Return Result Of WorksheetFunction To Cell
Sep 14, 2007
I am editing macro formula... is it possible VB does calculation during code execution & return only the value to Cell. this way the formula calculation remain hidden & code will probably run faster..eg.
Range("D3").Select
ActiveCell.FormulaR1C1 = "= COUNTA(Data!C[-3])-1"
Range("D3").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
I need to calculate & keep only value not formula in excel sheet each time the macro runs. I am getting error
Worksheets("data").Range("D3").Value = Application.CountA(Data![C:C]) - 1
View 3 Replies
ADVERTISEMENT
Jul 2, 2009
I want to return a result IF a certain value is found in another cell. I've attached a sample workbook, but here's a description:
On the "Inventory" worksheet, in column H, I want to lookup the quantity in column B from the "Warehouse Response" worksheet. If the Part # in column E of the response sheet is NI1088106, I want THAT value to show under the NI1088106 part number, and I want the quantities for the NI1089106 to show under that part number. Ideally, the result of the formula would show a "0" if no data is found.
Here's the formula I tried beside the NI1088106 data, but it's not giving the desired results: =IF('Warehouse Response'!E:E="NI1088106", VLOOKUP(LEFT(A3,3),data,2,0))
View 3 Replies
View Related
May 30, 2006
After using a vlookup to find a value in a cell I want it to return the cell belows information.
View 2 Replies
View Related
Oct 2, 2007
I have a table of repair jobs done over a period of time. I just need to determine during which shift was the repair job done. The time during which the job was initiated is called Notification Time.
If the job was done at, say, 0100 hrs, then it was done during Shift 1 (0000hrs to 0800 hrs)
If done at 0830 hrs, Shift 2 (0801 to 1600hrs)
If done at 2030 hrs, Shift 3 (1601 to 2359 hrs)
I need a formula to allow me to determine the Shift no. by just checking against the Notification Time column.
View 9 Replies
View Related
Oct 26, 2007
I have a spreadsheet where in cell E2 there is a drop down box with the following options to select: Warranty Replacement, Insurance Claim, Billing Issues, Retention Opportunities.
In cell F2 is where wait time minutes are generated depending on what is selected from the drop down box in E2. I am trying to create a nested IF formula for the following scenario:
Warranty Replacement = 20
Insurance Claim = 20
Billing Issues = 15
Retention Opportunities = 20
View 5 Replies
View Related
Sep 27, 2006
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
View 9 Replies
View Related
May 21, 2008
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
View 2 Replies
View Related
Jan 30, 2014
I deal with a rather large excel database (the range is A1:AV168266) that contains customer information. Some of these various customers are affiliated with a group called "ascend" and I need to be able to filter all my list by every customer affilliated with Ascend. The trouble is that the word "ascend" can appear in 8 different columns and usually when it appears in one column it doesn't appear in the others and their can also be more text in the cell beyond the word "ascend". I want to create a formula that will simply look for the word "ascend" in any cell of a row and return a result I can filter by. I will be putting the formula in column AW and put it in all 170,000 rows of that column, that way I can just filter by a single column.
I've played around with combining COUNTIF with SEARCH and MATCH with SEARCH but nothing seems to work.
View 7 Replies
View Related
Jun 10, 2014
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
View 3 Replies
View Related
Dec 9, 2013
Been working on this problem for a while, I need to have a vlookup (or other function) return locations based off of a concatenate (for unique identifiers). Only issue is that the concatenate formula creates doubles which returns the same location for each vlookup. I have attached an example file.
View 2 Replies
View Related
Oct 14, 2008
creating a formula that will give me a result of either "W" or "L" depending on the amount in corresponding cell.
View 9 Replies
View Related
Dec 16, 2009
I need to figure out a formula that will look across a row and once it finds the criteria specified, it will return a value going down the corresponding column. I have attached a file showing the example.
View 3 Replies
View Related
Aug 5, 2008
I have this formula in C7:
=VLOOKUP(A7,A$20:C$76,3)
The Table Array contains a list of 12 months, and there will be a match to the Lookup Value in A7 each month. I would like C7 to reflect the last completed match in the list (it will be updated each month). So, when June is the last completed month, C7 will return the matching amount from the Table Array for June; then when July is completed, I would like C7 to reflect the matching amount for July.
