how can i (in VBA) select 1 row (eacht time, it's an ? iteration? (repeating)), while the first 2 cells are merged, like:
a b c d .....
1
2 merged
3 merged
and i need to select row 3 only
and if someone could explain me how i can use the " find" function (on another sheet)
Please see the attached sheet. I have columns B through a lot (B through O in my oversimplified example). In every 7th row in each of these columns there is either a 1 or a blank/zero. I need to multiply that 7th number by the Quantity in column A, to achieve a total (ie the sum of each result of 7th cell*quantity) for each column in the bottom row, labeled "Totals".
In the actual version of my sheet, there are far too many rows to select everything manually. I've been fiddling with combinations of COUNTIF/COUNTA and OFFSET, but I haven't come up with a way to check for the 1 in every 7th row, THEN multiply that 1 by the quantity in column A, THEN add up the results for each column. As you can see, there are 1's elsewhere in the columns that are irrelevant to this particular calculation, so something like LOOKUP would also have to look in every 7th cell and couldn't just look at the column as a whole.
If you can't provide an immediate solution, but can at least point me to a resource that would allow me to devise a way to isolate every 7th row (THAT part is the sticking point), I'll surely post the solution to my own thread with updated keywords if I need it.
i have a merged cell which runs across a multiple columns (but a single row). i would like to insert a column in the middle of this merged cell, but whenever i click on the column header to insert a column, the entire merged range is selected.
is there a way to change the excel setting to avoid this?
I'm trying to search column 1 for the word "STATE".
Dim rFound As Range
On Error Resume Next
With Sheet5
Set rFound = .Columns(1).Find(What:="STATE", After:=.Cells(1, 1), LookIn:=xlValues, LookAt:= _
xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False)
debug.print rFound
On Error GoTo 0
If Not rFound Is Nothing Then Application.Goto rFound, True
End With
I've been working on a macro which delivers a daily report. the report is made up of 4 sections (received orders, scheduled orders, pending orders and unusual orders) each section is topped by a title which is a merge of all columns (A through I) the problem I am having is that the first column displays case numbers (to be displayed in text or number formats) and the 7th and 8th columns are dates When I try to have the VBA select the first column to format as a number, it will select all columns due to the merged cells is there a way to format only non-merged cells of a columns
This is the section I currently use for formatting but it doesn't actually work, (everything ends up in a date format)
[Code] .......
I am using the following functions to determine the highest row and column that contain data:
View 4 Replies View RelatedI have 10 columns and 18 rows. Every 2nd row might contain a number. I need to sum those numbers, however, sometimes group of cells in a row can be merged and i value of a cell is then 0.
example:
A1 to D1 merged; value 6
A3 to B3 merged; value 3
B5 to E5 merged; value 2
=sum(A1,A3, A5) would return 9 - correct
=sum(B1,B3, B5) would return 2 - should be 11?
=sum(C1, C3, C5) would return 0 - should be 8?
=sum(D1,D3, D5) would return 0 - should be 8?
=sum(E1, E3, E5) would return 0 - should be 2?
I have a column that has mostly empty cells. I want to select only the ones that have data so I can perform an operation on all of them. Empty cells must be excluded from selection. I do not know where the bottom of the data is.
The solution needs to be in VBA where it is part of a larger macro affecting the user's worksheet.
I am inserting a subtotal above my data set, the first cell that this subtotal takes place is "R1", then I have an unknown number of subtotals going right, depending on the number of months FCSTed by my sales managers.
Attached you will find a subset of the data and you will see that I need to select "S1 : iLastColumn(1)".
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.
The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.
This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).
For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.
Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.
Then (10-1) margins allowances time 3.75 points resolves the difference.
Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.
I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedI have a scorecard that automatically adds a merged row across each column when it is exported to excel. Is there an easy way to copy the entire column over to the next sheet without manually changing the formula in increments of 2?
View 1 Replies View RelatedI have a spradsheet that I've formatted using merged cells. The spreadsheet has several columns. Into these columns I must enter raw data extracted from our SAP data base. The extraction worksheet has no merged cells. So bottom line, I have a column of say, 30 non-merged cells and I want to paste that column into my formatted spreadsheet that has 30 merged cells of thre cells a piece (90 cells total).
So far I have been unable to do this. If I've attached it correctly, the sample attached
MERGE EXAMPLE.xls‎
Im having problems trying to sort through data and linking certain data. I will post example below:
Main 1
Main 2
Main
3
Sublevel 1-4
[Code]....
This is just one part of a row of the workbook but shows the Main data which is made up of 4 different sub levels on the right. I merged 4 cells for the main data so that all the cells lined up but I'm still having problems with being able to sort and link the files together so that when I filter, they all do it together. The example didn't paste well.
i have a problem to sort merged cells in the file attached. i tried via macro but could not reached a good solution. I have 30 plans inside the sheet and even manually is too hard to do it because i use some "=" to not type again every number since some are the same but when i try to sort the lines became diferent values.
View 10 Replies View RelatedI now see why alot of you dont like merged cell's. What i am trying to do is Cut and paste a range that contains merged cells. A kit can be created using the Button on the sheet. The cells in column G are merged down to the last kit item. On Row A of the kit the 1st cell contains data validation once the Delete kit cell is re-entered it removes the selected kit from the sheet. Then will select all kits below the (now deleated one) and cut the range, and paste it to where the old kit was located.
When the kit's are pasted into the new location there are issues with the merged cells in column G. Is there a way to fix this issue, or know of another approach to keeping the same layout.
