Select Cells From Range That Contains Comma?
Jun 21, 2013
I have come up with this bit of code by joining in two separate sets of code that I used earlier. What I want to do is this, for a given range I need to find each cell that has a comma and once that cell is found a formula has to be applied in a cell few columns to the left.. Here is the code that I am using..
Code:
Sub Macro8()
Dim i As Long
For i = 1 To 1000
[Code]...
The sheet can be downloaded from here, I want column H to be (Col B / Col C) whenever Col A has a cell with comma in it. For this sheet col H needs to be populated 3 in places. The code above does it only for first instance.
View 6 Replies
ADVERTISEMENT
Apr 19, 2007
I seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
View 10 Replies
View Related
Feb 28, 2014
Why the following code gives me an error. I have so much trouble with ranges, I use the syntax as it is prescribed. Here is the code. I will include some code lines underneath since I imagine they wont work either.
[Code] .....
I eventually will be turning the range statements into copy and paste instead of select. At the moment I am using select to make sure the proper cells are being selected.
I am also attaching my complete workbook as well.
Attached File : Therapy Tracker - Tester V2.3 -deleted logo.xlsm‎
View 2 Replies
View Related
Mar 22, 2007
How can I select a range of cells dynamically, not know how many cells down for two columns that I will need to select, there will be a blank cell at the end of the needed range.
View 9 Replies
View Related
Jun 29, 2006
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
View 12 Replies
View Related
Oct 4, 2012
I'm looking for a macro that only selects the unprotected cells in a range. So that I can copy a formula in these cells.
I found the below macro on the web but it will select all the unprotected cells in the worksheet. I guess this one can easily be adjusted to only select the cells in a range, but I do not know how to do this.
Code:
Sub SelectUnlockedCells()
Dim WorkRange As Range
Dim FoundCells As Range
Dim Cell As Range
Set WorkRange = ActiveSheet.UsedRange
For Each Cell In WorkRange
If Cell.Locked = False Then
[Code]...
View 4 Replies
View Related
May 30, 2007
I am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 Replies
View Related
Feb 9, 2008
I need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies
View Related
Mar 12, 2008
I have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
View 3 Replies
View Related
May 9, 2008
I'm trying to create a macro for another user that she will use repeatedly for many different spreadsheets. Each spreadsheet will have a varying amount of rows that will need to be exported to a different file. She will highlight the cells she wants exported and then hit a button to do so. My problem is this: how do I code a macro so that it will know which cell is the beginning of her selection and which is the end?
View 2 Replies
View Related
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Aug 29, 2009
I have a sheet that has 65000 rows and 3 columns, I need to load this sheet into a system that will only deal with 25000 rows at a time. How do you do a huge range select with Excel?
I need to select range a1:c24999 cut it out and paste it into another sheet. I have about 75 of these these sheets to do is there a way with a formula, a script or? to do these huge selects?
I am a Mac user, running MS office 2008 for Macintosh.
View 11 Replies
View Related
Mar 5, 2013
How do I protect a select range of cells from being changed? There may be some formulas in certain cells, which produce data based on other worksheet cells. These cells are not for user data input, but for data output only. I don't want end users to acidently delete the formulas in cetain range of cells, by entering a value in the cell, which then will write over the formula.
View 5 Replies
View Related
Jan 13, 2009
I am having a problem putting a range select statement in my macro. Here is what I'm trying to do. I want to select E1, then count down 10 cells below and copy. My sheet is filtered, so those rows are not continues. When I do the record a macro it highlights the rows and it looks like this (e10:e506, but it's only 10 items). I only want it to count down 10 cells and copy. Is there a statement for this.
View 3 Replies
View Related
May 7, 2009
I'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies
View Related
Apr 22, 2014
Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
View 3 Replies
View Related
Sep 22, 2008
I’d like to copy a range of cells: (A1 – A4) and paste them into Cell A5, but here’s the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies
View Related
Apr 13, 2009
I want to do is clear all the cells on a worksheet that are not locked. Problem is that any cell could be locked, no rhyme or reason.
View 9 Replies
View Related
Mar 26, 2014
I have a column with rows from 41:254, the first cell contains a word, and the next is blank, and this repeats the whole way down.
a previous macro i run changes one of the cells in the range (one of the ones containing a word) to a number value, i want to write a further macro to select this cell that has now changed. when it changes it will be the only cell in the range with a number in.
View 4 Replies
View Related
Jan 30, 2008
I've never worked with Excel macros prior to today. I'm working on this for a friend.
I've got this sheet that's going to a web address, importing a table from the page, and making a line graph of the data. I got all that to work fine (after a lot of trial and error). Now I've got the data, and I want to make a scatter plot of it...
Here's the thing. I want each month of the data represented as a line on the plot.
This is hard to explain. It looks like this:
[url]
So from there, I want a loop to scroll through the dates and select a range that represents January, a range that represents February, etc, so I can save those ranges as variables and make a scatter plot with 12 curves on it.
Here is the code I have so far, in case you want to see it, not sure why you might need to though.
View 14 Replies
View Related
Aug 7, 2009
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies
View Related
Jun 18, 2012
So I'm creating a UserForm that takes user input to create a worksheet based on the values input. My question is: How to select a range of cells based on a variable input value? For example, it asks how many competitors there are, and the user can input 5, 8, 10, etc. So I want that many cells in Row 1 selected, whatever the value input is.
View 9 Replies
View Related
Aug 19, 2009
I recently found this code for selecting a whole column of non continuous cells.
ActiveSheet.Range("a1",ActiveSheet.Range("a65536").End(xlUp)).Select
How can I change the "a1" & "a65536" so it can work and be activecell instead?
View 9 Replies
View Related
Feb 3, 2010
How do you select specific coloured cells from a range of data in one go, without having to scroll through the worksheet and pick them out individually?
View 9 Replies
View Related
Aug 16, 2006
I have a range of data in columns A2 to Mx. The length of the columns varies, and all cells are not always populated. I want to be able to select the entire range, no matter what its length, no matter how many cells are populated (as both of these will vary on each tab) However, I do not want to select A1 to M1 as this is column headers which need to be excluded from the data for compliation purposes.
View 9 Replies
View Related
Jul 21, 2006
Is anyone aware of some way to use the " dynamic named range approach" to only select the cells with numerical values in a column and name this range?
I've looked at the examples on this site but can't find any solution to this particular problem although I have a feeling that this should be possible.
View 9 Replies
View Related
Mar 7, 2008
Arised from my earlier posting in Populate ComboBox With Specific Sheet Column Range. I have the following working code below, but am having trouble finding coding examples to select specific cells from the selected row (that was found by selecting a ComboBox value)and update TextBoxes with those individual values after the UserForm has been initialized (the bold "GREEN" comment in the code below). I have been able to find plenty of references to update TextBox values to Cells, but that doesn't do me much good in this application since the User needs to verify the old data in these cells before updating them using the UserForm TextBoxes.
I was toying around with several different variations of code (none of which worked properly), so I left it out for clarity of my working code. I'll post up this non-working code as needed, because I really wanted a fresh answer...not what I was trying to do. The attached file should be sufficient to see what's going on
Private Sub UserForm_Initialize()
With Sheets("SR Information")
.Range("A2", .Cells(Rows.Count, "A").End(xlUp)).Name = "MyRange"
End With
SRnumber.RowSource = "MyRange"
End Sub
Private Sub SRnumber_Change()
Dim ServiceRequestNumber As String
Dim c As Range
Dim rngG As Range
Sheets("SR Information").Select
With Selection
ServiceRequestNumber = SRnumber.Value
For Each c In Intersect(ActiveSheet.UsedRange, Columns("a"))
If c = ServiceRequestNumber Then..................
View 4 Replies
View Related
Jun 29, 2006
I'm having a problem in a single line of code in which I'm using a Range Object to essentially select an area of cells whose contents I want cleared.
Here is the
Sheets(Left(c.Value, Len(c.Value) - 1)).Range(Cells(4, 2), " &:& ", Cells(Rows.Count, "b").End(xlUp).Offset(0, 9).Select).ClearContents
I want the range part to evaluate as (b4:whatever the last cell is before the first blank row).
View 9 Replies
View Related
Jul 19, 2009
I am trying to select a range based on two variables which store the column numbers. what I have is:
View 4 Replies
View Related
Aug 4, 2009
I think this is a really easy question but I can't seem to think of an easy answer. I have 300 cells in one column I want to have combined into one cell, seperated by commas. I know I could just =A1&","&A2&","&... but this is not what I want to spend my afternoon doing. Is there a better way of doing this?
View 3 Replies
View Related
