I have an Excel workbook that will be used by multiple users who share a network drive.
I would like to set it up so that the VBA code is ran from a text file stored on the network drive containing the VBA code. Basically a macro would run from the Excel workbook and get the VBA code from the text file and then run that code. Has anyone done this before or can anyone provide the syntax for this process?
Is it possible to write vba code that will generate a text file with ALL changes that were made to an excel file. Ex. If Cell A17 = "Monday, June 4, 2012" and a user updates Cell A17 to "N/A", I would like to know what the value was before and after the udpate was made.
View 8 Replies View RelatedI am trying to inch my way forward to writing a macro that will read in an external CSV file into a sheet (my next task will be to spread the date between multiple sheets based on regions). My first attempt at code is the following
Sub read_csv()
Dim strLine As String
Dim i As Integer
Dim filename As String
Dim ans As String
filename = "C:Documents and SettingsMichaelMina dokumentMina datakällorD123905.csv"
Open filename For Input As #1
i = 1
While Not EOF(1) And i < 10
Line Input #1, sLine
ans = MsgBox(sLine, vbOK, "hello there")
i = i + 1
Wend
' Close filename
End Sub
A couple of problems arise. When I debug the code, if I remove the comment on the close filename, the debugger complains with error 13 (incompatible types). If I comment the line and try and run the code twice in a row, I get a complaint about error 55 - file already open. I'm guessing that the close filename is the correct syntax - if it isn't, what should it be??
Is it possible to write a macro that can import VBA code in a text file then execute it? I need this functionality as I have produced a corporate spreadsheet template that goes out to many people and I will need to be able to update it as requirements change once it has been distributed. So my idea was to build a macro in the template that has the code in it to import the "update code" from a text file that I would send to all the folks that have the template. If the template was centralized, that would save me from this issue but it is however going to be distributed widely.
View 5 Replies View RelatedI am writing some code to open up a file and use the text import as the files are data files. i currently have
View 4 Replies View Relatedto convert Excel file to Text (txt) file using VBA code.
I have data in range A3:C10 of Excel Spreadsheet and I need VBA code to read then write this data into text file and save as .txt file
I am using the below to open a text file and copy the used range to my working workbook. The opening of the file makes the code slow and and also it may be bcoz i am trying to paste 11800 lines of data from one file to another.
Also i can see the flickering of the screen when the files are open. How to make the code faster and more efficient.
Code:
Sub readSimFile()
Application.ScreenUpdating = False
'//code//
Application.Calculation = xlCalculationManual
[Code] ......
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub
I need a VBA code to create a Text file which should be in the form of DML (my scenario is to get Insert Statements for the Data available in the Excel) from Excel Sheet. And this has to be done by assigning a macro to command button where by clicking on it the DML text file should be generated. Even the syntax for the scenario will do.
View 1 Replies View RelatedI have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
Got a slight problem; I am making a "worker-plan", where you should be able to write a name on one file and have it updated (removed) from the equivalent columns on another file automatically. Here's an example with two separate projects:
Project 1 before and after changes:
Attachment 257366
Attachment 257367
Project 2 before and after changes:
Attachment 257368
Attachment 257369
You can see here how I intended it to work. When one worker is moved from Project 1 to Project 2, that worker should also be removed from those weeks in Project 1. The previous worker from Project 2 should also be removed from those weeks (in Project 2).
Are there any formulas that can make this work automatically? All week numbers will belong to the same columns in all files.
Edit: There are 30 files that should be syncronized, not just two.. I could also gather all files into one file with sheets, instead of having seperate files.
I have a spreadsheet where I want to require certain fields to be completed then I want to have that file auto emailed. I have learned that I do need to have the file saved before sending otherwise the data will not appear in the email, so with this I want to have the file temporarily saved emailed then the temp file deleted.
Here is the code I have so far but it errors on the blue text, I did change the TempFileName from = "Copy of " & wb1.Name & " " & Format(Now, "dd-mmm-yy h-mm-ss") to = [C16] & "_" & [B6] & "_" & [D6]
Private Sub CommandButton1_Click()
If Range("B6").Value = "" Or _
Range("d6").Value = "" Or _
Range("f6").Value = "" Or _
Range("E9").Value = "" Or _
[Code] ......
I have a file that I save with a new version number each time I make major changes. The file name currently is: "Telephony Equipment Inventory v26 (Summary).xlsm". The "26" is the variable number. give me the vba code to ensure I open the file with the highest version number?
View 6 Replies View RelatedMy company has files that are already in use. I don't know too many details about how they work, but somehow saving the file will screw it up and my boss has to go back and reset something or other to correct it. Obviously it's connected to some other software somewhere. The code below will block Save and Save-As. BUT how do I get the file to hold onto the code without actually saving the file after the code is added (since the file shouldn't be saved)?
VB:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)
If SaveAsUI = False Then
Cancel = True
[Code].....
I have a macro which imports data from a mainframe dump text file and performs 'Text to Columns' on the imported data so that formula in the spreadsheet can act on the data. The code works perfectly well when I use it, but if a different user logs on and performs exactly the same mainframe dump and import macro the Text to Columns action splits the raw data in a different way and the result is that the split renders the formulae useless.
I've experimented a little and for some reason it appears that the 'Field Info' parameters which are produced when the Text to Columns function is recorded in a macro differ between users even though the raw data is exactly the same.
FieldInfo:= _
Array(Array(0, 1), Array(18, 1), Array(35, 1), Array(56, 1), Array(70, 1), Array(88, 1), _
Array(102, 1))
i want to browse a text file with 10 textual lines and rewrite the contents in the same file (starting from line number 11) from bottom to top.
