Displaying Userform & Running Macros
May 11, 2006
I am copying web data into Excel and need a creative way to run a couple formatting macros on the data. I’m looking for the best way to initiate the macros. I cannot use command buttons because they’ll get deleting as a result of the line “DrawingObjects.Delete”.
I’d like to use a Useform with a couple buttons but am not sure how to have it automatically display when needed and hidden when not needed. I also prefer not using toolbars button unless they will only be displayed in that workbook and not any others.
View 9 Replies
ADVERTISEMENT
Nov 11, 2011
What I am hoping to accomplish is have cells D3 & E3 display the numbers being cycled as it cycles through the loop statement. Current code is below.
Private Sub CommandButton1_Click()
Dim iRnd1 As Integer, iRnd2 As Integer, n As Variant, strJustice
Dim Counter 'tf
[Code].....
View 5 Replies
View Related
Jul 19, 2006
I would like to prompt the user of my Excel Macro, with a particular message which would appear while the code is running in the background, and then dissapear once the code if finished executing.
For instance:
I prompt the user "Do you want to run a new Query", Yes, No, or Cancel.
If they select yes, I would like a message appear that would advise them that "this may take some time, please be patient" and possibly give them a button that would allow them to cancel the process, all the while this process is running. Once the query is complete, the message would dissapear, or if they click on the cance button.
View 9 Replies
View Related
Mar 13, 2009
is to display a set of data based on filtered information.
My Data base:
Company Department Name
A X John
A Y Joe
A X Jane
B Y Bob
C Z Kate
A X Kerri
Based on user selection of Company and Department, I want to be able to display the relavent names.
If user chose Company A, and Department X, I want to be able to display
John
Jane
Kerri
I've used the ROWS, Index, Small combination that works perfectly (Please see sample below). However, since the this software doesn't support the ROWS function, and doesn't support Macros.
View 7 Replies
View Related
Jul 28, 2006
I have a list of hyperlinks in excel with check boxes next to each, does anyone know how I can do a macro that will run another macro if the check box is checked and ignore the macro if it isnt checked???
View 3 Replies
View Related
Nov 19, 2009
When I send a workbook with macros to some of my users, they either can not open the workbook due to there being macros or they have to enable them each time the workbook is opened. I know there is a way to correct this, but I don't know how to look this up in help so I am coming to my trusted friends on Excel Forum. I would also like to know what this is called as I slightly remember that there is a name for this.
View 5 Replies
View Related
Mar 18, 2013
I currently use an Excel program (with macros) that run weather forecast data. It is compatible with versions XP, 2003, 2007 and 2010. However, I am trying to figure out if I can run it on a Mac. My plan is to run windows on my Mac through Parellels or VMWare Fusion.
Here is a link to the Excel Program: TX Tornado Forecast Worksheet
View 2 Replies
View Related
Dec 6, 2006
I have a macro created that at the mo is assigned to a button. But I would like the macro to run as soon as the spreadsheet is opened.
View 9 Replies
View Related
Feb 29, 2008
I usually run it on a different server while I work on another available server. However, if I am in Excel on a different server working, I cannot copy and paste in Excel (if I try to copy & paste, I end up pasting data from the macro). This makes sense since the macro is copying & pasting but is there any way around this? I purposely didn't past the code since it's huge but it has a lot of "cells.copy, activesheet.paste, etc".
View 9 Replies
View Related
Mar 21, 2008
I have a simple Macro. I assigned to a Form button.
when i click that button systems takes lots of time to complete the macro.
left down task bar it say calcuating cells and load from 1% to 100% ...
View 9 Replies
View Related
Jul 3, 2006
Excel 2003
I have three macros:
Sub Concat()
ActiveCell.FormulaR1C1 = "=IF(RC[-1] > 1,CONCATENATE(""*"",RC[-1],""*""),"""")"
End Sub
Sub InsertLocation()
ActiveCell.FormulaR1C1 = "=IF(RC[-2] > 1, R[2]C[2],"""")"
I need To have them excecute automatically once data Is enter into a cell In column A:
I 've attempted onEvent configurations starting with -
Sub FillScanSheet()
ActiveCell.EntireColumn.Select
If ActiveCell > 1 Then
Application.Run Concat
Application.Run InsertLocation
Application.Run Dupes
End If
However I keep getting a circular reference error --
View 7 Replies
View Related
Mar 23, 2007
I want to run a recorded macro on the whole workbook at once, not just on the active worksheet.
