Basic Cell Referencing - Return Correct Names And Values On Another Sheet?
May 13, 2013
Here's the data table being referenced
Rank
Week Ending
Name
Value
1
1/1
Apple
100
[Code] ........
Now on another sheet, I want to return the top two 'Name's and their values like below:
Name
Value
There is a fluctuating amount of rows in the first table, too. So what formula can I use to return the correct names and values on another sheet?
I'm thinking it will use some form of concatenate for the first and use a sumifs function for the value column..
View 1 Replies
ADVERTISEMENT
Jul 18, 2006
I have a set of worksheets (Sheet31 through Sheet49 by codename) produced by a machine in the lab. I want to create a summary sheet that references cells in those worksheets.
Rather than go through the annoyance of doing this manually 40+ times I'm working on creating a macro to populate the summary sheet for me.
This is what I have so far
For J = 31 To 49
ResultSht = SheetJ.Name
Sheet1.Activate
ActiveSheet.Range("A4").End(xlDown).Offset(1, 0).Select
It hangs up on the "SheetJ.Name" however. My objective is to be using the object SheetJ, where the object SheetJ is the codename of the results sheet I'm trying to reference (for example, in the first pass through the loop it would be Sheet31). Could someone point out my mistake in this object reference?
View 9 Replies
View Related
Feb 23, 2014
I am writing a macro to consolidate data from different worksheets in more than one Summary Sheets.
My workbook has quite a number of worksheets, from different department e.g. OPS001, OPS002,OPS003, ADMIN001, ADMIN002, ADMIN003 and so on.
I want data from OPS001, OPS002 and OPS003 to go on one sheet e.g. "Summary-OPS" and data from ADMIN001, ADMIN002 and ADMIN003 to go on the other sheet name "Summary-Admin"
When I am working on Summary-Ops sheet I want to copy data from sheets starting with name "OPS" and so on.
View 3 Replies
View Related
Jun 3, 2014
I am trying to put together a basic sheet with what I think is basic math, however, the multiplication does not seem to be working properly.
Field 1 is land value, field 2 is total acres. The math I have in field 3 is to give me a value per acre. Here is that formula: =Sum(B3/C3)
I have set the field to a number field with two decimal places.
Field 4 is Total Dry Acres field 4 is calculated to give total value for dry acres (here is where I am having problems) Here is the formula: =Sum(D3*E3)
Here are the numbers: Field 1 = 218702 Field 2: 1536.51 Field 3 (calculated): 142.34 Field 4: 1171.75 Field 5: 166791.54
It all looks good on the spreadsheet, however the field 5 number is not correct.
Break it out on a calculator: 218702 / 1536.51 = 142.34 (rounded)
Now 142.34 * 1171.81 = 166795.44
so working on the calculator, there is a difference of 3.69 between the two.
View 5 Replies
View Related
Mar 29, 2007
I am trying to allow for a cell selection to initiate a macro that would take the top cell in the current column and most left cell in the current row and placing those values into the names of the workbook and sheet that I want to move to.
I am tyring to allow for my users to drill down into data via selecting the cell in question that is referenced from another workbook and sheet. I want to place the value of the cell
= most left cell in current row - 1-1 to be placed in Active.sheet"1-1".select The work bood would pull the value from the most top cell in the current column and place that value in Activeworkbook.place here.select.
View 4 Replies
View Related
Mar 13, 2008
For example if I were to take the data in cells d3($358), d4($321), d5($130), d6($82) and skip a cell to now make the same data into cells d3, d5, d7, d9. Next, the data in cells f3, f4, f5, f6 would be merge into the blank cells of d4, d6, d8, d10.
The final result would look like column B. I have over two years of sales data in two separate columns that I need to merged into one column. Is there easier way without a simple cut and paste one cell at a time as this would take an enormous amount of time to complete? I’m not that good with VBA codes so a formula works good, but if VBA is the way to go then tell how to enter it on my worksheet.
View 2 Replies
View Related
Dec 4, 2008
I have this script (below, Krishnakumar orignally provided this script).
I'm trying to edit it to add cell values from cells C16 and E16 along with the worksheet name it displays in listbox2. So lets say worksheet "rollover" is the sheet being displayed in the listbox2.
I would like for it to look something like this:
rollover TT:'data from cell C16' TA:'data from cell E16'
Public FilePath As String
Public dic As Object
Public oWB As String
Public oWS As String
Public aWS As Worksheet
Private Sub CommandButton1_Click()
Dim i As Long, wb As Workbook, n As Long
With Me.ListBox2
For i = 0 To .ListCount - 1
If .Selected(i) = True Then
oWS = .list(i)
Set wb = Workbooks.Open(FilePath & oWB, UpdateLinks:=0)
wb.Sheets(oWS).Activate
Exit For
End If
Next
End With
End Sub
View 7 Replies
View Related
Feb 22, 2008
I have a spreadsheet containing a list of key fob numbers, key numbers, etc. I have 3 userforms with different for different options, i.e. Key fob no. search, key number search, room number search. I have set up the code for each of the userforms to search for the information entered in the textbox and then lists the info in the listbox which I can then click on the one of the listed items to take me directly to the place in the spreadsheet.