View 9 Replies View RelatedI have a workbook with many spreadsheet named Sheet1, Sheet2 and so on. Each sheet is filled completely upto 65536 rows. This data is being picked up from a CSV file. In this file there are sites with each site there is a assciated set of data. What happens is the data that extracts data does not differntiate between sites and when it reaches to the end of worksheet it splits the data into next sheet. So I am trying to create a macro to check each spreadsheet starting with the last sheet in the work book for example last sheet in the workbook is seven it should go to sheet6 and if there is a blank row after row 64000 it should cut all the rows and move them to sheet7. Then it should goto sheet5 and do the same and keep on doing it until it reaches sheet1.
View 9 Replies View Relatedfound the following code which works for 1 workbook at a time. I am trying to save 7 workbooks at 1 time. Is it possible?
Sub SaveAsCell()
Dim strName As String
On Error Goto InvalidName
strName = Sheet1. Range("V77")
ActiveWorkbook.SaveAs strName
It will work on the first sheet but none after that. I need to have each workbook saved with the value in cell V77. Also if that is possible, is it possible to change where the file is saved as well?
Right now I have a master workbook that will open the 7 other workbooks, paste data onto several pages in each workbook. I would like the macro to save the workbooks. The workbooks are named: 02 Tuesday, 03 Wednesday, 04 Thursday, 05 Friday, 06 Saturday, 07 Sunday, 08 Monday.
I have a macro that takes a text file as input and produces an excel file as output. I want a macro to store the name of the text file in a variable (without its file extension).
View 1 Replies View RelatedUsing Excel 2010
As I am looping through files in a folder, I would like to determine if the file is a text file.
The problem is that all extensions are variable in a pattern such as .078, .051, etc.
In this instance, the extensions are numeric, but I'm trying to figure out a way to handle that is all encompassing to include *.txt, *.tsv, *.csv, *.prn, etc......
How can I handle these efficiently?
How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................
I've encountered a bit of an odd one. I am opening a tab delimited file, which has been sved as an xls. When I open from file manager, it opens correctly. When I open from Excel, I have to go through 3 screen dictating how the data is set up, and the end result is that a couple of the numbers come through as text, rather than numbers.
Failing an explanation - how do you open workbooks as file system objects - currently I am opening them using
Workbooks.Open Filename:=wb.Path & "/" & ws. Range("B1").Value
If I open them by mimicking the FM, perhaps it will work OK.
I want macro which export each excel column to new text file. The data in excel file is number. The column has only 5 rows that means each new text file should contain five lines of one column. It looks simple but couldn't manage to do macro for it. I have very big data set in one excel file, and have to be splitted into text files. The file name in new text files can be any kind as long as it can be in some sort of order for each export.
View 2 Replies View RelatedI am reading a portion of a string with the FileSystemObject in excel vba. The data I need from the string has a variable length(3 to 5 characters long). Unfortunately if I just pull the first 5 characters from the string, it can include numbers and anything after the data that I don't want. Can someone help me figuer out how to do this.
View 9 Replies View Relatedconverting to a text file from Excel.
The below code worked in 2003, but now I have put it in 2007 with just a change in the Range to work with.
What I'm getting is a Text file with, for lack of a better term, hyroglifics (sp).
Not the numbers that I should get like I got in 2003....
how to word it but if someone understands then please help. I have two excel data files namely Book1.xls & Book2.xls. Both files have different data in it. Both files contain macros. When these macros run the files become **FINALIZED** version.
Originally, I get the above files in my email as txt. attachments. I then move these two txt files to my desktop in a folder called Folder-1. Then I open these files as an Excel and save them.
Basically, I need to know if two txt files are sitting in a folder-1 on my desktop. What can I do or what can I clik that....those two text files get converted into excel automatically, including running that macro I talked about in the above paragrah.
To put it differently, if I have two txt files Book1.txt, Book2.txt in a folder, how can I automatically create an excel **FINALIZED**version which sits right next to their txt version.
I am using Windows XP and Office 2003.
I am looking to automate a process where information is sent to someone in a text format and they in turn transfer that data to an excel file. It basically looks like this (but includes a lot more info):
Service Request #: 123456
Instrument Type: New Instrument
Lot/Serial #: 123456
SR Type: Product Complaint
Service Coverage: Maintenance Agreement
The info on the left (text preceding the colon) is always the same but the values following the colon can change. The excel file has all of the text before the colon and they just enter the information into the cells. I am looking to make it so that an Excel macro (or maybe a word/outlook macro) automatically scans the text document and sends this info to the exact same cells in excel every time.
The text file is actually a message from an Oracle database and I am not going to be able to make any changes to the way the data comes in.
I have problem to change text code into numerical code using macro. i have data contain text code and i would like to convert it into numeric . each text code has dedicated numerical code for example I have 4 fluids with text code text code:
FW = Fresh water
SW = Saline eater
CW = connate water
MW = Meteoric water
numeric code as follow
FW=1
SW=2
CW=3
MW=4
I would like to convert the text code into numeric code, it is easy if using excell , but it is routine job for me , i need to create macro to be more simple .
I created a vb macro to open a text file then process the file then close the file. Here is my problem:
Problem: THe text file has rows of data in it as follows
5155111111551511111111111511111111111111111
This row of text gets converted to
5.16E+42
because excel treats the row of text as a number but i dont want it to do this transition.
When i save the file and then reopen it using say NOTEPAD i see 5.16E+42 and not the long string of text.
- I have excel file with data I need
- I have fixed txt(html) template that i need to integrate Excel information into
- Final result that I want to achieve is saved .txt(html) file with combination of fixed information (text) and data from excel cells.
I need to writing a VBA code for each of above (integrating text & cells, saving results as text)