Macro That Will Select A Range Of Cells In A Given Row
May 30, 2007I am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 RepliesI am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 RepliesI seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
Why the following code gives me an error. I have so much trouble with ranges, I use the syntax as it is prescribed. Here is the code. I will include some code lines underneath since I imagine they wont work either.
[Code] .....
I eventually will be turning the range statements into copy and paste instead of select. At the moment I am using select to make sure the proper cells are being selected.
I am also attaching my complete workbook as well.
Attached File : Therapy Tracker - Tester V2.3 -deleted logo.xlsm‎
How can I select a range of cells dynamically, not know how many cells down for two columns that I will need to select, there will be a blank cell at the end of the needed range.
View 9 Replies View Relatedrange("A1").select
can I replace A1 with l where
l = worksheets("List").cells(3,2)
?
it doesnt like it, is there a better solution?
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
I'm looking for a macro that only selects the unprotected cells in a range. So that I can copy a formula in these cells.
I found the below macro on the web but it will select all the unprotected cells in the worksheet. I guess this one can easily be adjusted to only select the cells in a range, but I do not know how to do this.
Code:
Sub SelectUnlockedCells()
Dim WorkRange As Range
Dim FoundCells As Range
Dim Cell As Range
Set WorkRange = ActiveSheet.UsedRange
For Each Cell In WorkRange
If Cell.Locked = False Then
[Code]...
I have come up with this bit of code by joining in two separate sets of code that I used earlier. What I want to do is this, for a given range I need to find each cell that has a comma and once that cell is found a formula has to be applied in a cell few columns to the left.. Here is the code that I am using..
Code:
Sub Macro8()
Dim i As Long
For i = 1 To 1000
[Code]...
The sheet can be downloaded from here, I want column H to be (Col B / Col C) whenever Col A has a cell with comma in it. For this sheet col H needs to be populated 3 in places. The code above does it only for first instance.
I need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies View RelatedI have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
I'm trying to create a macro for another user that she will use repeatedly for many different spreadsheets. Each spreadsheet will have a varying amount of rows that will need to be exported to a different file. She will highlight the cells she wants exported and then hit a button to do so. My problem is this: how do I code a macro so that it will know which cell is the beginning of her selection and which is the end?
View 2 Replies View RelatedI'm in charge of taking a report; streamlining its functions; and automating future reporting.
I'm using a database and some of the reporting function Access has. For another variation I'm forced to export the query to excel and transpose the vertical layout horizontally.
I'm making the entire process automated via a macro. The code is too long to post in its entirety but here is an example of what I'm trying to accomplish:
I have a protected worksheet with a mixture of locked and unlocked cells, and I'd like to provide an option to allow the user to select a large range of mixed (locked and unlocked) cells and, in the unlocked cells only, pre-populate with a standard formula.
I've got most of it working, but what I need is the specific code that allows the user to specify the range of cells they want the macro to act on.
I have tried various syntaxes but nothing is working for me. I am using XL 2000 so it doesn't have the relative address function in the macro! So here is what I have
ActiveCell.Range("A1").Select
ActiveCell.R1C1
Range("R1C1:R1C85").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlValues
Application. ScreenUpdating = True
Range("A1").Select
I need to be able to select from the originating cell which will always be in "T" Col thru to "CZ" col but will be on different rows.
Using a script but when I use the given Range it is still using the complete WorSheet.
I have made a sheet where the user can insert/delete rows in a certain intervall of rows. The upper row is 17, that is I have named the cell "First" and then the last row "Last" and then I am using integers:
Dim intStartrow As Integer
Dim intLastrow As Integer
intStartrow = ActiveSheet.Range("First").Row + 1
intLastrow = ActiveSheet.Range("Last").Row - 1
So it is only possible to add/delete rows if the markerer is in between the above rows.
Now I would like to select the rows, from first to last. Since the rows are never the same, users add and delete rows all the time, I can not use
Range("A17:Z49").Select
Can I somehow make a range selection using the Integers, somethimg like
With ActiveSheet
Selection."intStartrow:intLastrow"
End With
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have a sheet that has 65000 rows and 3 columns, I need to load this sheet into a system that will only deal with 25000 rows at a time. How do you do a huge range select with Excel?
I need to select range a1:c24999 cut it out and paste it into another sheet. I have about 75 of these these sheets to do is there a way with a formula, a script or? to do these huge selects?
I am a Mac user, running MS office 2008 for Macintosh.
How do I protect a select range of cells from being changed? There may be some formulas in certain cells, which produce data based on other worksheet cells. These cells are not for user data input, but for data output only. I don't want end users to acidently delete the formulas in cetain range of cells, by entering a value in the cell, which then will write over the formula.
View 5 Replies View RelatedI am having a problem putting a range select statement in my macro. Here is what I'm trying to do. I want to select E1, then count down 10 cells below and copy. My sheet is filtered, so those rows are not continues. When I do the record a macro it highlights the rows and it looks like this (e10:e506, but it's only 10 items). I only want it to count down 10 cells and copy. Is there a statement for this.
View 3 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedWhy the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
I’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI want to do is clear all the cells on a worksheet that are not locked. Problem is that any cell could be locked, no rhyme or reason.
View 9 Replies View RelatedI download some data from a commercial real estate site about properties and their owners and process it in Excel. Out of 1,000 records, maybe 20 or so will have the data end up in the wrong fields. This is an artifact of the data source the commercial site uses.
Anyway, what I need to do is to get the data back in the right fields. So, I sort the data to pull together at the top of the sheet all the records with data where it's not supposed to be. So far, so good.
Now from one data download to another the number of records which end up in the sort will be different. And, here's the problem.
I try to record a macro mimicking my selection of the range of the data that needs to be moved. Fine, no problem. And, on the same dataset it works like a charm. But as soon as I put a different dataset into the spreadsheet with a different number of records that need to be corrected the macro fails.
Apparently, this is because the macro has been defined with a certain range of cells selected in the first data set and this same range is used for subsequent datasets with different numbers of errant records.
Basically, what I'm trying to record in a macro is the Shift/Control End and Shift/control arrow commands. But they don't record as such.
i have a spreadsheet that data is imported to from a different program. however the amount of rows of data will change from day to day. I need to be able to select this range of data before i run a macro on it.
View 11 Replies View RelatedI am trying to find a table of text, and copy it to another worksheet. I want to copy it as a range, not as rows or columns. Using Find, I can get to the 1st row of the table. Using Find again, I can get to the last row of the table.
What I don’t know how to do next is select the range.
For example; The table is in cells A10:F20. “Start” is in cell A10, and “End” is in cell A20.
Starting from cell A1, how do I find and select the range A10:F20.?
I will be doing this twice in the same macro, as there are 2 tables. Each of the 2 tables has the same “Start” and “End” text, as described above. The 2 tables will not always be located in the same location within the original WkSht.
How would a code look like to select a range with a column header on top. in the code you provided, it selected the entire W column. How would you select the range given that the W column was called Address?
Sheets("Sheet1").Select
Range("W1").Select
Range(Selection, Selection.End(xlDown)).Name = "Problem_Area"
I have a macro that contains a line:
Range("BB1011:CX1064").Select
The number of columns selected remains the same, but the number of rows changes. The indicator that tells me how many rows to select is contained in cell F1007 and in this example contains "54".
How do I adjust the macro to change the number of rows to select dependent on the value in F1007?
I would like to Pause a macro to allow the user to select a range on the spreadsheet and then click OK to continue with Macro.
I tried to use Msbbox, but I can't figure out how to allow user to access the spreadsheet to highlight the desired range.