View 9 Replies
View Related
Dec 6, 2006
I have tried searching for this topic and have been unsuccessful. Perhaps my search was too broad. Either way, I am trying to understand how to search/query a specific data entry among several sheets, and then return corresponding values from adjacent cells.
View 3 Replies
View Related
Dec 30, 2006
I created a drop down menu from a named data range on a seperate spreadsheet in the same workbook. Based on the selection from that drop down menu I want a preassigned number to pull into another cell. I'm not thinking of the correct formula or something, because it's not working. Could it be because it's text? My spreadsheet with the data is as follows:
Bridger to American Fork 051725
Hunter to American Fork 051725
Hunter to Delta 051715
Hunter to Hiawatha 051728
Navajo to Am. Fork w/ front 051725
Navajo to Am. Fork w/o front 051725
The 1st column is the origination/destination and I named that range "freight hauls". Which is what the dropdown menu on another sheet (AP Reconcilliation) consists of. From that, I want the 2nd column number to pull into another cell on the AP Recon sheet. The formula I wrote that isn't working is: =index('AP Reconciliation'!A2:B8,match(A6,'Freight Hauls List'!B2:B7,0),2)
View 3 Replies
View Related
Jan 17, 2014
I have in the attached file four variables, with their values in B3:B6, and the results of applying a formula to them in B8.
How to determine which value variable C must be changed to so that the formula returns the result in B10?
Solution.xlsx‎
View 4 Replies
View Related
Nov 10, 2011
What I want to do is, given the data in col. a, I want to supply a number(range) of strings which can be found in column a, whenever a string is found, which exists in given range, I want to write the string from the Key(col. c) in col b instead of the value from the string that matches a value.
See below for example of what I got working but not exactly what I was looking for
Col. A- Data
Orangegreen
Blackwhite
Blueyellow
Col. B - Result
Col. C - Keys
Orange
White
Yellow
I used
Code:
=INDEX(A1:A3,MATCH("*"&C1&"*",A1:A3,0))
This does produce a result, but not entirely what I am after.
This requires only one string to search for, and will in cell B1 result in a value of 'Orangegreen' as I can only supply one valeu to the function. What I want to do is supply the function with a range of values, and have those values outputtet in colb instead af the value of cells where the result is found.
I tried modifying the function to include a range, but that does not produce a valid result.
View 5 Replies
View Related
Mar 3, 2007
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
View 9 Replies
View Related
Aug 17, 2007
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies
View Related
Nov 29, 2007
I've created a Database using excel which feeds data to a pivot table I created based on it. My objective is to create a new item in this pivot table (Pivot Table > Formulas > Calculated Item) which calculates the average data for the past 6 months.
The formula I used in order to get a result is this:
=IF(((May+June+July+August+September+October)/6)=0;;(May+June+July+August+September+October)/6)
and the problem is that the answer is 0 when there is no data for all 6 months (for example, there is a customer who hasn't baught anything during the past 6 months), the pivot table displays 0, instead of not showing this customer at all. My goal is for the IF function not to return any data if the result is 0, so that the pivot table doesn't show items with no data.
I also tried:
=IF(((May+June+July+August+September+October)/6)=0;"";(May+June+July+August+September+October)/6)
and also using ;" ";
but these formulas return #VALUE! in the pivot table, given that the Data is "SUM OF Sales" and "" is not a number.
How can I get the formula not to show anything at all?
In addition to this, I was wondering if it is possible to make this formula more automated, so that it calculates the average of the past 6 months, taking into account some type of reference month (rather than having to edit the formula each time a new month is analyzed).
View 9 Replies
View Related
Sep 21, 2009
Col ACol BCol CCol DCol ECol F
row 1811TAX CONSIDERATIONS1TAX CONSIDERATIONS
row 1911TAX CONSIDERATIONS#N/A
row 2011TAX CONSIDERATIONS#N/A
row 2121FLYING FALCON1TAX CONSIDERATIONS
row 2221FLYING FALCON#N/A
row 2321FLYING FALCON#N/A
row 2431IN COMMAND1TAX CONSIDERATIONS
row 2531IN COMMAND#N/A
row 2631IN COMMAND#N/A
I have 5 coulmns of data and in col F I have the following formula in row 18
=VLOOKUP(E18,$C$18:$D$800,2,FALSE)
the results come back " TAX CONSIDERATIONS"
however the same results comes back in row 21 and row 24......how can I modify this lookup to change when column B changes
View 9 Replies
View Related
Sep 16, 2009
I have a production planning spreadsheet that is updated every week from a database to a new sheet. This sheet is 'Sheet1', last weeks update becomes 'Sheet2'. Every day people annotate and colour cells for various orders, depending on their place within the planning scheme. It's really only the formats that I need to copy across, I could use the VLOOKUP function for the values - So I suppose you could say I'm looking for a VLOOKUP macro/VBA Code which keeps the original formatting (cell colour etc.)
