This function =INDIRECT(""&A17&"!"&$A$8) works only once or twice. Then I rewrite it as =INDIRECT(""&A17&"!"&A8), without the dollar sign, $, at A8. But then that only works once or twice.
This is how it works: In Grid A17, type name of worksheet in which to perform the data search. Then, the function goes to that worksheet and selects the data in Grid A8.
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
If I have a cell that has as its contents as sheet name, is there anyway I can use the cell's address to reference that sheet?
As an example, say I have in Sheet1, cell A1, the text Sheet2. And let's say I want to return the value of cell B2 on whichever sheet the text of A1 says. So, on Sheet1, I might have this:
I have a workbook that uses the following for a list of names (in a specific cell) over multiple sheets:
Burns, Charles; Simpson, Bart; Smithers, Waylon; Wiggum, Ralph
Some names appear on different sheets. I would like to create a TOC sheet that lists what sheet each name shows up on. I can pull the names and have a list of all of them, but how to
a.) determine all of the sheets where each name shows up and, subsequently,
b.) how to programmatically create a hyperlink to whatever sheet(s) each name shows up on.
I've attached a dummy workbook. The column in question is Content Owners. There would be a link to each separate sheet in different cells adjacent to the name.
CRSample.xls
I have a sheet that has a macro on it, I would like to run that macro programaticaly but Im not able to call it using Call mymacro type of code. The code that calls the macro resides in a module and the macro is in a sheet. Obviously they are not talking, is there a way to run it remotely without moving the macro into the module?
what is the function to return the SHEET name to a cell?
View 3 Replies View RelatedI have the following range of cells B2:Y3700. I want that when a value from 1 to 9999 is inserted in one cell of the above mentioned range, to copy the row number of that cell in the cell that is located in column Z and row is the number inserted in that cell. For example, if the number "1234" is inserted in one cell from range B2:Y3700, to enter in cell Z1234 the number of the row where is located the respective cell. At same the time is very important to me to not permit to insert the same number in B2:Y3700, so i believe that is need a macro code to check the cell from column z to see if value already exist .
View 5 Replies View RelatedI want to develop on the formula I have below to return the value in the same sheet as the formula from Cell AA2 if the result of the formula below returns #N/A
=IF(ISERROR(VLOOKUP(B2,Analyst!$J:$K,2,FALSE)), VLOOKUP(AP2,Analyst!$B:$C,2,0),VLOOKUP('IE STORES AGING 06-05-2014'!B2,Analyst!J:K,2,FALSE))
I have one column of about 10 names (each of which is unique). The cell adjacent to these names is empty and I want to insert a value into this cell.
The value I'd like to insert into this cell is located in another sheet attached to the same file. This sheet has the same layout, except the unique name has the value next to it and the order of the names is different.
I'd like the formula to determine where the name from the first sheet matches the name from the second sheet. I'd like it to then display the data associated with that unique name in the first sheet, adjacent to the name in the blank cell.
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
I have sheets with values only in cells A1, see example:
Sheet1: A1: Mother
Sheet2: A1: Father
Sheet3: A1: Son
Family: <empty>
I would like to fill Sheet "Family" that excel read all sheets and copy values from A1.
So, the final result on sheet "Familiy" will be new table (e.g.):
Column A Column B
Row1 Sheet1 Mother
Row2 Sheet2 Father
Row3 Sheet3 Son
Is it possible to create macro for such scenario.
In addition, i have more then 200 sheets named with values in different cels....
But if i solve this simle way, i think that this will be helpful for complex requirement
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
i am using this formula to look in a sheet for a cell then return that value from a different sheets column
View 3 Replies View RelatedI have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View RelatedHere's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
In Sheet2 I have a list of cell addresses showing values such as D5, D32, D59, D221, D869 stored in cells AB7:AB16. In Sheet1 the "D" column holds dates. I want to return the corresponding date for each D# cell into Sheet2 in column AC7:AC16. I'm unaware of the proper syntax for this. I though it would look something like:
='Sheet1'!('Sheet2'!(AB7))
however that doesn't work.
I need to select a worksheet from another workbook.
