Prevent Combobox Change Running Other Control Event Procedures

May 17, 2008

I have a userform with a combobox in it that's rowsource is a column of company names in a worksheet. When a company name is chosen, a combobox change private sub runs and many userform textboxes are populated with information about the company that was chosen from the combobox dropdown. This information is stored on a worksheet. I then want to edit any of the information in these textboxes. Once my edits are made I have a CommandButton that is pressed to save the edit changes. This CommandButton runs a private sub that disables the combobox (thinking this would prevent the combobox private sub from running), deletes the row that the information originated from, and then SHOULD make a new row of values based on the contents of the textboxes following the edits. The problem is that the CommandButton coding that deletes the row causes the combobox change private sub to run because the company that had been selected is now the missing from the rowsource; this causes an error.

View 8 Replies


ADVERTISEMENT

Prevent Control Event Procedures Firing

Apr 27, 2008

I have CheckBox1 (.Value = FALSE) on the UserForm and when I run my sript ... this change Value to TRUE and run the subrutine Private Sub CheckBox1_Click. I need block this step with using VBA code.

View 4 Replies View Related

OleObject ActiveX ComboBox Event Procedures

May 23, 2009

I've searched the web and OzGrid all day, and still have this question: what is the equivalent for .OnAction when using a ComboBox as shown in the code below. Everything else works as desired.

Loopcntr = 1

Set xyz = ActiveSheet. OLEObjects.Add(ClassType:="Forms.ComboBox.1", Link:=False, DisplayAsIcon:=False, _
Left:=Target.Left, Top:=Target.Top, Width:=Target.Width, Height:=Target.Height)

'''??? xyz.OnAction = "TDListing"
xyz.Object.BackColor = RGB(204, 255, 204)

Do While Loopcntr <= TaskListArraySizeHolder
DDholdName = TaskListArray(Loopcntr)
xyz.Object.AddItem DDholdName
Loopcntr = Loopcntr + 1
Loop

View 5 Replies View Related

Prevent Event Code Running

Oct 19, 2007

I know how to enable/disable events using VBA code, however is there an option within excel to turn it on/off? My problem is this...

At the beginning of my code I disable events and at the end I enable it again (I need to do this to avoid being caught in a loop). However something is going wrong somewhere in my code and the code stops halfway through. I'm trying to test sections of the code, but I often inadvertently stop the code without enabling the events again. Therefore I can't get my VBA to execute again unless I close excel down and restart. This is a pain as I have to find my place in the code again!

View 5 Replies View Related

Prevent Event Code Running When Other Workbooks Open

Aug 23, 2008

I am having difficulties with my Worksheet_Activate() macro. It works great within workbook1 when it is only workbook1 open - but when I open another workbook2, the macro stills runs, presumably because Sheet1 of workbook1 is still activated as well as the newly activated sheet in workbook2.

Is there a way to ensure that only 1 worksheet of 1 workbook is activated at a time? Or that sheet1 of workbook1 is deactivated when workbook2 is opened/clicked on? I need my Worksheet_Deactivate macro to run to get rid of my Worksheet_Activate macro (which runs an application that resets the function of keyboards keys). Otherwise moving around workbook2 is a nightmare. When I navigate back to workbook1 while workbook2 is still open, I still want sheet1 of workbook1 to be activated and my macro to run .

View 7 Replies View Related

Prevent Worksheet Change Event Causing Chain Reaction

Jan 14, 2008

I'd like the users to be able to change some detail in a couple of places and have it updated throughout the spreadsheet. Basically, the user can change the line name in any of the input sheets and the code changes the sheet name, and searches for the reference to the old name in the overview sheet and changes it accordingly.

The problem I have at the moment is that I would also like the user to be able to change the line name from the overview sheet too... I am having trouble thinking how to have similar code in the "Overview" sheets Worksheet_Change event without getting into a big constant loop... e.g. if the line name is changed via code on the individual input sheets won't that then trigger the first code, which will trigger the second etc. etc. I have the following code in the ThisWorkbook section:

Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim sName As String
Dim sOldName As String
Application. ScreenUpdating = False
sOldName = ActiveSheet.Name
If Target.Address <> "$B$1" Then Exit Sub
sName = ActiveSheet.Range("B1")
On Error Goto ErrorHandler
ActiveSheet.Name = sName
On Error Goto 0
Sheet8.Select 'this is the overview sheet
Cells. Find(What:=sOldName, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate........................

View 2 Replies View Related

Combobox Change Event

Apr 17, 2009

Dim bfr As Long
bfr = ComboBox1.Value
ComboBox1.Value = bfr: Exit Sub

how come this gives me a "cant change property" error!?

The code is inside my combobox change event...

View 9 Replies View Related

Spreadsheet Control (monitor For The Cell Change Event)

Jun 16, 2009

I have a spreadsheet control inside of a userform. I can generally access this spreadsheet and do what I need to do with it. My problem is that I need to monitor it for the cell change event. I normally accomplish this with:

View 4 Replies View Related

Control Change Event Fires Via Unknown Trigger

Nov 17, 2007

So, I have a worksheet with a bunch of combo boxes. The code for the worksheet is below. The issue I'm having is that anytime I drag and drop a cell anywhere on the page, every single control on the worksheet triggers. VB runs through all the code on the sheet, TWICE(I used the debugger extensively trying to find a solution), and causes dozens of successive re-calculations of the entire workbook, which has a couple of tables. This happens on any cell drag-drop on the worksheet, or when I click the command button on the screen.

