Copy Cells Where Range Address Resides In Cells Of Another Sheet
Apr 11, 2008
Tried to write a Macro to Range Cells in a sheet, setting the range values from a another cell. I have encounted a Run-Time error as select method of Range class failed. Below is the Macro.
Sub Macro1()
Dim r1 As Range, r2 As Range, myMultiAreaRange As Range
Worksheets("Pre").Activate
Set r1 = Range("J4")
Set r2 = Range("K4")
Set myMultiAreaRange = Union(r1, r2)
myMultiAreaRange.Select
Worksheets("Data").Select
Range(r1, r2).Select
Selection.Copy
Sheets("1").Select
Range("B5").Select
ActiveSheet.Paste
End Sub
Have the Ranges been set incorrectly
View 5 Replies
ADVERTISEMENT
Oct 16, 2006
Sub TestSearch()
Dim FoundCell As Range
Dim SearchString As Variant
'Specify Value to Search
SearchString = " Excel"
'Perform the Search and Return a Cell Value
Set FoundCell = Worksheets("Source").Range("A1:A10000").Find(" Excel", lookat:=xlPart)
If Not FoundCell Is Nothing Then
MsgBox "Found at " & FoundCell.Address
End If
End Sub
I'd like to take the code above, which returns a cell address which contains the text " Excel" and modify or add to it the capability to copy a range starting from the address returned and ending 102 cells further down in Column A on the Source sheet to A1 of the Sheet1 sheet. The crux of the problem seems to be converting the address to a row number then adding the value of the number of cells in the range to find the end row number then converting that back to an address??
View 5 Replies
View Related
Aug 24, 2007
I have a workbook with 18 sheets. on each sheet there is a column titled "quantity". I've created a 19th sheet to display all rows with a quantity of greater than zero. This is a prototype of a positive test for a value other than zero, and copy the data to the 19th sheet. Here is what I've written.
Sub Test1()
Sheets("SING PLY").Select
Dim row As Integer
row = 31
Dim column As Integer
column = 2
If Sheets("SING PLY"). Cells(row, column) <> 0 Then
Sheets("Buy Out").Range(Cells(31, 1), Cells(31, 6)).Value = Sheets("SING PLY").Range(Cells(31, 1), Cells(31, 6)).Value
End If
End Sub
The error is
Run-time error '1004":
Application-defined Or object-defined error
I'm using the Cells object because this is eventually going to run as a loop and I need a way to increment the values.
View 9 Replies
View Related
Aug 7, 2008
Hi. Does anyone know a formula to copy a selected range of cells on sheet one to a range on sheet three when a check box in checked. Ex. copy range a4:j4 on sheet one into a4:j4 on sheet three once the check box for on sheet one is checked?
View 9 Replies
View Related
Mar 22, 2012
I need to make a VBA Macro (Assigned to a button) that will copy the information under the "Cut Length Worksheet" and paste it into the appropriate columns in our "Bill Of Materials Template." Any way to copy the cells, across different rows, into the proper cells.
I have several different Macros and Workbooks made up now, but I am lost here.
I also need the Cut Lengths to add certain info to the cell when it is copied:
8 | 7-15/16 ---> 8'- | 7-15/16"
Here is a Link to the Excel page.
View 3 Replies
View Related
Sep 6, 2006
Sheet 1 has data entered into it, it is then printed out as a jobsheet, saved and the data cleared. There are certain fields on this sheet that are eventually manually replicated onto sheet 2. The row in which they must go on sheet 2 will always be the 'activerow' on that sheet from a previous operation. It would make life so much easier and save lots of time if I could incorporate copying cells C10,C12,K8,K12,M2,C27 and C29 from sheet 1 to respective cells H,I,J,M,N,R,S of the active row on sheet 2 before I carry out the clear data process.
View 6 Replies
View Related
May 28, 2013
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
View 9 Replies
View Related
Jun 9, 2009
I have a master sheet named "Summary" and a number of following identically formatted sheets with lots of different names. I intend to pick out information from cell F7 of each of the following sheets and make the information show on the summary page. On the summary sheet in column A is the name of all the following sheets (spelt correctly), and in columns B, C and D are the spaces for the information I need on the summary sheet.
I need to set up a formula across columns B, C and D that I can copy down, which picks out the name of the sheet from column A and the cell reference within that sheet. So far I have experimented with formulae similar to the below which all keep returning with #REF! I hasten to add that all the Sheets are named and spelt correctly: =INDIRECT("'"&$A1"'!",$F$7)
The F7 would be changed for other cells in columns C and D, and so when I copied this down through all the following sheets on the summary page it should give me hte right results...
