which corresponds to the resulting number of K2. I will then repeat the 3rd & 4th scenarios in columns L thru S. What I’m trying to do is place all non-blank data up in the first-foremost columns (H thru S) as I possibly can so I can use the data from these new columns (H thru S) as my merge fields in a Word document.
View Replies!
View Related
How To Return Blank Result If No Match For VLOOKUP
I'm using this formula (thanks to dafan & HalfAce [url] =IF(VLOOKUP($A177,$A$736:$C$787,3,FALSE)=0,"",VLOOKUP($A177,$A$736:$I$787,3,FALSE)) to return the value located in the 3rd column of the range when the value in the 1st column of the range matches the data in A177. However, there isn't a match for the data in A178 in the range, so the formula returns "#N/A". I would like the cell containing the formula to remain blank in those instances.
View Replies!
View Related
Return A Complete Total If Criteria Is Blank
I am trying to combine a If(is(numbersearch combination with a Frequency formula , i am not using sumproduct as want to return a complete total if criteria is blank. When a certain validation is entered it returns the number of individual number combinations in a column ignoring duplicates (columns are number only not text)
View Replies!
View Related
|
TRACKER
