I want to develop on the formula I have below to return the value in the same sheet as the formula from Cell AA2 if the result of the formula below returns #N/A
=IF(ISERROR(VLOOKUP(B2,Analyst!$J:$K,2,FALSE)), VLOOKUP(AP2,Analyst!$B:$C,2,0),VLOOKUP('IE STORES AGING 06-05-2014'!B2,Analyst!J:K,2,FALSE))
i am using this formula to look in a sheet for a cell then return that value from a different sheets column
View 3 Replies View RelatedI need a formula to add two (2) cells (one cell in sheet 1 and the second cell in sheet 2) and return a value of the two (2) cells in sheet 3. I would like the formula to return a zero (0) value instead of #VALUE! ERROR displayed in sheet 3 if a cell in sheet 1 has zero (0) value and the second cell in sheet 2 is blank. For example: sheet 1 D2 (0) + sheet 2 D2 (blank cell) = zero (0) instead of #VALUE! ERROR
In addition, if cells B11:B12 are blank in both sheet 1 and 2, I would like the formula to display blank in sheet 3 for cell C11:C15 instead of displaying #VALUE! ERROR.
Here is the formula I have: =IF(OR(ISBLANK(Sheet1!D2),ISBLANK(Sheet2!D2)),"",Sheet1!D2+Sheet2!D2)
Note: I have attached a sample data set for better conceptualization of the problem. Sample_Formula.xls
I have 2 workbooks in Excel 2010, each contain just 1 sheet. (see attached) I need to compare on sheet 1, cell D1 and column A:A (this column will be much longer), with the data in columns C:C & A:A on sheet 2, if a corresponding match is found, the data contained in column D on the same row on sheet 2 is written to the cell with the matching data in sheet 1.
My attempt is in cell D2 on sheet1.
Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?
View 6 Replies View RelatedIf I have a cell that has as its contents as sheet name, is there anyway I can use the cell's address to reference that sheet?
As an example, say I have in Sheet1, cell A1, the text Sheet2. And let's say I want to return the value of cell B2 on whichever sheet the text of A1 says. So, on Sheet1, I might have this:
I have the following formula in cell B1 to return the Sheet Name as the cell value ...
View 6 Replies View RelatedVersion: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
I have a workbook that uses the following for a list of names (in a specific cell) over multiple sheets:
Burns, Charles; Simpson, Bart; Smithers, Waylon; Wiggum, Ralph
Some names appear on different sheets. I would like to create a TOC sheet that lists what sheet each name shows up on. I can pull the names and have a list of all of them, but how to
a.) determine all of the sheets where each name shows up and, subsequently,
b.) how to programmatically create a hyperlink to whatever sheet(s) each name shows up on.
I've attached a dummy workbook. The column in question is Content Owners. There would be a link to each separate sheet in different cells adjacent to the name.
CRSample.xls
I have a formula that needs some tweaking. This formula is to reference the ACCT and find the “best” contact information and return the result to the Merge sheet. If the ACCT does not have a Parent then you reference the ACCT to the abc_Phonelist sheet. If the ACCT does have a Parent then use the Parent ACCT since it has a more desirable account number to reference against the abc_Phonelist. If the ACCT or the Parent ACCT uses Processors then the ACCT from the Processors sheet has the best reliable account number to reference against the abc_Phonelist.
In sum, there are three different possible “number tiers” that can be used. The first, the ACCT phone number. This means that the ACCT has neither a Parent nor a Processor. The second, the parent ACCT phone number. This means that the ACCT has a Parent, but neither the Parent ACCT nor the ACCT has a Processor.The third, the Processor phone number. This means that either the ACCT or the Parent ACCT has a Processor phone number.....
This function =INDIRECT(""&A17&"!"&$A$8) works only once or twice. Then I rewrite it as =INDIRECT(""&A17&"!"&A8), without the dollar sign, $, at A8. But then that only works once or twice.
