I need To have them excecute automatically once data Is enter into a cell In column A:
I 've attempted onEvent configurations starting with -
Sub FillScanSheet()
ActiveCell.EntireColumn.Select
If ActiveCell > 1 Then
Application.Run Concat
Application.Run InsertLocation
Application.Run Dupes
End If
However I keep getting a circular reference error --
I am using a Textbox1_Exit event that (if certain values are true) sets the focus to different Textbox. However, when I invoke the Textbox3.SetFocus, it redoes all the code in the Textbox1_Exit event since it's technically leaving now.
How do I stop this from happening and ensure that the Exit event happens once? OR How do I properly SetFocus inside an Exit event?
I need my macro to run when the spreadsheet is Saved. Is that process written in the macro code or is there an existing event control in Excel to accomplish this? Running Excel 2007. I tried searching the forum & found one post that ran the macro on open, but couldn't set that up to work on save.
how to make a code so that it captures the event of pressing any key of the keyboard and triggers a macro.
I tried using OnKey method but the problem with this is I am getting stick to any particular button whichever i specify in the onkey method wheareas I want to keep it general for any button in the keyboard.
Also if anyone can suggest how can I use OnKey method to use the "S" key to launch a macro.
I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...
At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!
I have a list of hyperlinks in excel with check boxes next to each, does anyone know how I can do a macro that will run another macro if the check box is checked and ignore the macro if it isnt checked???
I am having difficulties with my Worksheet_Activate() macro. It works great within workbook1 when it is only workbook1 open - but when I open another workbook2, the macro stills runs, presumably because Sheet1 of workbook1 is still activated as well as the newly activated sheet in workbook2.
Is there a way to ensure that only 1 worksheet of 1 workbook is activated at a time? Or that sheet1 of workbook1 is deactivated when workbook2 is opened/clicked on? I need my Worksheet_Deactivate macro to run to get rid of my Worksheet_Activate macro (which runs an application that resets the function of keyboards keys). Otherwise moving around workbook2 is a nightmare. When I navigate back to workbook1 while workbook2 is still open, I still want sheet1 of workbook1 to be activated and my macro to run .
I have a textbox from the drawing toolbar. When someone changes a cell then clicks in the textbox, Worksheet_Change does not run. If they double click in the cell, that's OK I can capture that event and protect the sheet, stopping them clicking in it. But if they just start typing in the cell, I can't capture that. I have seen some API code which captures keypresses, but it is not practical to use as it loops repeatedly. I could lock the textbox and have the user do something to unlock it, but this is a last resort.
When I send a workbook with macros to some of my users, they either can not open the workbook due to there being macros or they have to enable them each time the workbook is opened. I know there is a way to correct this, but I don't know how to look this up in help so I am coming to my trusted friends on Excel Forum. I would also like to know what this is called as I slightly remember that there is a name for this.
I currently use an Excel program (with macros) that run weather forecast data. It is compatible with versions XP, 2003, 2007 and 2010. However, I am trying to figure out if I can run it on a Mac. My plan is to run windows on my Mac through Parellels or VMWare Fusion.
Here is a link to the Excel Program: TX Tornado Forecast Worksheet
I usually run it on a different server while I work on another available server. However, if I am in Excel on a different server working, I cannot copy and paste in Excel (if I try to copy & paste, I end up pasting data from the macro). This makes sense since the macro is copying & pasting but is there any way around this? I purposely didn't past the code since it's huge but it has a lot of "cells.copy, activesheet.paste, etc".
I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.
combine two Worksheet Change event macros into the one macro? The macros are listed below.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)On Error GoTo exitHandler Dim rngDV As Range Dim lRow As Long Dim lCol As Long
[Code]...
exitHandler:
Application.EnableEvents = True End Sub Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("O:O")) Is Nothing Then Application.EnableEvents = False
I am encountering an error(-2147417848) when running my existing code. I did a little research and found on MSKB Q319832 information that suggests that I might try qualifying my code (not that I know what that means : D) In the article, it suggests using something like the below:
Dim oXL As Excel.Application Set oXL = New Excel.Application oXL.Visible = True ..... ..... oXL.Quit Set oXL = Nothing
I tried this approach and it fails as soon as it hits the event portion of the macro:
If oXL.Target.Address = "$C$2" Then .... End If
I need to understand how the oXL object is used against information in my existing workbook.
I have to run several different types of macros depending on the folders. each folder contains several excel files. so what i want to do is if a folder has a certain name run a certain macro, Here is the code:
VB: Sub Macro1() '//Change the path to the main folder, accordingly Call RecursiveFolders("C:Path") End Sub
[Code]....
then call macro 2 end what syntax code should go there?
Our department receives weekly and fortnighly updated workbooks from a number of different departments. Each workbook contains 10s of worksheets. Our department analyzes the data and generates reports from those worksheets.
I have developed a few macros to automate the report generation for making the computing of my colleagues easier.
Now, the problem is that all the macros are developed behind individual sheets and some modules. For this reason, my colleagues have to copy each updated sheet and paste over the older ones individually, each and every time. It is really quite time-consuming task - deleting older data from all the worksheets and then copying fresh data on each of them, one by one.
They want to make their life easier by just replacing the entire workbooks with the new ones and still want the macros functioning, as usual.
My concern is how I can put all the code in a separate workbook and how to reference data from the other workbook.
I have been writing VBA code in Excel for about 4 years, but I am self-taught, so I only know what I have had to learn. Recently, I learned that I could run a macro from a cell formula. I created several hundred cells (on multiple worksheets) that include calls to various macros. I only want to run these when I know they need to be updated, not every time I change a cell value.
I turn on Design Mode and try to modify my worksheet (adding or removing columns, rearranging stuff) and some macro(s), somewhere(?) execute every time. This can sometimes take 15-20 seconds for everything to update.
Did I hit some magic key sequence, somewhere? How is it that some of my macros, somewhere are running with Design Mode enabled (and turning it OFF, by the way)?
Whenever I share a workbook, I experience problems running macros that are problem-free otherwise. I’ve read the help menu about restrictions of using shared workbooks, but I did not run across anything that might explain this behavior. I’ve experimented with a few spreadsheets and I run across this problem in all cases. Can anyone help with an explanation or past experience? I’m assuming that by sharing a workbook, the workbook is automatically protected for both windows and structure. If this is what is causing the problem, is there code I can use to still allow my macros to run trouble free in a shared workbook?
I have made a vba program in excel 2003 that opens a worksheet using Workbooks.Open, and copies all the worksheets out into the program etc. The worksheets that I am opening have macros that automatically execute when the worksheet is opened (opening up some forms ). These macros are running when I open the file using VBA. How can I prevent this from happening. The automatically executed code in the workbook being opened is located in "this workbook" and can be seen below.
Private Sub Workbook_Open() Dim CfileName As String 'Check Config sheet for template state If Config.Cells(10, 3) = 1 Then CustomizeDirInfo.Show End If
If Config.Cells(10, 3) = 2 Then GetConfData GetGrpData StdFileGen.Show Else Exit Sub End If End Sub
Here is a sample of code I am having problems with:
Sub CheckBox1_Click() Range("Make") = Range("Make1").Value Range("Model") = Range("Model1").Value Application.Run ("EnterPrice") Aplication.Run ("Unit Selection") CheckBox1.Value = True End Sub
I am having problems with the named ranges "Make" and "Model" which are on another sheet and with runninh the "EnterPrice" and "Unit Selection" Macros which are in Module1, I get the error message "Method 'Range' of object '_Worksheet' class failed"
I am copying web data into Excel and need a creative way to run a couple formatting macros on the data. I’m looking for the best way to initiate the macros. I cannot use command buttons because they’ll get deleting as a result of the line “DrawingObjects.Delete”.
I’d like to use a Useform with a couple buttons but am not sure how to have it automatically display when needed and hidden when not needed. I also prefer not using toolbars button unless they will only be displayed in that workbook and not any others.
I have the following code as workbook module but it is not working, I have tried fiddling with it but I cannot work out what is wrong, can anyone help please.
I have sent an Excel application to a colleague's computer. When she tries to access/run any of the macros (assigned to buttons), Excel displays and error inidcating that they are not found.
Looking under Tools/Macros they are there.
On my computer the a macro name is for example "Submit", preceded by the full path and file name. On the colleagues computer they show up as "Module5.Submit" (with the current path and filename), where the module number is the actual module number displayed in the VB Project.
Is there a VB setting that is responsible for including the module number and how would I turn this off?
I have 3 macros, 2 of them puts formulas in 2 separate cells and the other to turn off file save, file save as and the Save button. Everything was working fine until I password protected the project, now the macros quit loading. I can still run them manually and they work fine, they just don't run when the spreadsheet is loaded. (What I wanted to do was prevent users from seeing the formulas by saving the spreadsheet after the formula was put in the cell and also by looking at the macro). I've unpassword protected the project and took out the macro to prevent the Saves. What do I need to look at to get the macros to run when the spreadsheet is loaded?
I now have the spreadsheet I want to distribute saved as an add in stored in a network repository. RoyUK has provided me with some links with code I lifted to add custom menu items.
The last problem I have is that I'm not trying to call a macro, but am instead trying to load the sheets (there are 4 sheets) and forms (there are 7 forms).
With what I have now, I can launch a macro with no problem, but cannot get the sheets / forms displayed to the user. I've tried launching a form by loading / showing it, but I get error message (runtime error 9).
