I want to select the only cell in Column A (there will only be 1) that has the colour index 15. I don't want to do anything with it other than select it. I've searched this, and many other sites, and everyone wants to changes colours or use CF, I just want to select it using VBA so I can use it in a macro.
I have VBA code that changes the cell background colour in column A based on criteria in column B. What i want to do is select a cell in the same row in a range column O:AB and change the background colour to the same as column A. This action is for rows 4 to 41.
Basically i just want to click in a cell and for that cell's background colour to change and match the colour in column A.
I need a fast procedure to create a range variable which comprises of non-adjacent cells which have an interior color of yellow say, within one sheet.
View 9 Replies View RelatedI would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
Need faster way to select those cells (non-continous) that highlighted with yellow or read colour.
View 2 Replies View RelatedA column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies View RelatedI've had a look through the forum and can't see an answer, so apologies if I'm duplicating something!
I have a spreadsheet where column O has five conditions:
1 PO in
2 High Probability
3 Medium Probability
4 Low Probability
Blank
I need to colour code the whole row based on the value in the cells; if there were four conditions, I could do this with conditional formatting, but with five (with white as the fifth condition), I need to look at VBA.
However, I'm having difficulty colouring the whole row; how do I do this?
e.g. what I need to do is:
If O2 = "1 PO in"; Select A2:T2; Colour green
In addition, I need to ensure that if there is no data in column D, but column O is "1 PO in", it is highlighted in a separate colour. I have a macro for that, but don't know whether in needs to be put into the code before or after the macro needed above...
Is it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies View RelatedI want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies View RelatedI work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
Using 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies View RelatedIt is possible to add something in a spreadsheet VBA to colour a cell Green and put a box surround on it if the cell = "Closed" from A7:V65535
Basically I have four conditions for status of a task and i can only use 3 formats on conditional formatting so i need some code to format the last remaining status type which is "Closed"
Got this part of code to make it the correct colour
With Selection.Interior
.ColorIndex = 4
.Pattern = xlSolid
So I have a macro that colors the selected cells in a certain color. Now im looking for a code that will switch that color every 7th cell, the cells will only be selected horizontally. For example:
if the selected range is 10 cells, 7 of them should be in one color and 3 of the should be in another. But if the selected range is 15 cells the first 7 should have one color and the next 7 should have another and then the last one should have the first color again, and so on..
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
I need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies View RelatedI am trying to make the colour of cell change depending on the result in an adjacent cell and have found and adapted the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("x4:x202")) Is Nothing Then
Select Case Target
Case 11
icolor = 43
Case 21
icolor = 43
Case 31
icolor = 27
Case 41
icolor = 27................
Below is a formula i am using on a spread sheet. What I would actually like to do is instead of the cell showing "OOS" if the statement is false, I would like it to show Z11 but in bold red so it stands out.
=IF(AND(Z11>=35,Z11<=45),Z11,"OOS")
I am using
Range("E9").Select
With Selection.Interior
.ColorIndex = 36
.Pattern = xlSolid
End With
This colours the cell that colour (36) how do I say to take the colour in the cell already?
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
I have a worksheet with columns formatted to total in RED if negative & BLACK if positive. However, despite redoing time & time again, although the total is positive, the colour of the text is PURPLE? All surrounding cells are formatted correctly. Why cant I get rid of this PURPLE?
View 6 Replies View RelatedI have a userform that outputs data to a worksheet. One of the textboxes contains either one of 3 values, either: N/A, Debit, or Credit. This textbox is called "tbDebitOrCredit".
What I need is, when the the user clicks the "Submit" button and the data is output to the worksheet, the cell that recevies it output from "tbDebitOrCredit" turns a specific colour based on the value.
For example:
N/A = White
Debit = Red
Credit = Green
I dont have that great knowledge in Excel but i wanted to try and run a
macro in an IF formula but realised that was not possible. I have now got a
formula that gives a value in a cell when i want the whole row to turn to
red, but im not sure how i can get a macro that will change the whole row to
red when that cell shows a value. Can anyone help on this matter?
I am tyring to do conditional formatting whereby if anything is entered in a cell i want the colour to change to say yellow and if nothing is entered just to leave blank.
View 9 Replies View Related
