Selecting Cells Each Side Of A Selected Cell
Feb 13, 2014
I have a column of values D1:D200. Using this =CELL("address",INDEX(D1:D200,MATCH(MAX(D1:D200),D1:D200,0))) it displays the cell with the largest value in. I have been trying to using VBA to select the 10 cells above and below the displayed CELL reference and so far I have failed. The largest value will always be somewhere in the centre of the column of values (between D50 and D150). I am looking to chart the trends leading up to and passed the largest value. I have been trying Range and Cells with no success
View 3 Replies
ADVERTISEMENT
May 4, 2009
i try do function, which will be search/monitoring in selected cell (colored – yellow, orange, blue) and display (in green/results column) the last value in row colored/selected cell (first value from right side – results will be only for row).
View 14 Replies
View Related
Jan 6, 2010
I'm trying to figure out how some conditional formating and I cant get it to work.
What I want is for column H to be highlighted based on the value of column I.
So... If I2<721, then H2 will highlight green. If I2 is between 721&780, then H2 will be highlighted yellow. And if I2>780, then H2 will be red.
I know how to do it one cell at a time, but I need it to apply to the entire column based on the cell next to it.
Also, I dont have access to visual basic.
View 5 Replies
View Related
Jul 29, 2013
If Cell "B55" Cell is selected and I want to Select all the above rows to select till Row 1. Selected Row mught change Say B66 or B82 (Dynamic)
Whatever may be the Cell Selected, The result should be The above rows should get seleted. So that I want to delete the rows easily
HTML Code:
ws.Range("B55").Select
Range(ActiveCell, Activecell.Offset(-55,15)).Select
'This cannot work if the selected Cell is 65, So this should be Dynamic till above Range 1)
View 2 Replies
View Related
Nov 7, 2008
Is it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
For example if the
Column 1 (Previous Version) :The structure contains Wire, Bolt, Stmaps etc
Column 2 (Current Version) : The structure contains Wire, Bolt, Stamps etc
Data Changed: YES
In report is should show two columns side by side and in Column 2 it should highlight "Stamps"
View 9 Replies
View Related
Dec 21, 2011
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
View 1 Replies
View Related
Jul 31, 2009
I have two sheets that need to have unique partial matches aligned side by side. My first sheet is my database. The righter most column of this sheet contains a unique combination of letters and numbers.
My second sheet contains a single column which I export each month from our CMS and is a list of URLs. Within each of these URLs appears the unique set of letters and numbers from sheet 1 (and only appears once).
There are about thrice as many URLs in sheet 2 as there are entries in my sheet 1 database.
Ideally, I would like the URL from sheet 2 that contains the unique combination from sheet 1 to be pasted in the cell immediately to the right of the given unique combination.
However, I will settle for a list of trues and falses next to the URLs in sheet two that I can erase the falses, sort and paste next to the sorted list from sheet 1.
View 9 Replies
View Related
Jun 3, 2009
i have 2 excel worksheets. One of them contains over 20,000 rows of entries (old side) and the other contains about 900 rows of entries (new side). Both contain the same 9 column headings. I've shortened the list in my workbook example.
What i need to do is excel to delete any row on the old side that is not contained on the new side. I don't need the rows to match fully but the column A's (Doc number) are what i want it to check against. I've included a summarised version of the database and the old and new are separated by a heavy blue line. Need to be left with the same rows on either side of that blue line at the end.
View 4 Replies
View Related
Mar 1, 2014
I need function that swaps text from side to side. Text at the left of "x" should be placed at the right side of the "x" and from right to left side:
6x15 -> 15x6 plaah plaah xsomething -> somethingxplaah plaah How to do this?
View 4 Replies
View Related
Feb 26, 2008
I have a sheet with a number of repeating blocks copied down.
I would like a macro that when I select the first block, say range "A1:D30", the macro will cut the blocks below and put them side by side, so that I can compare them across.
i.e cut "A31:D60" and put it in "F1:I30" and so on ...
View 9 Replies
View Related
Nov 22, 2008
I have created a spreadsheet that has information about networks, subnets etc..
The top header for both companies in (CSV format) reads:
Network Namenet_addr1net_addr2net_addr3mask_lengthorg_idcidrlast_upd_dt
I basically split the spreadsheet to show both side by side.
I have this information for both networks that I am trying to compare what subnets, names, IP address etc... over-lap.
We are merging two companies into one, and I need to identify or highlight what information on both companies over-lap.