View 5 Replies
View Related
Dec 22, 2006
I'm having a 'mental block' day. I have a Named Ranges in a spreadsheet (Office XP). The range is defined as =OFFSET( ' Stock List'!$K$1,0,0, COUNTA('Stock List'!$F:$F),4)
i.e. starts at K1, is 4 cols wide and as deep as there are occupied cells in col F. (as I understand it). I want to treat this as an array in VBA and use 'x' and 'y' as indexes into the array. I want to either get the value from a single cell, or set the value in a single cell, which contain a string. I know its not correct but I have the formulae as follows, and for the life of me I cant figure out what the correct formula is -duhh!!
Dim x As Integer, y As Integer, z As String
x=3 'dummy test code
y=2
Range("MakerExtractArea").Offset(x, y).Value = "dummy"
z= Range("MakerExtractArea").Offset(1, 0).Value
View 7 Replies
View Related
Aug 13, 2012
Using macro's on Excel 2010. What I'm trying to do is create a macro that will copy a range of cells from one sheet to another depending on a option being selected from a drop down box. I've tried to use formulas but without success.
sheet 1 contains a list of approx 20 people with rows containing sales figures per week.
Is it possible to have a macro that will copy the rows to sheet2 depending on the dropdown? The drop down has already been setup with people's names
E.g.
if sheet 1, cell a1 (with data validation setup) dropdown contains "mr smith", copy sheet2 row A1:A9 to sheet 1 cell a2
or
if sheet 1, cell a1 dropdown contains "mr cooper", copy sheet2 row B1:B9 to sheet1 cell a2
etc... for each name in the dropdown
The idea is so that i select a dropdown and it copies the sales figures that match the dropdown name, if i then select another dropdown, the corresponding figures are copied to the same place.
View 3 Replies
View Related
Sep 7, 2006
I have to convert a range reference in the form of
Range(Cells(1,1),Cells(2,2))
to a reference in the form of
"A1:B2"
View 5 Replies
View Related
May 17, 2013
I have a form in excel (very simple) that I need to put on the web - People can then fill out certiain bits of the information and the idea is that they then click on the button to email it back to me. Ie complete it there and then and email it straight away so that they don't need to save it etc.
I can't for the life of me work out how to do this! I've managed to get the macro to open an email with the correct details on but not paste in the information so am at a complete loss and appear to be going round in circles!
View 2 Replies
View Related
Mar 29, 2014
Have you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies
View Related
Jan 19, 2012
I have data in some of the cells within range A26:A39
These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?
I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.
I anticipate that there will be 4 non blank cells within this range.
Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43
View 5 Replies
View Related
Apr 22, 2009
I have an excel workbook that I have created to use in the creation of purchase orders. I have a spot for the vendor in cell D10 and my items are in the range of B17 to N17.
What I would like to have is a macro that I can assign to a button that does the following.
I have a worksheet called "Purchase Order" that has all the information in it.
When you click on a button named "Process", it will take everything entered into B17 - N28 and copy it to a worksheet named "PO# History" starting in cell B2 and moving down. Each time I click on "Process" I need the information in the range above to get entered into the next empty line on the "PO# History" worksheet.
This way I can maintain a list of items purchased and then play with them in a pivot table/graph and such.
Also, What I need it to do also is when process is clicked, the macro needs to pull the vendor name from cell D10 and put it in column A on "PO# History" for each row it adds from B17-N28.
View 9 Replies
View Related
Dec 24, 2013
I want to do a loop where you can copy say A3 worksheet 1 then add another sheet naming the work sheet "A3" then copying A3 worksheet 1 to A1 "A3". After that looping to A4 to a new work sheet naming the work sheet "A4"copying the value to A1 "A4", etc...
Is there a simply way of doing this loop? I can probably fit my other coding into the structure.
View 4 Replies
View Related
Mar 26, 2008
I have a sheet that has a macro on it, I would like to run that macro programaticaly but Im not able to call it using Call mymacro type of code. The code that calls the macro resides in a module and the macro is in a sheet. Obviously they are not talking, is there a way to run it remotely without moving the macro into the module?
View 9 Replies
View Related
Apr 18, 2009
I want to be able to copy a name from one sheet (Available Players), paste it to a cell in another sheet (Round 1 through Round 20). The cell that will be copied is fixed but the place where it will be pasted will be different and may be on a different sheet.
also i would like to change the color of the copied cell to "greyed" out or cut if it can not be greyed out. I have created a button and put in a macro that i created but have been having problems with it, generic 1004 errors that i can not figure out. i am attaching the document.
View 8 Replies
View Related
Jan 15, 2009
I have attached a 97-2003 .xls file with data for multiple store locations on sheet 1, and the desired result on sheet 2. I am actually using excel 2007, but I dont think I need any special features that it provides.
I will try to explain the issue here without opening the attachment.