However since there are a range of different key numbers per key fob, I would like to know what code I can use to allow a range of information such as the key number and room number, etc to be displayed in the same listbox as the Key fob number i searched for.
Here is my code for one of the Userforms:
Option Explicit
Sub Locate(Name As String, Data As Range)
Dim rngFind As Range
Dim strFirstFind As String
With Sheet1.UsedRange
Set rngFind = .Find(Name, LookIn:=xlValues, lookat:=xlPart)
If Not rngFind Is Nothing Then
strFirstFind = rngFind.Address
Do
I cannot attach a example of my form since the site seems to have a limit on the size of the upload and my part of the file compressed in zip format is still at 168kb.
View 5 Replies
View Related
Sep 24, 2013
I am in a middle of creating macro that makes some calculations in a file downloaded from SAP.
This Macro is in a form of a userform with 8 optionBoxes more then10 Option Buttons then after clicking on a specific button a certain action is being performed it looks like this:
Capture.JPG - PicShot.pl
The code is in one file and I would like the macro operations to be performed on data that are in separate file.
Both are open while perforing macro action, and sometimes I'm getting a stop because macro is being performed in a file with code.
Referencing it with something like:
Windows(FN).activate where FN is defined as the name of a file that is being prepared by "Prepare Template" button.
View 5 Replies
View Related
Jan 7, 2010
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
View 2 Replies
View Related
Dec 19, 2012
I have a workbook with a menu and 122 sheets holding detail for unique item (product model).
On the menu there is an index of the sheet names which was hand typed. However, the sheet names change as models evolve/get replaced.
I've written a small macro to put the sheet name in cell J1 of each sheet.
[Code] ......
On my menu page i was hoping to do something like this:
A B
Index NAME
2 =sheet[A2].$J$1
3 =sheet[A3].$J$1
That way i could just drag this down and my index list would complete itself and would dynamically update as sheet names change....
View 5 Replies
View Related
Jun 3, 2014
I have a list of Grades (Job Description). Each of them is allocated a SCH No = SCH1 / SCH2 etc
I need a macro that will go through this list and copy the Grade into the correct SCH Column on Sheet List2.
The columns in List 2 then need to be sorted A-Z.
AddNamestolist.xlsx
View 5 Replies
View Related
Oct 19, 2009
I need the names of students from Summative tab in the correct box based on how many question they got correct. (Q 27-32, (0-1, below, 2-3, Average, 4-5, Above Average, 6, Excellent Performance. )
I have attached a file.
View 8 Replies
View Related
May 22, 2009
I have two worksheets in one document. On sheet 'M_Admission' there are numbers for each week. can those numbers be automatically copied to the correct cell on sheet 2 'M_Actual' See the attached Excel worksheet to see what I mean. (Excel 2002)
View 3 Replies
View Related
May 17, 2014
Trying to assign this cell's value to the correct sheet tab for the current month.
Trying this:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0),IF(MONTH(A3)=6,'[Wholesales 2014.xlsx]Jun'!$P$1,0)
A3 is todays date. Wholesales 2014.xlsx]May is a seprate sheet for the month of may and so forth for june.
The problem is the p1 value is empty for the Jun sheet so I get an error: #VALUE! (I assume that is why I am getting the error?)
Using:
Code:
=IF(MONTH(A3)=5,'[Wholesales 2014.xlsx]May'!$P$1,0)
By itself works just fine. I need to set this up for future use, though.
View 3 Replies
View Related
Feb 24, 2013
I want value in Cell "B2" of "Sheet2" and "Sheet 3" to have the value as active cell in "column C" of "Sheet1".
View 8 Replies
View Related
Oct 23, 2008
I'd like for users to click in a cell in col A in a sheet named "Period7", have the cell value placed in cell C11 in a sheet named "Per7Report," and change the focus or active sheet to sheet Per7Report.
Can this be done simply by clicking in a cell, or must a command button be inserted into each cell (note - odd rows only) in col A in Period7.
on the code to do this?
Note that there is a formula in col A in sheet Period7
View 9 Replies
View Related
Oct 18, 2013
I am trying to reference a cell in a different sheet and am having a hard time getting the formula to return correctly. The IF statement is currently written like this,
IF(theotherworksheetcell="0",iftruethiscelltoequal"0",iffalseIwanttotypeasimpleformula)
Example:IF('BaseRent'J16="0","0",(D16*E16/12))
The current formula is returning $0 only, it should return a number in some cases.
View 2 Replies
View Related
May 25, 2007
I have created a userform in excel with a listbox that has the names of 4 different sheets located within that workbook. I would like for whenever a name of the sheet is highlighted in the listbox, that sheet is opened. I have played around with the listbox.value and if then statements and can't seem to get it to work.
