Dynamic Range To Select Only Visible Columns?

May 6, 2014

I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).

There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.

This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.

Code i currently have is:

[Code] .......

I just need it to now go across 10 visible columns and set as a single print area.

View 8 Replies

How To Select A Dynamic (?) Range?

Dec 11, 2008

Hope someone can help with this - Please can I have some VB code that will select all rows in columns H2:M2, when I don't know each time where the last row will be? I'm guessing this is a dynamic range, but not sure!

View 8 Replies View Related

Select A Dynamic Range

Jan 9, 2009

This will be an easy on for you seasoned programmers. I want to find the last used cell in a column, and then select an offset range based on the location of that cell. For example, in the attached workbook, I have a button at the top that activates a macro to add a new week to my time sheet. This simply copies the contents of the current week, and adds it at the bottom.

What I would like to do next is clear the data from the newly added cells, leaving the formulas in columns A, B, C, J and K. In the attached example, I have just added Week 3. I would now want to locate the last used cell in Column C, (C24), then offset from that cell to select the range D18:I24, and clear the contents of those cells.

View 4 Replies View Related

Go To & Select Dynamic Range

Sep 20, 2007

I am looking to use dynamic ranges for a project and have not used them before so forgive me if the answer to this is obvious.

After declaring a dynamic range

Name = Upload
=OFFSET(Sheet1!$A$1,0,0,COUNT(Sheet1!$A:$A),4)

I have added additional data at the end (Row24). I wish to then check that the range has expanded but cannot find a way to select it.

Ctrl + F3 shows the defined name 'Upload' but:-
F5 does not show the range 'Upload'
The drop down box at the left of the formula bar doesn't show it.

How do I select range 'Upload' to simply show the dynamism works, without using VBA?

Example sheet attached.

View 4 Replies View Related

Read Only Visible Columns From A Range

Jun 17, 2009

I do hav a sheet in which i do hav some column;s n data

Worktype
Metrics
April
May
June

in work type few rows are hidden which i don't need what i need is i want to populate only comman metrics in other range named metrics i had build a macro for this and that's working fine but the problem is it also reads metrics from hidden rows too. i had tried a loop in which i had placed as hidden column property condition.

View 4 Replies View Related

Select Dynamic Range Of Cells

Feb 9, 2008

I need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected

View 3 Replies View Related

Select Dynamic Range Based On Non-empty Cells

Aug 7, 2009

I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.

View 2 Replies View Related

Select All Cells In Semi-populated Dynamic Range

Aug 16, 2006

I have a range of data in columns A2 to Mx. The length of the columns varies, and all cells are not always populated. I want to be able to select the entire range, no matter what its length, no matter how many cells are populated (as both of these will vary on each tab) However, I do not want to select A1 to M1 as this is column headers which need to be excluded from the data for compliation purposes.

View 9 Replies View Related

Resize Visible Rows Based Only On Visible Columns Text

Apr 22, 2009

Need to correct code to resize all visible rows on a sheet based only on the text in the visible columns. I have tried the below code but when it resizes it is using the largest amount of text in the rows including that in the hidden columns.

View 3 Replies View Related

Dynamic Named Range - Select Only Cells With Numerical Values

Jul 21, 2006

Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?

I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.

View 9 Replies View Related

Name A Dynamic Range With 2 Columns

Jun 28, 2014

I have data in 2 columns on which I need to do vlookup. This range for vlookup increases. I want to name this dynamic range. How do I do it?

View 1 Replies View Related

Dynamic Range With 2 Columns

Nov 11, 2009

I'm trying to name a dynamic range for A2:B10000.... I know how to use the OFFSET function but was wondering to do it using the INDEX function

Both column will always have the same number of used rows.

Another question:

If I have dates in Column A, and values in Column B....what formula do I need to get me the last value (last row,most recent Date)

View 2 Replies View Related

Dynamic Range. Rows & Columns

Dec 7, 2006

create a Dynamic Named Range for Pivot Tables

the pivote table takes data from A1 to Kx

x is the last row of column K that is not 'blank' ( whenever I insert a new row),

I already know how to define a zone but not know how to to make it "dynamic"

View 5 Replies View Related

Dynamic Range: Text To Columns

Dec 20, 2006

How would I modify this macro to handle a Dynamic Named Range In the example below A27 is the last row in my data set, but its last row number is dynamic.

I'm using this code just after finding the last row in the dataset, but found it breaks if the last row doesn't fall in the A27 range.

I find the last row prior to executing the TextToColumns code.

Range("A65536").End(xlUp).Select

Sub TextToColumns()
Selection.TextToColumns Destination:=Range("A27"), DataType:=xlFixedWidth, _
FieldInfo:= Array(Array(0, 1), Array(3, 1)), TrailingMinusNumbers:=True
End Sub

View 4 Replies View Related

Dynamic Range Of Columns With Fixed Rows

Jan 5, 2009

I am still trying to develop a macro that will copy and paste a set of formulas into a dynamic destination range. I have included a worksheet that shows what I am trying to do. Basically when using AutoFill I need the columns of the destination range to be dynamic based on the number of rows in another sheet.

View 13 Replies View Related

Select Range Of Columns

Jun 26, 2009

I'm in the midst of preparing a Year-To-Date (YTD) simple financial report in MS Excel.

Firstly:
I allow user to enter a number in cell A2.

Secondly:
Cells from A4 - L4 are linked from Sheet1. Cell M4 will give sum of A4:L4. Users are not allowed to change data in cells from A4 - L4. Users are only required to enter a number between 1 to 12 in cell A2. Upon update cell A2, the VBA shall sum the number of columns as entered in cell A2.