View 3 Replies
View Related
May 15, 2013
I have to run several different types of macros depending on the folders. each folder contains several excel files. so what i want to do is if a folder has a certain name run a certain macro, Here is the code:
VB:
Sub Macro1() '//Change the path to the main folder, accordingly
Call RecursiveFolders("C:Path")
End Sub
[Code]....
then call macro 2 end what syntax code should go there?
View 5 Replies
View Related
Jun 9, 2008
Our department receives weekly and fortnighly updated workbooks from a number of different departments. Each workbook contains 10s of worksheets. Our department analyzes the data and generates reports from those worksheets.
I have developed a few macros to automate the report generation for making the computing of my colleagues easier.
Now, the problem is that all the macros are developed behind individual sheets and some modules. For this reason, my colleagues have to copy each updated sheet and paste over the older ones individually, each and every time. It is really quite time-consuming task - deleting older data from all the worksheets and then copying fresh data on each of them, one by one.
They want to make their life easier by just replacing the entire workbooks with the new ones and still want the macros functioning, as usual.
My concern is how I can put all the code in a separate workbook and how to reference data from the other workbook.
View 9 Replies
View Related
Apr 8, 2012
I have been writing VBA code in Excel for about 4 years, but I am self-taught, so I only know what I have had to learn. Recently, I learned that I could run a macro from a cell formula. I created several hundred cells (on multiple worksheets) that include calls to various macros. I only want to run these when I know they need to be updated, not every time I change a cell value.
I turn on Design Mode and try to modify my worksheet (adding or removing columns, rearranging stuff) and some macro(s), somewhere(?) execute every time. This can sometimes take 15-20 seconds for everything to update.
Did I hit some magic key sequence, somewhere? How is it that some of my macros, somewhere are running with Design Mode enabled (and turning it OFF, by the way)?
View 2 Replies
View Related
Dec 14, 2002
Whenever I share a workbook, I experience problems running macros that are problem-free otherwise. I’ve read the help menu about restrictions of using shared workbooks, but I did not run across anything that might explain this behavior. I’ve experimented with a few spreadsheets and I run across this problem in all cases. Can anyone help with an explanation or past experience? I’m assuming that by sharing a workbook, the workbook is automatically protected for both windows and structure. If this is what is causing the problem, is there code I can use to still allow my macros to run trouble free in a shared workbook?
View 9 Replies
View Related
Sep 11, 2008
I have made a vba program in excel 2003 that opens a worksheet using Workbooks.Open, and copies all the worksheets out into the program etc. The worksheets that I am opening have macros that automatically execute when the worksheet is opened (opening up some forms ). These macros are running when I open the file using VBA. How can I prevent this from happening. The automatically executed code in the workbook being opened is located in "this workbook" and can be seen below.
Private Sub Workbook_Open()
Dim CfileName As String
'Check Config sheet for template state
If Config.Cells(10, 3) = 1 Then
CustomizeDirInfo.Show
End If
If Config.Cells(10, 3) = 2 Then
GetConfData
GetGrpData
StdFileGen.Show
Else
Exit Sub
End If
End Sub
View 9 Replies
View Related
Jun 10, 2009
Here is a sample of code I am having problems with:
Sub CheckBox1_Click()
Range("Make") = Range("Make1").Value
Range("Model") = Range("Model1").Value
Application.Run ("EnterPrice")
Aplication.Run ("Unit Selection")
CheckBox1.Value = True
End Sub
I am having problems with the named ranges "Make" and "Model" which are on another sheet and with runninh the "EnterPrice" and "Unit Selection" Macros which are in Module1, I get the error message "Method 'Range' of object '_Worksheet' class failed"
View 9 Replies
View Related
Feb 19, 2007
I have the following code as workbook module but it is not working, I have tried fiddling with it but I cannot work out what is wrong, can anyone help please.
Private Sub Workbook_Open()
Dim ws As Worksheet ....
View 9 Replies
View Related
Sep 21, 2007
I have sent an Excel application to a colleague's computer. When she tries to access/run any of the macros (assigned to buttons), Excel displays and error inidcating that they are not found.
Looking under Tools/Macros they are there.