I have no clue what is causing this. Even more bizarre, it seems to trigger a custom function which is located in a separate module, and isn't even utilized on the worksheet in question. I guess this is because it makes the whole workbook re-calculate?

View 7 Replies View Related

Populate Textbox From Change Event In Combobox

Mar 3, 2014

I have attached an example set up with a user form I am building. I currently have the first combo box loading upon the initialize of the user form an from that I choose one of the product types and it gives me a list with all product names associated in the second combo box. Upon a change event in the second combo box I want to populate the 3rd Column with the count of how many of that Product type.

I have a couple different code set ups in the attached sheet and neither works.

CmboBxtoTextbox.xlsm‎

View 7 Replies View Related

ComboBox Change Event Gives Error 1004

Jan 3, 2013

The following code works fine, but when I put the code in an ActiveX Combobox Change Event it gives a run-time error 1004. ("Select Method of Range class failed")The error occurs on the following line

Code:
Worksheets("SAVED").Range("A" & l).Select

Code:
Dim l As Long
Application.ScreenUpdating = False
l = Application.WorksheetFunction.Match(Worksheets("DATA").Range("O34"), Worksheets("SAVED").Range("A1:A10000"), 0)
Worksheets("SAVED").Activate
'ROSTER===
Worksheets("SAVED").Range("A" & l).Select
Selection.Resize(1, 739).Offset(1, 2).Copy

[code]......

View 2 Replies View Related

ComboBox Fires Worksheet Change Event

Nov 2, 2006

Is it possible for a combo box selection, linked to a cell on the same sheet to fire a worksheet change event? I can't seem to find a way to do it.

View 3 Replies View Related

Combobox Control (change To Respective Given Color)

Jun 1, 2009

I have a problem with combobox,
when an item in a combobox is selected (control tool box combobox)
then the color of the cell in excel worksheet have to change to respective given color

View 9 Replies View Related

Change Event: Not Firing From Cell Changed By ComboBox

Dec 4, 2006

Private Sub Worksheet_Change(ByVal Target As Range)
With Target.Cells(1, 1)
If Not Intersect(.Cells, Range("b3:b6")) Is Nothing Then
Range("b7") = "Not Found"
For i = 3 To 6: txt = txt & Cells(i, "b").Value & "_": Next
For Each r In Range("m3", Cells(3, Columns.Count).End(xlToLeft))
For i = 0 To 3: txt2 = txt2 & r.Offset(i).Value & "_": Next
If txt = txt2 Then
Range("b7").Value = r.Offset(4).Value
Exit For
End If
txt2 = ""
Next
ElseIf Not Intersect(.Cells, Range("b16:b19")) Is Nothing Then
Range("b20") = "Not Found".....................

I'm working with this code right now. The problem is the macro will only work if i type the numbers manually. if the values are retrieved from a combobox, the code above down not work as it cannot read the values.

View 9 Replies View Related

How To Change Font Size Within Combobox (Form Control)

Feb 1, 2014

I have a combo Box (Form Control) in my spreadsheet which is basically used as a drop down menu.

How do I change the font size of the text that appears in the box?

View 2 Replies View Related

Determine Order Of Event Procedures

Aug 19, 2008

I am trying to determine if it's possible to control the order of like events. In other words, if I have set up two Worksheet_Change events, can I control which one fires first? Or, as a second best, can I determine which one will fire first?

I am using Office XP on Windows XP, but I'm looking for a generic solution if possible.

View 5 Replies View Related

Target In Event Procedures Macros

Mar 27, 2008

what do people meen when they say target and how is it used from what i can gather its somthing to do with the active cell?

View 9 Replies View Related

Pass UserForm Control Values To Sub Procedures

Apr 19, 2008

I have been trying to use a multi-select listbox as the argument for a subroutine. For some reason, I keep getting a run time error, type mismatch. I'm baffled because when I define the specific listbox, it works fine, but when I attempt to pass the listbox I get an error.

Public Sub OtherDirectTotal(Expense As ComboBox, CostCat As ComboBox, _
Cost As TextBox, Years As Msforms.listbox)
Dim IDC As Double
Dim IDCt As Double
IDC = Val(UserForm2.txtIDC) / 100
If Years.Selected(0) = True Then
If Expense = "Sponsored" Then
If UserForm2.ChkODC = False Then
Select Case CostCat......................

View 2 Replies View Related

Avoid Hard Coding Control Name Inside Control Event Procedure?

Mar 4, 2014

Is there any way in VBA to refer to a control in its own event procedure without referring to it by name/hard-coding?

It might be clearer to explain by a dummy code example:

[Code] ......

I'm seeking what I would need to replace Line1 with.