View 9 Replies
View Related
Nov 5, 2009
why a person such as myself cannot have two or more Excel Docs on the screen side by side at the same time? And if it can be done, how do you do it?
View 9 Replies
View Related
Apr 28, 2009
on the attached workbook i have date on the left jand side and some info from this data will be produced on the right hand side.
Can i have the worksheet so that if the user scrolls down the data on the left the info on the right is still in view?
View 3 Replies
View Related
May 13, 2008
I have some code as below
Range(ActiveCell, ActiveCell.End(xlDown)).Select
This should basically go down a list and stop when there is a blank cell. However due to a previous operation in my excel program, it is not doing so.
Basically this list has been formed from copy and pasting from a list of formulas. some of these formulas return a result and others return "" leaving the cell empty.
When i have pasted i have used paste special/values... but it still seems to paste something into these cells because this macro wont work.
I even went and manually selected the first blank cell and pressed the delete button and when i do this it correctly selects the cells only with content, so clearly when pasting a "" value it stops the activecell operation from working..
View 9 Replies
View Related
Mar 17, 2013
i have a sheet that contains side-by-side,below two formatted colums which has continuous weeks appearance(named PE sheet). i wanna to rearrange the colums to be a single top-down colums according to continuous weeks(named sheet2.are there any easier and faster techniques?a macro probably or a function? arrange(english).xlsm
View 1 Replies
View Related
Jan 8, 2009
what i need is to affect the contents of cell c3.
if i select cell e15 i would like cell c3 to read 123
if i select cell e17 i would like cell c3 to read 234
i believe this could be done using an cell formula if statment but due to teh number of cells i wish to have affect c3 a vba based solution would be required.
i've built an if satement to do this under worksheet activate but not sure how to use the worksheet change way
View 9 Replies
View Related
Aug 19, 2013
I have a spreadsheet that contains dates in column A, the number of rows between each date can vary. Selecting a cell with a date in will activate a checklist in the form of a UserForm.
I am trying to create a macro that will count the number of rows from one cell with a date, to the next cell with a date, and then resize the selection for printing.
So far I have this;
Code:
Sub test()
Application.ScreenUpdating = False
Set InitialCell = ActiveCell
[Code]....
My problem with this code is that when it reselects the InitialCell, the UserForm is reactivated. Is there a way to achieve the same results without having to reselect the InitialCell, and therefore the UserForm wont pop up? I tried adding the Unload UserForm1 line but it doesnt have any affect, the form still pops up.
View 3 Replies
View Related
Oct 31, 2006
I would like to select a range of cells relative to the current cell and move them to the right two cells. Basically, if I were in cell A1 I want to be able to have a macro select A1 - A8 and move them over by two cells leaving A1 and A2 blank.
Excel 2003
View 9 Replies
View Related
Feb 21, 2009
I want to be able to select a cell, for example A10, this would then run a macro that would copy and paste several cells of information along that row and paste it on another worksheet. However, if i then choose a15, a3, a79 in turn (using the control key), it would run the macro using those rows in turn.
i'm looking forward to hearing if and particuliar how this could be achieved.
View 13 Replies
View Related
Jul 25, 2014
I am using this code to hide or unhide rows of text on another sheet:
VB:
Sub ProcessSheet1ChangeOnCellJ7(ByVal Target As Range)
Dim sAddress As String
Dim sValue As String
'Get the address of the cell that changed without '$' signs
sAddress = Target.Address(False, False)
[Code]....
When the "Not Pursuing" list box option is selected (in cell "J7" or "J8" in Sheet 1) I need to add (or over-write) "Not Pursuing" to the range of cells in column "B" (in the "Tasks" sheet), but only for that particular Goal, meaning a limited range of cells in column "B". If the "Pursuing - Show All Tasks" option is selected for a Goal then these same cells need to be blank so that the appropriate person can enter their name into the cell.
The purpose for adding "Not Pursuing" automatically to these yellow highlighted cells is that it will facilitate filtering of tasks by individual in the "Tasks" sheet..
Again I have tried several times to upload a sample file and am unable to, which I know makes it more difficult to solve. (Is there some common mistake people make? I know it's an allowed format and is very small in file size....)