On my computer the a macro name is for example "Submit", preceded by the full path and file name. On the colleagues computer they show up as "Module5.Submit" (with the current path and filename), where the module number is the actual module number displayed in the VB Project.
Is there a VB setting that is responsible for including the module number and how would I turn this off?
View 9 Replies
View Related
Jan 28, 2009
I have been working on some Macros. I am compiling a macro that runs other macros. I have two noticeable problems.
1 - My SaveAs macro runs fine by itself. But when called or ran by another macro, (which calls more than one macro) the SaveAs macro it stops.
2- Many of my macros, when ran by another macro (which runs more than one macro) cycles through twice.
My specific question is about no. 2 and the following are the individual macros and the macro that runs them.
View 2 Replies
View Related
Mar 14, 2009
I have 3 macros, 2 of them puts formulas in 2 separate cells and the other to turn off file save, file save as and the Save button. Everything was working fine until I password protected the project, now the macros quit loading. I can still run them manually and they work fine, they just don't run when the spreadsheet is loaded. (What I wanted to do was prevent users from seeing the formulas by saving the spreadsheet after the formula was put in the cell and also by looking at the macro). I've unpassword protected the project and took out the macro to prevent the Saves. What do I need to look at to get the macros to run when the spreadsheet is loaded?
View 4 Replies
View Related
Sep 28, 2009
I now have the spreadsheet I want to distribute saved as an add in stored in a network repository. RoyUK has provided me with some links with code I lifted to add custom menu items.
The last problem I have is that I'm not trying to call a macro, but am instead trying to load the sheets (there are 4 sheets) and forms (there are 7 forms).
With what I have now, I can launch a macro with no problem, but cannot get the sheets / forms displayed to the user. I've tried launching a form by loading / showing it, but I get error message (runtime error 9).
View 3 Replies
View Related
Oct 5, 2007
I have 3 seperate macros (macro1, macro2, macro3) that have to be run in order. Is it possible to create a macro to run them in order and what would the code look like? I will have it assigned to a button on the worksheet.
View 9 Replies
View Related
May 26, 2011
I have inherited support for a suite of Excel 2003 spreadsheets with complicated macros which run fine on XP. Having been tasked to test them on Windows 7 with Office 2010, I have not converted them as they are run by several sites globally who may not upgrade to Office 2010 at the same time. Hence they run in compatibility mode which in general is fine.
However, certain macros are veeeery slow and to the user would look like the app has hung. In debug I have found that the macro takes 10 minutes plus whenever it hits any of the following code:
Code:
With Application
.Calculation = xlAutomatic
.MaxChange = 0.001
End With
ActiveWorkBook.PrecisionAsDisplayed = False
It goes slow on each of the three 'lines' so it seems that it is actually doing an auto calc each time!
Is there some configuration I can do to prevent this? Setting auto calc to Manual didn't work and anyway I loose things, like data validation, when I save it in Excel 2010.
View 4 Replies
View Related
May 15, 2007
I am using a macro that automatically updates data obtained through a DDE link at 5 second intervals. My code is based off of the article "Automatically Run Macros at a Set Time or Date" found on the Ozgrid FAQs found here: http://www.ozgrid.com/Excel/run-macro-on-time.htm
However, I have this macro execute when I activate a Form Button, not when the workbook opens. So far, this macro works perfectly, and I have no problems. Although, I'd also like to include a Form button to STOP the macro from automatically running if the user chose to do so. How exactly would I go about making this STOP button?
View 4 Replies
View Related
Jan 25, 2014
I have a spreadsheet and am in the middle of creating a userform to display the results of data over a given period (period selected by user).
In that userform I would like to display a graph (the graph will be created behind the scene once the date range has been selected). Is there any way that the graph can be displayed on the userform? If so, how?
View 1 Replies
View Related
Jan 29, 2009
I have built a UserForm (Excel 2003) that looks up a Row dependant on Criteria and displays the values on the User Form.
View 9 Replies
View Related
Apr 6, 2013
I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.
View 2 Replies
View Related
Dec 10, 2009
I have a combobox on a userform that I have set the columncount to 3, so it displays data from columns A, B, and C when the combobox dropdown is used. However, once someone makes a selection from the dropdown, only the item from the first column is displayed in the combobox. Is there a way for me to show the info from all 3 columns once a selection is made?
View 8 Replies
View Related