View 11 Replies View Related

Dismiss ComboBox Dropdown While ComboBox Code Is Still Running

Dec 8, 2009

When I make a comboBox selection from the dropdown menu, the menu stays down until the last statement of the comboBox code is finished. How do I make the dropdown disappear immediately after the selection is made?

View 9 Replies View Related

Worksheet Change Event :: (ByVal Target As Range) Event In Module After Creating A Sheet

Mar 27, 2009

Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?

View 9 Replies View Related

Prevent Worksheet_Change Event

Mar 12, 2008

I'm trying to find a way to bypass a worksheet_change event. Right now, my code validates if a change has been done to a specific cell ("D13"). It works perfectly, too perfectly actually.

Here is the code I got :

First line of Module 1 :

Public bDeviation As Boolean

On Sheet1 :

Public Sub Worksheet_Change(ByVal Target As Excel.Range)

Dim VRange As Range
Dim strName As String

Application. ScreenUpdating = False

View 4 Replies View Related

Prevent VBA Macro Firing Event Code

Nov 23, 2009

I'd like to know if there is a change event that only occurs when a target cell is changed by the user, but does not occur when i'ts changed by a macro. nfortunately, the Worksheet_Change event occurs in both cases.

View 2 Replies View Related

Prevent Private Sub Macro From Running

Nov 14, 2008

I need a line of code so that when I hit commandbutton2, the Private Sub Worksheet_Change(ByVal Target As Range) event macro on the same page DOESN'T run. The button clears certain lines, and when it runs the change event it ends up in an error, and I don't need it to run when hitting the commandbutton.

View 6 Replies View Related

Prevent Macro From Running If Cell Is Red

Apr 29, 2008

I have a macro that is run by clicking on a macro button. The macro copies the data from Sheet1 and pastes it in another sheet, Sheet2. I added some conditional formatting that colors certain cells red if others are blank on Sheet1. I would like to add some code to my macro that will not allow it to copy and paste from sheet1 to sheet2 if there are any red cells in the range.

View 9 Replies View Related

How To Prevent Auto Macros From Running

Sep 11, 2008

I have made a vba program in excel 2003 that opens a worksheet using Workbooks.Open, and copies all the worksheets out into the program etc. The worksheets that I am opening have macros that automatically execute when the worksheet is opened (opening up some forms ). These macros are running when I open the file using VBA. How can I prevent this from happening. The automatically executed code in the workbook being opened is located in "this workbook" and can be seen below.

Private Sub Workbook_Open()
Dim CfileName As String
'Check Config sheet for template state
If Config.Cells(10, 3) = 1 Then
CustomizeDirInfo.Show
End If

If Config.Cells(10, 3) = 2 Then
GetConfData
GetGrpData
StdFileGen.Show
Else
Exit Sub
End If
End Sub

View 9 Replies View Related

Change Event Causing Event To Fire Again

Aug 7, 2006

I have the following code, which works perfectly:

Private Sub Worksheet_Change(ByVal Target As Range)

Dim TotalDays As Integer

TotalDays = Range("C65536").End(xlUp).Row + 1

The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.

However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.

How do I add the following, to my previous code?

Range("E8").Value = Cells(7, 6) * 2.5

View 9 Replies View Related

Prevent Custom Functions From Running Simultaneously?

Jul 31, 2014

I have this excel file with some functions inside a Pivot Table, which use a year value as filter (the value comes from a report filter field) and data from a different spreadsheet to calculate a percentile value ... I created custom functions to replace the excel functions, passing the values as parameters.. The problem is now that when we refresh the connection (Refresh All button under DATA tab) the cells that contain the values returned by the custom function lose those values (go blank) In order to get the values I need to select the filter value again, while when I was using the normal PERCENTILE function the values would always refresh normally

Now... I think the problem might be related to the fact that the spreadsheet in question calls 5 different custom functions at the same time.... and, those 5 function call another at least two more helper functions... so, maybe this recurrence in calling the functions is causing the thing to break up

Is there a way I can prevent this from happening? Maybe put some flag or something that will cause the functions to be executed one by one, and not all at the same time?

View 2 Replies View Related

Prevent Down Arrow Moving To Next Form Control

Mar 13, 2008

I have multiple dropdown lists (forms combobox, NOT activex) on a worksheet -- once the user selects them, a keypress on the downarrow will move to the next dropdown list.

is there a way of preventing this? instead, i would like to move focus to the next cell (same column, 1 row beneath the combobox)

View 9 Replies View Related

Running Macros On Event

Jul 3, 2006

Excel 2003

I have three macros:

Sub Concat()

ActiveCell.FormulaR1C1 = "=IF(RC[-1] > 1,CONCATENATE(""*"",RC[-1],""*""),"""")"

End Sub
Sub InsertLocation()

ActiveCell.FormulaR1C1 = "=IF(RC[-2] > 1, R[2]C[2],"""")"

I need To have them excecute automatically once data Is enter into a cell In column A:

I 've attempted onEvent configurations starting with -

Sub FillScanSheet()
ActiveCell.EntireColumn.Select
If ActiveCell > 1 Then
Application.Run Concat
Application.Run InsertLocation
Application.Run Dupes
End If

However I keep getting a circular reference error --

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved