I have my data arranged in 4 columns as shown below (sample data). I need the Excel to find the largest value for each date and write them somewhere along with those dates. For example, the Excel should write in the 5th column (E) below two dates and values based on the sample data I listed below -
4/1/2007 - 0.044
4/2/2007 - 0.055
I have about 17-18 values for each date between 4/1/2007 and 10/31/2007.
Sample Data
========================================
A B C D
--------- ---------- ---- -----
Date SITE POCConcentration
4/1/2007 11001002510.039
4/1/2007 11001004110.042
4/1/2007 11001004310.039
4/1/2007 24009001110.042
4/1/2007 24017001010.044
4/2/2007 11001002510.051
4/2/2007 11001004110.048
4/2/2007 11001004310.052
4/2/2007 24009001110.053
4/2/2007 24017001010.055
4/2/2007 24021003710.055
I am having some data running into 60 (C:BJ) columns and 200 rows. It is the record of dates query raised and answered with refernce to query number in the A coulmn. I have zero value as entry for the unused cells in this range due to some constraints. I need to find the smallest and the largest non-zero date in this range for analysis purpose. I plan to use the difference between these 2 dates to calculate turn around time for a query.
Problem is to find the smallest and the largest non zero date within range C6:BJ6 which would be used as input in the Networkdays formula.
I want to identify the column heading for the first, second and third most popular courses. ie for School1 the most popular course is Maths, second most popular is English and so on.
I have tried using the OFFSET function, which worked if I provided the cell location of the required value. I then looked at the ADDRESS function to provide the cell location: eg For School2 find the 2nd most popular course:
I have userform with date pickers and have text boxes overlaid on these, when I select todays date from the date picker it does not display the current date in the text box (I have 8 date pickers on the userform). If I select another date then reselect the current date it works. It has occasionally worked but why.
Below is the code for populating the text box from the Date Picker.
Private Sub DTPicker1_Change() TextBox1.Value = DTPicker1.Value End Sub
The initialize userform code uses the following to format and set the textbox
i need VB to select the start date of booking and autohighlights the "blank booking slot cells" until the end date that is input in Excel. You can visualise this as a room booking system. The left most column is the dates and the first row represents the different rooms type. E.g. if one guest books the Twin Deluxe No. 123 room on 23 Oct 2006 until 25 Oct 2006. We wish the VB can essentially help us identify the start date then begins highlighting the three slots for 23, 24 and 25 Oct on the column for the Twin Deluxe Room 123.
was given only looked at the nearest date and not the nearest date after.
So here goes; I have a table that looks at new starters and the date they started, and then a list of dates appointments offered (these dates can and often do precede to person joining us).
What I'm looking for the first chronological date AFTER the New start Date.
In row 3 this works; as it is the nearest date, but in row 4 however, it is the nearest date; but occurs before the New start Date, thus is incorrect.
I have a cell pulling the date from another page and the dates comes across as "2/1/2013- 4/15/2013"in cell B2 and I have the code in sheet 1[code]=IF(OR(Safeway!A43=""),"",Safeway!A43)[code] pulling data from the sheet 2 already in the middle with a code for later use to hide a certain character. I have a condition code set so if the date is past current date, it will turn red but with the 2 dates in the same cell, I am unable to get it to turn red. How do I go about only having the 2nd date show up so the condition works while already having this one code in the cell? I attempted to add the early stages of this program for review.
I need to create a data base from figures extract everyday. I would like according the date to copy the figures in the sheet "Extractor" to paste in the column corresponding to the day of today in the sheet "Database". If possible as well, the figures of the dates before today must be delete (in the color tab)
I join a sample of what I have. I tried with the indirect function, but didn't find how to keep the figures of the previous dates.
I am attempting to select a row if the date field value is within a date range.
I would like to be able to click a button, have a pop-up, be asked to insert a start date and an end date. For example 2014-07-01 and 2014-07-21 I would then like the macro to copy rows if the date value is within that range to the next available row onto a new worksheet.
It sits in the "This Workbook" code window to run each time the wbook is opened. What I want it to do, is based on the date in Sheets("Control").Range("L3") select a particular cell in another sheet called "Risk Sum". I'm assuming this is easy to do, I've come up with the following, but it just doesnt want to work ...
I am looking for a macro that will put data from another worksheet by the date. So if A1 is 01/01/2007 I want to bring the information in from A2,A3,A4 and so on in A1 on the other worksheet. But if B1 is 01/01/2007 I want to bring the information in for B2,B3,B4 and so on in A1 on the other worksheet.
I'm trying to write a code to define different months and shade their backgrounds but i can't seem to get it to work.
The fields are set out as follows:
01/01/2007 13:31
The code i have at current is:
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer
If Not Intersect(Target, Range("A1:Z1000")) Is Nothing Then Select Case Target Case 1 / 1 / 2007 To 31 / 1 / 2007 icolor = 6 Case 1 / 2 / 2007 To 31 / 2 / 2007 icolor = 7 Case 1 / 3 / 2007 To 31 / 3 / 2007 icolor = 8
We have a table that tracks customer payment dates with corresponding payment details.
Our current Excel program works fine when the Customer payment dates progress (non-duplicate date entries) ... BUT .... sometimes a Customer will send multiple checks on the same date (duplicated date entries), and then our program gives incorrect results.
You will see that this Customer sent in three checks all dated 11/22/2013 ($100, $50, $50).
What we need is a formula that will look at the dates in Column-A, choose the last entry (before any zero or blank), then provide the corresponding value in Column-D.
So in this case, the result we need is (100.00) ... the value in cell D16. Our program is erroneously providing 100.00 ... the value in D14.
I'd like to select the start date & end date for multiple Pivots (on one sheet). Expl. if I put in a date in the "Start Date" cell : 01/01/2010 and another date in the "End Date" cell : 15/01/2010. Then all the pivots on the sheet should only show the date between 01/01 and 15/01/2010.
The dates in the pivots are under column "Date". I have a code but it only selects 1 pivot and it doesn't refresh the pivots when you change the dates selection.
I want to make an easy to use timesheet for work. I have a calendar set up on a sheet in a workbook and i want to be able to select any date in this calendar and have it be copied into a cell of my choosing in another worksheet in the same book. I already have the formula set up to auto fill the rest of the week from that date, any ideas how to do the selection and copy and paste part quickly and simply?
I am using a mac so cant use the calendar control function as far as I know, if I'm wrong let me know because it sounds very simple.
I have tried to adapt some code and it all works (I get no error messages) but for the fact that nothing is pasted. What is wrong and is there an easier way?
Sub AddDate() Dim dt As Range Dim wc As Range
On Error Resume Next Set dt = Application.InputBox("Select the date", Type:=8) Set wc = Application.InputBox("Click on week commencing", Type:=8) If dt Is Nothing Or wc Is Nothing Then Exit Sub Range("dt").Select Selection.Copy Range("wc").Select ActiveSheet.Paste On Error GoTo 0 End Sub
I have a workbook that is connected to a MySQL DB.
I want to get all the months organised in columns then the Amounts of those months underneath the specific month. I can only do one at the moment in this select query but do not know how to go forward by creating the other month and their data?
My code looks like this:
Private Sub cmdGO_Click()
Dim conn As ADODB.Connection Dim dbRecset As ADODB.Recordset Dim sSQL As String Dim l As Long, l2 As Long Dim Last_Row As Long
I have a userform which allows user to selected a date formt he calendar. In my code I name the value selected myDate. I want to have a line of code at the begginning of my code that checks if myDate = a date already listed in column H on a sheet named "all dor's". if it does match then a msgbox appear saying "date already entered" and the code return to the opened userform.
I managed to create some code that will connect to a workbook and take the data from there.
It is kind of SQL mixed with VBA. I just got this by finding it in google (I don't have the link handy now).
What the file does, is it will take 2 columns from a workbook called "Test.xls" and then take out 2 columns "Name" and "ID".
The only thing is, this is only a test and not the actual files I need to open. the files are always saved on the same folder, but the name is the day of the export of it. So when I export a file today, it will get 2014.09.10.xls. The sheet (only 1) will also get that name.
How could I change the below code that it will take that file based on today's date and read from the sheet with today's data?
VB: Sub sbADO() Dim sSQLQry As String Dim ReturnArray Dim Conn As New ADODB.Connection Dim mrs As New ADODB.Recordset Dim DBPath As String, sconnect As String 'DBPath = ThisWorkbook.FullName
I am looking for a formula that will select a date in the month based on certain criteria. Found the choose function but not sure if I can really get that to work. I basically have a list of clients, with zip codes, restricted days of the week - and would like the system to group them by zip code and select the best day of the month to schedule an inspection but not pick he restricted day. The goal being have zip codes scheduled together - but on a day other than garbage day. Is this even doable?
