Save And Close File If There Is Text In Cell Range
Nov 12, 2012
I do have the below code to safe a file and close it:
Sub Save_Close()
'
' Save_Close Macro
'
'
ActiveWorkbook.Save
Application.Quit
End Sub
I would like to do additionally something else. I need a macro to do the above, but it should first check if cells A2:C9 do contain text. The text could be anything.
If there is text in ALL the cells, then the macro should save and close the file. If there is text missing in at least one of the cells, a message box should appear saying 'Please fill out all cells'.
View 3 Replies
ADVERTISEMENT
Jul 19, 2013
I am trying to write the code to;
1) change to a different sheet
2) select a specific cell range
3) save that range as a text / xml file with a filename derived from a cell outside the given range
Here is where I have got to so far, but it fails
Private Sub Export_Click()
Sheets("Parsed Data").Select
ThisFile = Range("B1").Value
ActiveWindow.SmallScroll Down:=-15
Range("A1:A41").Copy
SaveAs Filename:=ThisFile, _
FileFormat:=xlTextMSDOS
Application.WindowState = xlMinimized
End Sub
View 2 Replies
View Related
Jun 7, 2013
i would like my sheet to save and close if left inactive after 10 mins, code would be nice
View 2 Replies
View Related
Jun 13, 2009
I am trying to fix is that I have two computers networked together both with multiple users all with access to the report form that I am using which is in the shared file. If I have been working on it (I am still trying to do improvements when I have time), and I have to leave for a fire or forget to close the report, no one can access it other than with read-only.
My idea was to run some type of code that either when the screen saver comes on or after so much time with no activity, it would close and save the file with a new file name(just in case I don't want the changes that I have made in the code or something).
View 3 Replies
View Related
Jan 24, 2014
At work we use a spreedsheet to control our holidays. The problem we are having is the file is stored on a network and some people are opening the file and not closeing it once done with, this is locking out others from using it.
Is there any VBA code that will close the file, if not used in say 5 mins
View 3 Replies
View Related
Feb 3, 2014
I have a spreadsheet that I drop data into and it updates a set range on the sheet. I than have to copy that range in to notepad and save it under the name "Hourly Team Stats - 2-2-14" on our companies shared drive. If the file is already there, I have to add the data to that file rather than create a new one.
I am looking for macro that check to see if the file has already been created, if not create a new one. If it does exist, add the range to the file. If you need the path its F:Team Stats.
View 6 Replies
View Related
Mar 4, 2010
I also use VBA in a terminal emulation program that I use the following command to 'screen scrape' the current display memory and quickly Save it to a .txt file:
.SaveDisplayMemory "C:File1.txt", rcOverwrite
What I want to do in Excel is, Copy the current selected Range() and Save it to a .txt file.
I know how Save the current Sheet to a .txt file, but can't figure out how to Save just a Range() of cells.
View 9 Replies
View Related
Sep 18, 2009
I have an existing spreadsheet with a column of strings (actually VIN numbers). These numbers correllate to a bunch of text files, that can exist in one of three folders (UsernameDesktop1, 2, or 3) on my desktop. What I need the macro to do is:
1) get the filename from A2 (A1 is a heading row)
2) Find the appropriate text file in one of the three folders
3) Put the folder name into I2
4) Scan the text file for some strings, and copy some data that follows those strings into J2:O2 (I can handle programming this)
5) Close the text file
6) repeat above for the remainder of filenames (about 1800 files)
View 3 Replies
View Related
Aug 16, 2008
I need to open about 2000 documents one at a time, and save them with a different name.
they are a mix of word documents, PDFs and .jpg pictures.
some VBA like:
Open.file strPath & nextfile
where strpath = C:Temp
and nextfile = picture01.jpg
What should the line be? or is it more complex than a single line ?
View 9 Replies
View Related
Feb 21, 2008
- I have excel file with data I need
- I have fixed txt(html) template that i need to integrate Excel information into
- Final result that I want to achieve is saved .txt(html) file with combination of fixed information (text) and data from excel cells.