View 2 Replies
View Related
Oct 27, 2006
if Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
View 7 Replies
View Related
Nov 6, 2006
When i have a formula standing at A3 fore example =A1-A2
and when i fill in a number like 100 at A1
And i fill in a number like 150 at A2 then at A3 where i had make my formula in there stands -50
Now i want the -50 not to disapear but instead there must be stand a 0(zero)
What is the formula i can use
i dont mind to put in at another cel like A4 for example
View 9 Replies
View Related
Dec 15, 2006
I have a list of people with SSN, about 3000. This list contains business done by each individual, which can be in all 50 states. I have another list of the same individuals with just their name and addresses and what we call "client number". I need to put the client number with the list for the individual states. See example list:
List of individuals with client numbers
123 John Doe
456 Jane Doe
List of individuals with state business
John Doe AR
John Doe CO
John Doe FL
John Doe MS
John Doe TX
Jane Doe MS
Jane Doe TX
Jane Doe AZ
I need for those client numbers to appear in the column before the names on list with states.
Example:
123 John Doe AR
123 John Doe CO
123 John Doe FL
456 Jane Doe MS
456 Jane Doe TX
View 6 Replies
View Related
Dec 19, 2006
621
532
249
I have these numbers located in column A (rows 1:3)
formula that will return my search result (in these case 532) as well as the information immediately above & below the location of cell that has my search info?
View 9 Replies
View Related
May 7, 2007
I have two workbooks Raw File and Lookup_Test, I want to find the value of Column A from Raw File, in Column A of Lookup_Test, if the value if found then i want the value in Column D from Lookup_Test, to be copied to the Column B of Raw File .
Well its like using vlookup , however i am trying to avoid using Vlookup and find any other way of doing the same.
View 9 Replies
View Related
Aug 28, 2007
I am working on a spreadsheet for some packages we are sending to multiple recipients. I have figured out how to get all the weights calculated, now my Mailing Manager has asked me to come up with a calculation for the actual postage amount for all the 1400+ packages...Unfortunately it is not as easy as that would seem.
There are 9 different mailing zones and each zone has 19 weight categories and each category has a corresponding postage amount for the package. So I need to come up with a formula to calculate the package postage amount based on those multiple categories.
For example:
Zone 1:
0-1lb = $2.12
1.1-1.5lb = $2.12
1.6-2lb = $2.21
etc
How do I go about entering in that information from which a formula can determine the proper package postage cost and what formula do I need to use in conjunction.
This is all done within a address list so each package is a row and all weights and zones will be in a separate column.
Package is in zone X and weighs Y pounds therefore the postage is Z. Something like that.
View 9 Replies
View Related
Nov 28, 2007
I seem to be having a little trouble with some of my code. It has worked previously without error. The variables CMvN and SkMvN are DIMed globally. The only thing that I recall that I have changed is that I have changed them from Double to Long. Changed it back to test and still experiencing problem.
' Filter named range using a named range on another sheet
Range("FilterRange").AdvancedFilter Action:=xlFilterInPlace, CriteriaRange:=Range("NormalMetroAM"), Unique:=False
CMvN = WorksheetFunction. Subtotal(101, Range("Cancelled"))
SkMvN = WorksheetFunction.Subtotal(101, Range("Skipped"))
When I put a break point in above it then enter:
? WorksheetFunction.Subtotal(101, Range("Cancelled"))
in the immediate window, the correct value (e.g. 8.57142857142857E-02) is returned. However, when I step through the code and go for example from CMvN line to SkMvN, the value isn't assigned to CMvN.
View 4 Replies
View Related
Apr 21, 2008
i have a sheet which adds up stock = SUM(F6-D6) (told u it was basic) what i want to do is if a negative number is the answer i want the sheet to change it to zero.
View 3 Replies
View Related