This is how it works: In Grid A17, type name of worksheet in which to perform the data search. Then, the function goes to that worksheet and selects the data in Grid A8.
what is the function to return the SHEET name to a cell?
View 3 Replies View RelatedI have one column of about 10 names (each of which is unique). The cell adjacent to these names is empty and I want to insert a value into this cell.
The value I'd like to insert into this cell is located in another sheet attached to the same file. This sheet has the same layout, except the unique name has the value next to it and the order of the names is different.
I'd like the formula to determine where the name from the first sheet matches the name from the second sheet. I'd like it to then display the data associated with that unique name in the first sheet, adjacent to the name in the blank cell.
I have two sheets - one work sheet and the second - database with existing entries. Going by visual example below, I need the column C of the work sheet to automatically populate with the data pulled from the database sheet. For example, C4 on the Work sheet should find both values "Bike" and "Green" in one row on Database sheet and return the corresponding value 44444 from F97. The work sheet cells in the row C should remain empty if no match found on the database sheet.
Sheet 1 (Work sheet)
-------A--------B---------C
1---Auto-----Red
2---Auto----Green
3---Bike-----Red
4---Bike----Green
5---Bike-----Blue
Sheet 2 (Database)
-------A--------B---------F
12---Auto---Red----11111
37---Auto--Green---22222
85---Bike----Red----33333
97---Bike---Green--44444
102--Bike---Blue----55555
I have a sheet with Customer name in the first column and next 7 columns have unique serial numbers(alphanumeric) of the systems which that customer has purchased. In another sheet, i have the unique serial number in first column and I want to search this number in the 7 columns of other sheet and return the "Customer name" to this sheet. How do I do that ?
Vlookup searches only in 1 columns, so does match index. lookup didn't work as well.
I need to lookup to search a range on a different sheet and return the appropriate corresponding cell.
Basically its if a1 is found in the other sheets range a1:a100 then return the corresponding Bcolumn value from the different sheet.
Formula
=VLOOKUP(A2,'All Users'!A$2:A$100,'All Users'!B!2:B!100)
Example of 'All Users' Sheet
A B
STAFFIDSTAFFNAME
24177John
10487Paul
20031George
84087Ringo
85772Pete
24485Stuart
3829George
51836Yoko
I currently use the following formula to find the last used cell in a row:
=LOOKUP(2,1/($6:$6<>""),$6:$6)
which works fine but I have been trying to amend it so that it returns the last but one cell in a row. Have tried using it with Offset but without success.
Have found other solutions to finding to the last cell in a row albeit that a number of them do not seem to work with my project and likewise none of them seemed to allow customisation of any sort.
I need to return 100% in a cell for cells B2/A2. If B2 = 0, and A2= 0, I want the result to be 100% as a goal attainment returning 100% in C2.
How do I do this? I get a DIV error as usual.
Here is the formula I used to return the value of the cell.
=+((L2-O2)/250)-0.5
It return negative numbers so I used the If statement below to return 0 for any negative number and then I want it to return the value of the cell if the number is not negative. How do I finish the balance of the if statement to make that happen?
=IF(P2<1,"0",)
The problem I am trying to solve is to have a cell return a cell value based on another linked cell. The cells I want to link are in separate tabs or could be another workbook.
For example if cell A5 in sheet2 is linked to A20 in sheet1...A5 has formula(=Sheet1!A20). I want the next cell B5 to look at A5 and return the value of cell Sheet1!D18.
So in essence I want the second cell to look at the first cell and return a value that is 3 columns over and 2 rows up.
the last date input into a range covering multiple columns and return the date in the cell containing the formula):
{=index(a9:n9,1,max(if(cell("format",a9:n9)="D4",column(a9:n9)))-column(a9)+1)}
My column headings use this pattern:
Column A: Date
Column B: Amount
Column C: Date
Column D: Amount
Column E: Date
Column F: Amount
and so on.
When I use the above formula, I end up with data from the last amount column instead of the last date column.
I currently have a list of totals that i want to easily be able to change the cells that make up this total.