Here is an example of the Data on Sheet1
View 13 Replies
View Related
Aug 21, 2014
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
View 6 Replies
View Related
Feb 18, 2014
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
View 1 Replies
View Related
Feb 20, 2014
I'm trying to copy the cells from a sheet and transfer only the values to other sheet.
I did it via code and it worked fine, except for the dates. In the new sheet the months and days are swapped.
The original date is composed via the concatenate function, since it gets inputs (day, month and year) from the user in different cells. It's in the format D/M/YYYY (examples: 4/2/2014, 10/12/2013). I believe the excel interprets it as Text, even if I formated the cells to Date.
I think it may have something to do with the default format in different countries. Here in Brazil we use DD/MM/YYYY, but my Excel is in english and in US the format is MM/DD/YYYY, am I right?
View 2 Replies
View Related
Jul 15, 2013
The senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.
View 6 Replies
View Related
Aug 6, 2013
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
View 9 Replies
View Related
Aug 12, 2009
I have two sheets. Sheet A has a list of folders. This list is updates dynamically every time the sheet is opened. I have another sheet (sheet B) which has a list of all the files in the sub-folders, listed with the folder name at the top of the column and the files within in the column underneath with hyperlinks to them. The goal is to be able to navigate to the folders on sheet A and to click there to go to the column where all the files in that folder are linked to. What I need is a macro that will search a column and for every cell that has text in it and create in the column directly to the right a hyperlink to the appropriate cell in the top row in sheet B that has the same name as the text in the cell on sheet A that it finds. I already have the macros for listing the folders on sheet A and the macro for listing all the files in the sub folders in sheet B and they work fine. The goal is a link list which is dynamic and that recreates itself no matter what I add to the folders.
For instance, let’s say there is a folder timesheets. If I add a sub-folder called
accounting to the folder Sheet A scans then timesheets would be bumped down one spot on the list, so the macro has to look dynamically for the text in the column on sheet A.
Also the addition of the new folder would move the order of the columns on sheet B, since both lists are alphabetical. So the link generation macro would need to search row 1 of Sheet B to find the match for the text in the cell to the left of where the link would be generated and create a link to the top of that column. I’ve looked all through the site and not found something that I can even modify to do what I need.
View 9 Replies
View Related
Mar 12, 2014
I have one worksheet in my job named "Tudo" and there I have about 100 rules and the name of employees that need to follow these rules. What I need is the worksheet named "Nomes com Regras" show me in each name which rules is for each person.
View 2 Replies
View Related
Dec 16, 2009
first one is: "ws1" containing of col.A(140 000 cells) and col. F
second one is: "ws2" containing of col. A(109 000 cells) and col. B
I want to copy content of col. B from ws2 to col. F ws1, if col.A ws1 exists as part of string in col.A ws2. If there are more than one matches then only the first 10 results should be copied and sperated by ";;" in col.F ws1. After one search is finished then the search should be continued from last position and not from start. There should be no duplicates in col.F.
for example:
ws1 before:
col.A(contain of words and compunds)
back
backer
backwards
ws2
col.A(very long text)...............col.B(long text)
dkd backen...............................m1
fdlkbackisl.................................m2
asdbacker adsl...........................m3
backwards slsbacker...................m3
backerlsl sls so...........................m4
ws1 after:
col.A...................................col.F
back...................................m1;m2;m3;m4
backer................................m3;m4
backwards...........................m3
View 7 Replies
View Related
Feb 1, 2012
I am trying to make a simple invoicing sheet that once populated by clicking a button and running a macro, will pick data from various cells, copy and then paste to another sheet in the workbook.
I have for the most part done this, however I need the macro when pasting the data to the other sheet, to be able to paste it in the next blank row.
This is the current code:
VB:
Range("H19").Select
Selection.Copy
Sheets("Sheet4").Select
[Code]....
Its quite lengthy as its referencing one off random cells around the first sheet.
how to paste to the next blank row?
View 7 Replies
View Related
Apr 2, 2009
I have a commandbutton and I am trying to workout the code to go into its onclick event.
I have an input worksheet (inputsheet) where i enter information into cells A1:A5
I would like to click the button and have this info then transferred into the record sheet (called: recordsheet) in columns A to E.
Each time I press the button I would like the info in inputsheet A1:A5 to be transferred to a new row in recordsheet.
View 5 Replies
View Related
Aug 25, 2009
I am trying to create a a command button using the control tool box that will take info from specif cells from sheet1, and paste them into sheet2 in specif cells, but the most important part is that it has skip to the next row after each paste.
for example take A1, B1,C1 from sheet 1 paste it to B1, C1, D1 on sheet2, then take A1,B1, C1 from sheet1 paste it to B2,C2,D2 on sheet2
View 5 Replies
View Related