For example, if user enter 3 in cell A2 then cell M4 must give sum of A4:C4. If user enter 8 in cell A2 then cell M4 must give sum of A4:H4.

View 9 Replies View Related

How To Select Range And Skip Over Hidden Columns

May 1, 2014

I have below a code that is selecting from A11 down as far as there is data and across a certain number of columns then sets a print area.

Currently the columns go A, B, JW, JX, JY, JZ, KA, KB as C through to JV are hidden. I have tried to offset the columns by 7 to see if it will select A-KB but it is selecting cells that are hidden and only selecting A-G. I need it to go past the hidden columns. Here is the code:

[Code] ......

Could I also get a code to go from A10 and move over to KB and create a range from there e.g. KB-KJ and last row from there?

View 10 Replies View Related

Select Range Of Columns And Unhide Any That Are Hidden

Dec 10, 2013

I have a macro that allows me to select a range of columns and unhide any that are hidden. I am on the sheet "Employees", but the action happens on the sheet "Enter". I can run this macro when I am on "Employees" and jumps top "Enter" and works exactly as I want it to.

Code:
Sheets("Enter").Select
Columns("B:T").Select
Selection.EntireColumn.Hidden = False
Range("M8") = Sheets("Employees").Range("B5")
Range("I7").Select

But when I try to run it as part of another macro that begins on "Employees", I get "Run-time error '1004': Select method of Range class failed", and Columns("B:T") is highlighted.

View 4 Replies View Related

Excel Function To Select Two Columns Based On Range?

Jul 30, 2014

Function to select two columns based on the header and the variable given.

Sample excel file attached for your ref.

Excel sample.JPG

Find the excel file in which I am looking for an formula which will look up variable in Col A for Eg USD and search the same in Row 1 and then will select COL D:E and so forth for other currency.

View 4 Replies View Related

Select Range Of Contents From Column Which Lies In Between Other Columns

Mar 24, 2013

I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.

1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.

How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.

View 4 Replies View Related

VBA To Select The Previous Visible Cell?

Aug 5, 2014

[Code] ......

What is wrong with above code? I am not able to select previous A15 cell, when macro is selected from C1 cell ( B row is filtered to hide ).

View 1 Replies View Related

LastRow Needs To Select Next VISIBLE Row (not Hidden Row)

Jul 19, 2007

I'm having a problem moving the cell cursor 2 rows down once I find my LastRow (see LastRow code below). My problem is I need to move down 2 VISIBLE Rows down and I'm running into it moving 2 Rows down whether they are Visible or Hidden? If Row 50 is my LastRow, and I have it move 2 rows down, if Row 52 is Hidden, it still moves to Row 52 which can't be seen by the user after I do my stuff to that row? I can't unhide any hidden rows for other reasons. Is there a way to have the cursor move down 2 VISIBLE Rows instead of 2 Rows regardless?

The code I use to select the LastRow is:

LastRow = Cells(4000, 8).End(xlUp).Row
I move down 2 more rows using:

Cells(LastRow + 2, 8).Select 'Then I do some stuff here for the user, so it can't be a hidden row

View 9 Replies View Related

Check For & Select Visible Cells

Jun 26, 2008

I have the following code in my VBA

Selection.SpecialCells(xlCellTypeVisible).Select

This throws up error when the selection does not has any visible cells. Is there a way to check the selection for visible cells before executing this command.

View 2 Replies View Related

Select Cell Content From Visible Rows.

Mar 15, 2009

I have a worksheet whereby many of the rows are hidden. These rows were initialy hidden by means of scipts ( I have numerous scripts to hide data under various criteria) eg: Scripts which hide rows based on cell count, cell color, cell data information etc...

Now that I am able to veiw only the information that i want to see.. is it possible to create a script which selects cells only from rows which are visible? I have created a Named range begining from E:12 to G:500 called "Select_EFG"

Uing the example below, how could I select the cell data from the visible rows (12, 30, 34, 35, 50 etc... up to row 500.) from this Named Range (columns E:12, G:500) .... and paste this information in Sheet 2 Row5 columnC

........A,B,C,D,E,F,G,
Row
12
30
34
35
50
57
59
100
140
400
490
500

View 2 Replies View Related

Select Visible Cells Button Not Working

Jul 14, 2008

I have a worksheet where I first filtered, then hid some columns. Used to be that I just highlighted the area I wanted copied, clicked the select visible cells button that I put on my toolbar, ctrl c and ctrl v into a new worksheet and only the visible cells would be copied. Now the button isn't working because when I ctrl v into the new worksheet, it shows the hidden columns also.

View 9 Replies View Related

Select The Visible Cells And Count Down 50 Rows In Column

Oct 14, 2008

I would like to select the visible cells, and then count down 50 rows in column A - is this possible?

View 9 Replies View Related

Range.select Error (SELECT METHOD OR RANGE CLASS FAILED)

Jul 23, 2008

I have this:

Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED

View 9 Replies View Related

How To Name A Dynamic Range & Make A Validation List (of 2 Dynamic Ranges)

Dec 22, 2009

I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.

Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?

i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both

View 9 Replies View Related

Detect Largest Range Of Visible Cells In Filtered Range

Jul 3, 2014

I would like to be able to find the largest visible area of continuous rows in a filtered table. I know one possible way would be to loop through visible cells using the "xlCellTypeVisible" property and count cells in each visible area. However, the data is consisted of tens and sometimes hundreds of thousands of rows so I was wondering if there is a faster, more efficient way to do this.