I want use a cell contains which contains a date that corresponds to the worksheet's name in the other workbook.
I want to auto populate a call with the value of a different cell that has been colored on a different page.
Example:
1.) On Sheet 1, Cells range A1-A10 have values to choose from
2.) I choose A7 and change the cell color to gray
3.) It auto populates Cell B1 on Sheet 2 with the value of the gray colored cell I selected on Sheet 1
How can this be done?
E.g. say I want to create a list of cells each referencing to the first, second, third sheet, and so on.
Say, on one sheet cell A1 references to the second sheet's A1, cell A2 references to the third sheet's A1, and so on.
Ideally I'd love to be able to write something like
=Worksheet(1)!A1
=Worksheet(2)!A1
=Worksheet(3)!A1
and so on.
The problem is:
I Sheet 1 cell I33 is updated weekly. It would then be great with a macro that could copy from I33 in Sheet 1, into C5 in Sheet 2. But if C5 is filled, it should paste into D5, and so on.
I have two Sheets, first is Service Data, the second is Log Sheet. In the Service Data sheet I have a column of serial numbers in column A. I also have a column of serial numbers in the Log Sheet, column A.
I'm looking for a conditional format whereas I enter numbers into column A on the Log sheet it will auto highlight the cell if I duplicate a serial number from row A in the Service Data sheet. I would like it to highlight the Duplicated number on the Log sheet. I know new versions of excel make it easier to do this but unfortunately I have Excel 2003.
Create a macro button in 'Spreadsheet 2' that searches 'Spreadsheet 1' for updated information specific to a certain criteria and adds it to a new row in 'Spreadsheet 2.'
There are three sheets
Prospects (where all original data is entered)
Actions -Bob (Bob's new Prospects are added to this sheet)
Actions -Frank (Frank's new Prospects are added to this sheet)
So in this example Row 6 in Prospects (Constituents, Rating, Manager and Solicitor would be added to ACTION - Bob's sheet on Row 5
and
Row 8 in Prospects (Constituents, its Rating, Manager and Solicitor would be added to ACTIONS - Frank sheet on Row 5
Here is the example spreadsheet - Prospects and Actions.xlsx
i have two sheets, one to display results (Reults tab) & the other tab containing the data (Data tab)
what i am trying to do is some how create a search function and have a forumula which contains a LIKE function that looks up the data table
RANGE = Data!A2:K255
the search needs to lookup the primary column Data!B2:B255 ... if any results are found .. show them on the results tab.. and if multiple results are found, display those as well.. (in either instance, the whole row of information in respect to the results need to be dislayed and hopefully no duplicates are found .. eg, Data!A:K of a hit)
is there a formula that can achieve this? oh, the search is TEXT based and there should be no empty cells within the dataset
after some MASSIVE googling, i have stumbled accross this
B1 = Search box (txt field)
A6 (which will be a hidden column) contains =MATCH($B$1,Data!A2:A255,0). this formula provides the first instance of the result and provides the row number
A7 contains =MATCH($B$1,OFFSET(Data!$A$1,A6+1,0,8-(A6+1),1),0)+A6.
this is supposed to look for the next row number which contains a match and provide that row number
and througout my other columns, i have
B6=OFFSET(Data!$A$1,A6,1)
B7=OFFSET(Data!$A$1,A6,2)
B8=OFFSET(Data!$A$1,A6,3)
and so on
2 things i cannot recitify..
1, the match has to be EXACT ... unfortunately i cannot use exact .. needs to be LIKE .. eg, i cant use the search word "boat" as the range of data has "boats"
2, it comes up with multile .. irrelevent results.
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
I was wondering if there was any way to do a cell format so that if I type in a word in sheet1 say "mike" on sheet2 the word "mike" cell would be highlighted? or if there is a formula you could use to do that.
View 14 Replies View Relatedi have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
View 14 Replies View RelatedI have copied a sheet, moved it to the end and renamed it with a date that is in cell "A1"
Now after that process is finished I need it to update the date in cell "A1" of the newly created sheet with the next day's date.
I am stuck however referring to the previous sheet to update the date value in "A1"