I need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View RelatedI have a range of data in columns A2 to Mx. The length of the columns varies, and all cells are not always populated. I want to be able to select the entire range, no matter what its length, no matter how many cells are populated (as both of these will vary on each tab) However, I do not want to select A1 to M1 as this is column headers which need to be excluded from the data for compliation purposes.
View 9 Replies View RelatedIs anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
Hope someone can help with this - Please can I have some VB code that will select all rows in columns H2:M2, when I don't know each time where the last row will be? I'm guessing this is a dynamic range, but not sure!
View 8 Replies View RelatedThis will be an easy on for you seasoned programmers. I want to find the last used cell in a column, and then select an offset range based on the location of that cell. For example, in the attached workbook, I have a button at the top that activates a macro to add a new week to my time sheet. This simply copies the contents of the current week, and adds it at the bottom.
What I would like to do next is clear the data from the newly added cells, leaving the formulas in columns A, B, C, J and K. In the attached example, I have just added Week 3. I would now want to locate the last used cell in Column C, (C24), then offset from that cell to select the range D18:I24, and clear the contents of those cells.
I am looking to use dynamic ranges for a project and have not used them before so forgive me if the answer to this is obvious.
After declaring a dynamic range
Name = Upload
=OFFSET(Sheet1!$A$1,0,0,COUNT(Sheet1!$A:$A),4)
I have added additional data at the end (Row24). I wish to then check that the range has expanded but cannot find a way to select it.
Ctrl + F3 shows the defined name 'Upload' but:-
F5 does not show the range 'Upload'
The drop down box at the left of the formula bar doesn't show it.
How do I select range 'Upload' to simply show the dynamism works, without using VBA?
Example sheet attached.
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
Im sorting a dynamic range as mentioned in this Sorting a Named Range. My range is called drWarningTypes and is defined as:
=OFFSET(DataSource!$A$2,0,0, COUNTA(DataSource!$A:$A)-1,1)
When there is only one cell in the range, then running the following sort function includes A1 also in the search (and also adjoining columns).....
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
I have a row of dates going across in row 2, and random values going across in row 3 from D3 onwards. I want to return the average of values in row 3 until the third last non-blank cell in row 2 and do a similar thing for maximum row but just for the last 30 cells from the right (so latest 30 days). I have attached screenshot of part of spreadsheet for better illustration.
Capture.PNG
In my macro I can come up with a range for both, as below. Both lines of macro below select the correct range I am looking for.
[Code] .....
However when I try to apply them into an average/maximum function they returned an error 1004, Application defined or object define error:
[Code] .....
When I put it as following it returned me the value of Cells (3, 4) (Cell D3) instead of the average:
[Code] .....
Attached File : Capture.PNG
I seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
I have a sheet containing 2 lists of categories for income and expenses. These lists are named inc and exp, respectively, and are contained in a sheet called "Lists." They are dynamic ranges, meaning every time a value is added, the named range adjusts itself to include the new value(s). [=OFFSET(Lists!$A$1,0,0,COUNTA(Lists!$A:$A),1)]
I have 2 tables summarizing 12 months of data. The tables use sumif to find all occurrences of each category and sum them. There's 1 table for income, 1 for expenses. Each is a 2 column table, with all the categories for income in column A and their total for 12 months in column B. Same for Expenses in D & E.
To populate the categories in column A & D, I am currently using the simple =Lists!A1 =Lists!A2 (inc range), =Lists!B1 =Lists!B2 (exp range) and so on... the problem is when a value is added to either list, while the named range adjusts, I have to manually drag the formulas in Column A & B down 1 more cell to include the new value.
How can I use VBA to look for the inc and exp ranges (which will change in size), then populate each table with the most recent categories?
I have a function which copy pastes data into a sheet based on a filter criteria. It is also pasted in a specific layout(shown below) starting from Cell A1 in the top left corner. Therefore the destination sheet could have a different number of rows with values each time.
What I would like to do is count the sum of 'Values' in the destination sheet, and add a total below it.
For example, the [=TOTAL] cell is where I want the total to appear. Below the answer would be 26. But say if Peter wasnt in the record, the formula should still work in identifying the Total as 20.
Title:
Sheridan
Owner
Petrov G
[Code]....
Is there a way I can achieve the desired result? I figured I had to somehow count from the first record by Peter, to the last one, whichever that may be.
I am having the same problem as this thread Dynamic Ranges with blank cells.
I've recently been pointed in the direction of dynamic ranges (named ranges that use OFFSET and COUNTA to expand to cover the whole of a list, even if the number of rows used is frequently changed).