I have been trying to set up one cell that contains the formula and then the remaining totals below are linked to this cell. Thus I change the formula in the top cell all the other totals also change.
Heres my current formula but its justreturning text i would like it to return the cells value
=IF((J2>K2);"value=J2";"(value=k2)")
In column A in sheet 1 I have a list of ID (starting in cell A2), the Id's are repeated and a new Id first appears in cell A30, repaeting the pattern the next new Id is in cell A58. This goes on in the pattern to around cell 44,000. All I want to do is write a formula in another sheet that enables me to have the cell value of A2 on the new sheet and in the next row of the new sheet to have the value of A30 and so on, until I have all the id's individually displayed on the new sheet.
After that I have data from the rest of the row (A2,B2,C2 etc) of sheet 1 in the following cells of the new sheet. After that I'm transposing data from column H of sheet 1 so it appears in the row of the new sheet against the ID's.
Sheet 1
Column headers> (A)Patient name, (B)number, (C)gender, (D)DOB, (E)Sample ID, (F)Hospital, (G)blood test parameter,
(H)Result Row 2 columns A to F repeate to Row 29 then next patient details list. These I want as Row 2 columns A to F in new sheet then the results transpose from column H sheet 1 to new sheet row 2 columns H to AI. (the results I have working with transpose)
I have a column of imported data like this, with scattered blank cells:
Rd Frnt200634350464300399636350
I am doing a multiple regression where the above are independent variables. I usually have hundreds of variables in a column like this. Because each cell must have a value in it (the regression won't accept blanks), rather than manually fill the blank cells with a 0, I set up an adjacent column to convert the blanks to a 0 and regress off that column. But every formula I try still produces a blank in that adjacent column. I have tried things like: =IF(A1="",0,A1) but they do not work. I always get a blank in the adjacent column when the original cell is blank. Can't get a 0 in there.
Is there a formula that will return in A1 the selected cell name in range B1:B10
example : If I click in B2 I will read in A1 the word "B2"
Easy to do with a message box but a formula?
I do not want the user to have to accept macros when he or she opens the file
Edit: If easier I could type in the cells their name and have the formula in A1 return the selected cell's "VALUE"
example In B1 I would type B1 etc...
i have IF sentence that returns either a number or a blank cell (tried using "") in a colum. This data is entered in a chart.
My problem is that that excel dont recognise the "" as a blank cell in my chart.
Is there a way to do this? i could maybe use VBA to make my own function that clear.contents if the cell value is smaler than say 1?
i need to essentially find and replace udf's and the complication is rearranging the parameters in the udf's into a new formula structure.
so my question, is there an easy way to extract a parameter (or all parameters) from a function?
for example, if you had = SUM(A1,A2,A3:A6) you would return 'A1' as the first parameter, 'A2' as the second and 'A3:A6' as the third.
Obviously it gets complicated when you nest functions such as =SUM(IF(A2=1,0,A1),A3) etc and the if() function would be parameter 1.
I have two spreadsheets.
spreadsheet 1:
Lookup from Order numbers listed from A5:A177.
requested formula in I5: I would like a lookup to sheet 2 based on the order number (F19:F191), to return the cell above the first non-blank value.
spreadsheet 2:
Lookup value:Order number listed from F19:F191.
Data search:AY19:CI191
return the (date) which is in the range above the data search from row AY18:CI18.
I've had a look at few forums but i'm getting mixed responses, having to use index / match / lookup / min / --.
I am trying to create individualized worksheets based off a master worksheet. I have different committee names that I want to appear on the individualized sheets, based on whether the person is apart of that committee or not. On my master sheet, I choose the persons name under the committee and I want that committee name to show on the individualized sheet. For example, I want A1 on Master to show on Name 1, B3 and A10 on Master to show on Name 1, C3. Can I write a formula to achieve this or or am I asking too much? In my actual file, I will have about 10 names and 5 committees with one person being on up to all 5 of the committees.
View 1 Replies View Related