I have merged cell C2:C9. When I insert formula =C5, it returns 0. How do I make it to return the actual value?
View 11 Replies View RelatedI have exported a report to Excel from a BI tool called ZAP.
Unfortunately the cells in the columns are merged by group eg. salesperson, product, country.
I need to be able to filter by each of the columns - the only way i can think of is to unmerge and copy the information to the rest of the "merge area".
This will be extremely time consuming as there are more than 1000 rows and at least 5 columns that I want to filter.
Sales PersonCountryCustomer NameProduct Model DetailJohn WUNITED KINGDOMAPCBasicPremiumStandardStAPLAccessoriesAcrylic FsPremiumFsStStyAPOAccessoriesPremiumStandardStAPMFsPremiumStandardSt
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have a table where sometimes cells are merged. To the right they are not merged, but I need to link to the value of the merged cell. How can I do it if I don't want to do it manually?
Example:
Say A1:A4 is merged, A5 is just normal. I want a formula using those values, say in B1:B5. Now just filling down the formula would reference A1, A2 and so forth. This is wrong.
when i try to link a merged cell to retrieve result, i get cell ref for both cells, i only like to see B7 not B7:E7.
Summary C708 Spreadsheet FormulasCellFormulaC7='Abode Homewares Pty Ltd'!B7:E7 Excel tables to the web >> Excel Jeanie HTML 4
I have a workbook in Excel 2007 where I am creating a summation worksheet through the use of arrays which sumif and countif the other worksheets. Things went fine until about halfway through when I started getting merged cell errors. In between the calculations, I had some merged cell rows for section titles. I was not entering the array into them, but researched the error and unprotected the cells. Problem solved. Now, with 10 row to go, I started getting the error again. I unmerged the sectional title rows. I verified that the cells are not protected. However, when I ctrl+shift+enter to input the array, my formula is moving from the cell that I am inputting to, to the cell in the row directly beneath it.
View 3 Replies View RelatedI need to compare cells in two worksheets but with a difference ex:
Worksheet 1 contains merged/single Cells
Worksheet 2 contains single Cells
Now , i fneed to compare first merged/single cell in Worksheet1 with first single cell in Worksheet2 and similarly , second merged/single cell in Worksheet1 will be compared with second single cell in Worksheet2 and so on.........
Though i can use exact and compare them maually by specifying cells but since i need to make it general , suppose second time there can be some other combination of Merged cells I need to compare with Worksheet2 .
I have a merged cell area, several columns wide and 2 rows deep.
I know that pressing enter before reaching the end of the first row moves to the next cell below. Is there any method, either key combination or whatever, of moving to the next row within the merged cell?
I have the following VBA script that merges 2 cells together, but at the end of the merge I need it to add the filename and path of the active workbook.....
Sub Merge()
Dim Cell_e, Cell_Sheet1 As Variant
Dim R, C As Integer
'This Macro is add the Test condtion and the precondtions together in 1 cell, before they are exported to TD
Sheet2.Select
R = 11
C = 9
Do Until Sheet1.Cells(R, 9).Value = ""
Cells(R, 9).Select
Cell_Sheet1 = Sheet1.Cells(R, 9).Value
Cell_e = Sheet2.Cells(R, 7).Value
Sheet2.Cells(R, 7) = "Test Condtion: " & Cell_Sheet1 & Chr(10) & Chr(10) & "Test Preconditions " & Cell_e
R = R + 1
Loop
End Sub
I have read the posts regarding merged cells and understand they should be avoided, but I am working with spreadsheets created by others. My problem is that I need to sort the data, but some of the cells are merged so it won't work. Is there a macro command to easily find the merged cells and unmerge them?
View 5 Replies View RelatedI am conditional formatting with fill colour based on specific text- the cells are merged down into a double cell- when the cell changes colour it goes half one colour and half another colour based on the order i have them in the rules- i only have them set to one colour per specific text and the text is all different- so why am i getting this half and half look?
View 1 Replies View RelatedI have a pair of workbooks in which one calculates a number of values and I want to store the values only in the other.
I would expect to be able to highlight the range of the calculated cells in the source workbook, Copy and then Paste Special | Values in the other.
Both the source and the target contain some merged cells. When I try to do the paste, it complains that "this operation requires the merged cells to be identically sized".
They are identically sized.
I have even done Paste Special | Column Widths to guarantee they are identically sized. It doesn't complain about the merged cells then; in fact, it doesn't complain about the merged cells with any of the other paste operations, only with Values.
I have been able to repeat the behaviour with a very simple example. See the two attached sheets. Try pasting Values only of the range $B$2:$D$4 from either one to the other.
When I first created the samples they worked. What seemed to triggered it is I changed one of the merged column widths by one pixel, tried expecting it to fail (and it did), changed that column width back again and it hasn't worked since. As I said, I even tried pasting the Column Width to the target, which it appeared to do successfully, but it hasn't helped.
Now, the attached examples are only to show the principle of the problem. They are very simple and there would be a myriad alternative work-arounds for them. In my original case though there are many formulae over a much larger range and I want other people to be able to paste values without having to follow complicated instructions, so I am not looking for work-arounds unless someone has a mind-numbingly simple one that my numb mind has overlooked.
The only other way of solving the problem that I can think of would be to write a macro that copies cell values individually, but I'd rather not do that because I know these people: they will get narky about having to enable macros. It will be "against organisation policy" or something.
Is there any way of resetting the target workbook so that it will receive the values from the source?