They seem to have a big drawback, in that the range will not go to the bottom of the list if the list has blank cells in (because the COUNTA for the column of interest does not equal the number of rows in the list).
A typical named range might look like this:
=OFFSET(Sheet1!$A$2,0,0,COUNTA(Sheet1!$A$2:$A$25),1)
I tried to post in it but it's too old.
I have been to the link posted in that thread about advanced dynamic named ranges but inserting a row with numbers in it and then hiding it is not suitable for me as i deal with other peoples spreadsheets so need to always be working with the Active Sheet.
Why the following code gives me an error. I have so much trouble with ranges, I use the syntax as it is prescribed. Here is the code. I will include some code lines underneath since I imagine they wont work either.
[Code] .....
I eventually will be turning the range statements into copy and paste instead of select. At the moment I am using select to make sure the proper cells are being selected.
I am also attaching my complete workbook as well.
Attached File : Therapy Tracker - Tester V2.3 -deleted logo.xlsm
How can I select a range of cells dynamically, not know how many cells down for two columns that I will need to select, there will be a blank cell at the end of the needed range.
View 9 Replies View RelatedI need to find average of the values , the count of the cells will be dynamic (may be 5 or even 200).
View 2 Replies View RelatedI have a range of cells with data from one day. This range is "C36:K63"
Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.
Thus, day two should copy "C36:K63" into a new range: "C65:K92"
As you can tell, the rows will change each day, but the columns will always remain the same.
How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?
i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.
I've normally just dynamically selected a range using the xldown feature but because this row contains formula it goes always down to the bottom of the formula instead of the last cell which isn't blank.
How would i go about generating this dynamic range that stops at the first cell that contains no value (but has a formula)? Perhaps a do while loop which looped down until it hit the first blank and then assigned the cells it had looped through as the range?
I need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
=========================
Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)
If Not aCell Is Nothing Then
aCell.Offset(1, 0).Select
========================================
That's how I select the first cell in the range. Not sure how to select the whole range and name it ..
ActiveCell.End(1xDown) ?
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
I'm looking for a macro that only selects the unprotected cells in a range. So that I can copy a formula in these cells.
I found the below macro on the web but it will select all the unprotected cells in the worksheet. I guess this one can easily be adjusted to only select the cells in a range, but I do not know how to do this.
Code:
Sub SelectUnlockedCells()
Dim WorkRange As Range
Dim FoundCells As Range
Dim Cell As Range
Set WorkRange = ActiveSheet.UsedRange
For Each Cell In WorkRange
If Cell.Locked = False Then
[Code]...
I have come up with this bit of code by joining in two separate sets of code that I used earlier. What I want to do is this, for a given range I need to find each cell that has a comma and once that cell is found a formula has to be applied in a cell few columns to the left.. Here is the code that I am using..
Code:
Sub Macro8()
Dim i As Long
For i = 1 To 1000
[Code]...
The sheet can be downloaded from here, I want column H to be (Col B / Col C) whenever Col A has a cell with comma in it. For this sheet col H needs to be populated 3 in places. The code above does it only for first instance.
I am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 Replies View RelatedI have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
I'm trying to create a macro for another user that she will use repeatedly for many different spreadsheets. Each spreadsheet will have a varying amount of rows that will need to be exported to a different file. She will highlight the cells she wants exported and then hit a button to do so. My problem is this: how do I code a macro so that it will know which cell is the beginning of her selection and which is the end?
View 2 Replies View RelatedAttached is a spreadsheet I am working on that has a series of graphs with defined dynamic ranges. I am having 2 separate issues on 2 different tabs.
1) Ranges named AirRecBra4 (and Bra10); AirComBra4 (and Bra10); AirRemBra4 (and Bra10) are not pulling in data from the correct data points. Instead of using the last 26 data point, they are currently beginning at the top of the column (currently cells 11 to 36 is their respective columns). The formulas are copy and pasted from working offset ranges in the same tab but are reading differently.
2) On the last 6 tabs beginning with Stn Backlog, I want to have defined formulas beginning in cell B119 and continuing downward to at least F200. However, when I add the formulas, the offset reads the formulas as being data and adjusts for that. I do not know how to adjust the dynamic range to ignore formulas in blank cells.
Global Demand-Capacity Management_working (version 3).xlsm
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have a sheet that has 65000 rows and 3 columns, I need to load this sheet into a system that will only deal with 25000 rows at a time. How do you do a huge range select with Excel?
I need to select range a1:c24999 cut it out and paste it into another sheet. I have about 75 of these these sheets to do is there a way with a formula, a script or? to do these huge selects?
I am a Mac user, running MS office 2008 for Macintosh.