I need to writing a VBA code for each of above (integrating text & cells, saving results as text)
View 5 Replies
View Related
Dec 3, 2007
Could any Excel wiz out there tell me whether the following is possible, and if so what would be the VB code to do it?
I would like a macro that will save the contents of cell A2 in a text file, with file name from cell A1, then move the cursor down to the next row, and repeat the process until reaching the last row of data.
The end result would be a stack of text files, each containing the data from a single cell in the spreadsheet.
e.g.
001.txt (containing the contents of cell A2)
002.txt (containing the contents of cell B2)
003.txt (containing the contents of cell C2)
...etc.
This is for a multi lingual dictionary so the text files would have to be unicode as well.
View 12 Replies
View Related
Oct 28, 2012
By using a macro is it possible to save just a cell value as a txt file?
This is part of a Forex system I am building using excel.
There will be 28 pairs and a total of 168 buttons. Each button will be assigned a cell which will hold the information for that trade.
I am looking for a macro that will save just the cell value as trade.txt
View 4 Replies
View Related
Dec 29, 2006
I am trying to inch my way forward to writing a macro that will read in an external CSV file into a sheet (my next task will be to spread the date between multiple sheets based on regions). My first attempt at code is the following
Sub read_csv()
Dim strLine As String
Dim i As Integer
Dim filename As String
Dim ans As String
filename = "C:Documents and SettingsMichaelMina dokumentMina datakällorD123905.csv"
Open filename For Input As #1
i = 1
While Not EOF(1) And i < 10
Line Input #1, sLine
ans = MsgBox(sLine, vbOK, "hello there")
i = i + 1
Wend
' Close filename
End Sub
A couple of problems arise. When I debug the code, if I remove the comment on the close filename, the debugger complains with error 13 (incompatible types). If I comment the line and try and run the code twice in a row, I get a complaint about error 55 - file already open. I'm guessing that the close filename is the correct syntax - if it isn't, what should it be??
View 5 Replies
View Related
Aug 31, 2009
I have a summary file (I'll call it File A) from which a macro is run. It opens other files, finds a "total line" then copies it into File A. Then it closes that file, opens another, and repeats the process. The macro works fine for most of the files it opens and closes, but on some of them, upon the close command, a dialog box pops up asking "Do you want to save the changes you made to "File B.xls"?
I'm not sure why this comes up as there were no changes made. Cells were only copied and pasted into another file. Is there a way to stop this annoying box from popping up? It slows down the macro by waiting for human input. here is my
View 4 Replies
View Related
Mar 11, 2014
I call it from a macro. It is supposed to write some temporary files, and close them in the end, and delete them. Sometimes, the dll can't close properly, and the text files remain open.
With error treatment in my macro, I can continue execution, but i need to delete that files.
Since the dll DOES NOT CLOSE the files, i'm not able to delete them in my macro.
I need some way to close that files, in order to delete them.
When I use GetFile to reference the file, it remains as "File", which does not accept "Close" method. I can reference the file with myfile.OpenAsTextStream, but this way it seems to me that the file is opened again, and the "Close" method does not work either, with the file defined as a TextStream object.
If I close excel, I'm able to delete those files, but that's not the way I want. Since IT'S OPEN IN EXCEL PROCESS, I imagine there's some way to close it.
View 1 Replies
View Related
Dec 20, 2009
How to save a file, with file- name. but the directory is to be read in worksheet "towns" in Cell1 (brussels) and filename in worksheet "names" in cell B2 (i.e. winter), so it saves to c:russelswinter.txt as a wordpad or kladblok txt file, that keeps a number, so each time we push a button "go back from worksheet names to worksheet towns" the "number" that is saved in the txt document goes up by value +1. In Flemisch, the "old" code goes as follows, and saves the number in the txt file Factuurnummer7.txt. But I want that the file name (here: FactuurNummer7) can be a variable text issue, which has to be read - as already noticed - in cell B2 (with the word WINTER). So the are 2 worksheets: towns, ans names
pad$ = Application.DefaultFilePath
'controle = Dir(pad$ + "FactuurNummer7.txt")
'If controle = "" Then GoTo EerstAanmaken
'Open pad$ + "Factuurnummer7.txt" For Input As #10
'Input #10, Nummer1
'Close #10......................