View 2 Replies
View Related
Nov 4, 2013
I'm pulling data into some graphs from multiple sheets. The data I'm after is in the same place in each of the sheets, and the sheet name is varying only in that they refer to different dates, such as "01-11-13", 02-11-13 etc...
How would I go about dynamically picking up the sheet name. and referring to it?
For example if I have a column with all the different sheet names in it:
Col AA:
31-10-13
01-11-13
04-11-13
etc!
View 11 Replies
View Related
Aug 2, 2014
I have multiple sheets with the names Payrolldata_Companyname (the company name is different for each sheet)
On a sheet called EmailList i have a list of the company names. Part of my macro is giving the cell containing the company im working on a Named Range of CompanyName. For example i might have company in the list called ExcelForum, which is in Cell A12. Cell A12 has been named CompanyName.
I want my macro to select the Sheet called PayrollData_ExcelForum, by getting the ExcelForum part of the sheet name by referencing the Range CompanyName.
My current link of code for this is as follows
Worksheets("Payrolldata_" & (Sheets("EmailList").Range("CompanyName").Value)).Select
This does not work.
View 2 Replies
View Related
Aug 12, 2012
repTot = Application.WorksheetFunction.Sum(Worksheets("Revenue").Range(Cells(xx, 65), Cells(xx, 65 + moNum)))
I am trying to debug the above line of code (moNum is just a variable the tells me how many months to extend the range to the right inorder to get year to date sums).
I have gotten to the point that it will run error free if "Revenue" is the Active worksheet when I run the line, but if I am on any other sheet it throws an "Run=time '1004' Application-defined or object-defined error" error. And if I change the range from cell notation to Column-Row, the issue goes away as well.
View 3 Replies
View Related
Sep 14, 2006
I am working on a sheet called 2005, with "Jan" entered into cell C4. I want to reference cells on the sheet called Jan2005 using a function that points to C4 and adds "2005".
View 2 Replies
View Related
Feb 2, 2010
I am getting the error from the title of the thread when I try to change a worksheet name.
This worksheet name doesn't already exist in the workbook and I don't have any other files currently open.
I'm not entirely sure what is causing this, but I do need the sheet to be the name I am trying to change to.
View 9 Replies
View Related
Mar 24, 2014
I am working with a worksheet that has some cells merged e.g. A1 and A2 are merged together as 1 cell. I am using cell offset to reference values from the worksheet assign them to variables then populate another worksheet with their respective values. I noticed that cell.offset(row,column).value is not retrieving a value when merged cells are mixed with non-merged cells within a given row. Is there another method/function I can take advantage of here?
View 1 Replies
View Related
Apr 23, 2009
I have three different sheets, each with a column of names, titled "list1, list2, list3." I also have a fourth list of names on a sheet titled "masterlist." I am wondering if there is any way I could cross check the three lists against the master list to see if any names appear on the master list but do not appear on any of the three lists. Is there any way I can cross reference the master list with each of these lists?
View 2 Replies
View Related
Apr 8, 2008
I have to match table column name with the column name in the sheets and get the values from column 6 in sheet2 if "# of values" in sheet1 matches with "Counter" of sheets for the same column.
if ("Table Column Name sheet1"="Column Name sheet2" then
if("Counter sheet2"="# of Values sheet1" then
return "Total # of rows Sheet2" from same row.
I am using Excel 2003.
Sheet 1 ....
View 10 Replies
View Related
Aug 12, 2008
I need to be able to auto fill, on sheet two,cell references for every 26th entry. Below is an example of what I would like it to be able to do with the drag, auto fill.
View 8 Replies
View Related
Nov 18, 2012
I have a large dataset that I need to push into a dictionary, into that dictionary I also have to create other dictionaries and this can go on until I fill the entire dataset into the dictionary. The problem is that I do not know beforehand what the key names will be so I need to find a way to get the key names.
I have the following test code:
Code:
Dim player As New Dictionary
player.Add "val1", "hello123"
player.Add "val2", "piet123"
[Code]....
how to get reference the key in a nested dictionary not using the keyname?
View 2 Replies
View Related
Mar 21, 2013
I have workbook that has several sheets within the workbook that are set up identical. Each of the sheets in the workbook are for a specific company.
As of right now I have been adding a sheet to the workbook that is an overview for what is in each sheet (the individual companies). Currently I am doing the formatting of the heading and column names manually and I pull the data from each sheet with a VLookup. I have been trying to enhance my VBA skills with coding something that will fill in the appropriate cells from worksheet to worksheet.
What I am trying to do is to populate an overview sheet with cells C24, C25, and B36 being static on each row per sheet. Then each row will be populated with cells C(36, 59, 70, 81), D(36, 59, 70, 81), F(36, 59, 70, 81), G, and H(36, 59, 70, 81). The overview sheet will have the diagram below in a ru
I attached an example : example.xlsx
Sheet 1
C25
C24
B36
D36
C36
F36
G36
H36
I36
[Code] .....
View 1 Replies
View Related