View 2 Replies
View Related
Nov 2, 2009
Each of the worksheets in my model use A1 as a control cell for any errors and inconsistencies. My aim is to disable save and close commands in case A1 is not equal to 0 in any of the worksheets.
The code I currently use for that purpose is as follows.
View 2 Replies
View Related
May 14, 2014
I have alot of project folders on my harddrive.
All in format: I:/12345-costumer-projectname/
The five digits are unique for each project.
I make calculations for these projects using an excel file. In this excel I also type the projectnumber (cell J2)
Now i would like to make a button. When pressed, it checks the projectnumber cell J2, looksup the corresponding folder and saves the excelfile in PDF format in this folder.
I have found macro to find files in folders, but none which do the above.
View 4 Replies
View Related
Feb 11, 2013
Using the developer tab I inserted an Active X combo box. Under properties I referenced a 'linked cell' that I want the data to appear in. This box works great as long as I keep the sheet open. Once I save and close the workbook and re-open, that reference is lost. It shows #REF! in that field. Why does it lose the reference? I have tried to reference a cell on the same sheet as well as a cell in a different sheet and it keeps the sheet name but not the individual cell.
View 13 Replies
View Related
Sep 28, 2008
i have a main.xls file and two data file dat1.xls and dat2.xls
mail named file have ar - br- cr- dr- er -fr sheets
dat1 named file have ar-br-cr sheets
dat2 named file have dr-er-fr sheets
and all this files data source is
colomn source a - fd
row source 29-4000
i want to make two commandbutton to main file first for dat1 second for dat2 file and i need a code to use at this buttons to make
when dat1 and dat2 close
main file user when click first button
copy dat1 file ar sheet colomn source a - fd row source 29-4000 cells to main file ar sheet colomn source a - fd row source 29-4000 cells
copy dat1 file br sheet colomn source a - fd row source 29-4000 cells to main file br sheet colomn source a - fd row source 29-4000 cells
copy dat1 file cr sheet colomn source a - fd row source 29-4000 cells to main file cr sheet colomn source a - fd row source 29-4000 cells
View 9 Replies
View Related
May 30, 2008
I am copying a sheet out to a new workbook in order to save as a CSV file. I was wondering if there was a better way of doing this than the code below which uses ActiveWorkbook to determine the newly copied sheet.
Sub test()
Dim OutputFile As Workbook, InputFile As Workbook
Dim sDD As Worksheet
Set InputFile = Workbooks.Open("H:TestTestInput.xls")
Set sDD = InputFile.Worksheets("Data Dump")
sDD.Copy
Set OutputFile = ActiveWorkbook
OutputFile.SaveAs Filename:="H:TestTestOutput.csv", FileFormat:=xlCSV
End Sub..................
View 2 Replies
View Related
Apr 30, 2014
I'm looking to add a bit of code in to a command button that saves the range A1:I51 (on the active sheet) as a PDF file.
The file wants to be saved in this directory: C:UsersAdamDesktop EST fOLDER
The filename wants to be: "Invoice " & the cell value of I12, i.e. "Invoice 134".
View 2 Replies
View Related
Jul 10, 2014
I have a Workbook that already has a macro in it that will generate multiple sheets based on certain criteria.
For each of these newly generated sheets (numbered 1-6 in the attached example), I need to be able save each of them to a PDF file based on a unique name contained in a certain cell (in this case, each named is referenced in cell Q1 of each sheet). As such, I should end up with 6 pdfs based on the attached sample files.
The PDFs would ideally need to be landscaped and should be just 1 page per sheet.
In my attached sample workbook, you'll notice that I have a "PracticePrint" macro that doesn't quite get the job done. One other criteria involves not printing any sheet with the characters "1010" in it (my PracticePrint macro is setup to do that, but it fails to do much else).
View 1 Replies
View Related
Jan 24, 2012
I am trrying to save an Excel 2003 file as text. This is how the cells appear in Excel.
:20:CBR:32A:040112GBP4000,00:50a:/To Be Pre-Populated:57a://SC112233:59:/93442134:70:
Each is fine except
:32A:040112GBP4000,00
which appears as
":32A:040112GBP4000,00"
These speech marks are not wanted but I can't find a save format that does not insert them.
View 1 Replies
View Related
May 14, 2008
I have a folder that has a bunch of text files in it with numeric names (they are store numbers 2, 3, 165, 188, etc...). I need to open those files (in excel), run a macro on them (this portion of the macro has already been created), and then save them with the same name as the txt file but in an xls format and close. It would be great to have the whole folder process automatically but I am willing to start small. Further, I'd like it to not ask for a filename, and I don't want to see the SaveAs dialog box. So far I have been able to get the macro to run through the my processing of the text file all the way to the SaveAs portion, but the code in my macro opens the SaveAs box and puts the filename of the txt file in the file name box in quotes with the txt extension. Below is the code.
Sub Macro3()
sFile = Application. GetOpenFilename( _
fileFilter:="Text Files (*.txt), *.txt", FilterIndex:=1, _
Title:="Open Workbook")
Workbooks.OpenText Filename:= _
sFile, Origin:= _
xlWindows, StartRow:=1, DataType:=xlFixedWidth, FieldInfo:= Array(Array(0, _
1), Array(5, 1), Array(26, 1), Array(35, 1), Array(39, 1), Array(46, 1), Array(51, 1), Array _
(58, 1), Array(75, 1), Array(87, 1), Array(91, 1), Array(97, 1), Array(99, 1), Array(111, 1) _.....................
View 5 Replies
View Related
Jun 5, 2014
Is there any way to write a macro that will take a specific sheet in a workbook and save it as a tab-delimited text file?
View 1 Replies
View Related
Apr 21, 2008
I have an xl doc in which one of the sheet's column A changes value every 1 hour...
What I would like to know is.. if there is a method in which i can copy these values from column A to a text file every hour...
The range of cells containing values in Column A also varies every hour.
Also, the old values in the text file needs to get deleted before the new values are updated every hour.
View 14 Replies
View Related
Jan 27, 2009
find attached an example of the spreadsheet I am working with. Please bear in mind that this is a much simplified version of the version I am currently working on (which needs to have 1000 lines). What I am trying to achieve is allow my team to enter rows of data into the spreadsheet in a format that they will be familiar with - then hit the button on the sheet which will then take a copy of the second sheet (which looks up against the first) and spit it out in a .txt file ready to be uploaded into our computer system.
The main priority that I need to fix is that when the .txt file is opened in notepad it contains a huge amount of blank data rows at the bottom - I assume that it is taking accross all 65536 lines into the .txt where I only want the rows that have data in them in the .txt. At present our computer system will not accept the .txt due to all the blank rows (its limit is 1000 lines).
View 5 Replies
View Related
Sep 5, 2006
I'm trying to create a sub that will save my worksheet to a tab delimited text file anytime there is a change in the worsheet data (all cells are linked to cells in other workbooks). I've figured out the command to save the file
ActiveWorkbook.SaveAs Filename:= _
"C:Documents and SettingsChrisMy DocumentsBook1.txt", FileFormat:=xlText _
, CreateBackup:=False
but I'm not sure how to get a sub routine to start running when the file opens and to have it run continuously while open. I've found the command:
Application.Volatile
that will flag when any cells in my range are recomputed and run a function, but functions don't allow me to save the file.
View 4 Replies
View Related
Jun 29, 2007
What I am looking to do is create a Dos.bat file to be run in the middle of the night that opens Excel. From there I will need Excel to open a .txt file from a specific folder, format the file, then re-save as an .xls file.
Each of the .txt files in the specific folder is named like the following:
BCKLOG_062807
BCKLOG_062707
and a new file is being generated to the folder each night (with the new date in the filename).
Is there a way I can use the macro to loop through only the new files being placed in the folder, since the old files will already have their .xls counterpart saved ???
If this is not a clear enough description, please let me know and I will attempt to explain better.
View 3 Replies
View Related