Code solution can be entered directly beneath:
VB:
If Target.Value = "Not Pursuing" Then
ActiveWorkbook.Sheets("Tasks").Rows("29:29").EntireRow.Hidden = False
ActiveWorkbook.Sheets("Tasks").Rows("30:48").EntireRow.Hidden = True
View 1 Replies
View Related
Feb 23, 2014
I have an excel spread sheet and on the last column on the right hand side I have some comment boxes but when I hover over them they pop up to the right of the cell, and then they are off the screen.
Can I alter it to make the comment box pop up to the left side of the cell.
[Code] ....
Is it possible to adapt this code to get me the desired results or will it have to be a separate one.
Also i'm not sure if I have the code right because if I run the macro then open a comment box in the (M) column as in the code the comment box is the default size then if I run the macro again once I have the little red tick in the corner of the it changes to what the code says.
View 4 Replies
View Related
Nov 27, 2007
i need a method to find the end value in a row (right side) and select the empty cell to its right to paste data in.
problem is the row where this data is may change so using
limit = (row, col).end(XlRight).Col
View 9 Replies
View Related
Jun 9, 2009
I'm working with text cells I get this tiny indent on the left hand side of a cell about the size of one hit of the spacebar button.
Excel doesn't recognise this as an indent and I can't get rid of it. It's, pardon my french
View 9 Replies
View Related
Nov 8, 2011
Is there any way we can append the value of selected cells to make it 'value', Basically I need to add ' at the beggining and end of the a value in cells and a comma (,) at the end of it.
Example I have value 12345 in cell A1, When I run a macro by selecting cell A1, it should change it to '12345',
It should apply for all the slected range.
View 3 Replies
View Related
Jul 31, 2012
I have 2 col A & F. F col associate with date values & Col A has some color cells.I want to move down those color cells to a selected non-color cell row when run a macro.
I have code which perform to move color cells down to selected cell but problem is, if i have A4 & A6 color cells and i selected F2 cell & run macro then color cell A4 & A6 move down to cell A2 but cell A3 move to place A6. The sequence is
A1A2A4A6A5A3A7A8 & so on but i want cell A3 just push down the order & sequence will be
A1A2A4A6A3A5A7A8 & so on My code is as
Code:
Public Sub Move_colored_cells_rows()
' Instead of moving the entire row , 10 columns will be moved
Const NUMBER_OF_COLUMNS = 10
[Code]....
View 2 Replies
View Related
Sep 15, 2009
I am using vlookup to get some data from one shhet in my workbook onto the front sheet
so I have a search box and the vlookup duly does as it should and gets me the data into E28:E100 and fills the cells to the right with corresponding data for each item
Now I select any cell from the first column of the search results I want and it gets pasted into the next empty cell range C4:C22 all this works a treat thanks to lots of help from mr excel. What I want to do (without any more vlookups) is pick up the corresponding cells to the right of the selected cell and paste them into the cells to the right of the pasted cell. I cant do it all at once because there is a different amount of columns between the select area and the paste area... hope this is clear
here is a snippet of code that lets me choose the cell to paste
Dim UserResponse as range
'InputBox to Ask the user to select the cell they want copying
'First direct them to the start cell in the column they are picking from
Range("E28").Select
On Error Resume Next
Set userResponse = Application.InputBox("Choose from List Below", Default:=Selection.Address, Type:=8)
On Error GoTo 0
If userResponse Is Nothing Then
End
Else
userResponse.Copy
(here I want to get the address of the cell into store so I can pick up the addresss of 2 cells to the right of it ie selected cell is E54 and I want to copy that and G54 and N24 and paste them into C8 D8 and F8 repectively)
End If
View 9 Replies
View Related
Feb 17, 2008
I would like to select a cell inside my workbook and when it is selected it automatically highlights similar value cells in the same workbook. Is that possible? A Look at the attachment should give you a much better idea as to what I am talking about.
View 3 Replies
View Related
May 2, 2013
I'm trying to use the below formula to to return "true" when text in cell (M2) matches text in selected cells on same row (A2, E2, and G2)
However, all formulas I found online that serve this purpose deal with cell range only, not predetermined cells with exclusions.
Formula:
=IF(ISNUMBER(MATCH(M2,A2:G2,0),TRUE,FALSE) (This will match all cells between A2 and G2 against M2)
reforming this formula to match selected cells only in-between that range (A2, E2 and G2)?
View 7 Replies
View Related
Oct 18, 2006
I have a macro that loops through several workbooks and copies data to one common sheet. Works great with one flaw that I have not been able to resolve. I am using the End Property example below, this works great as long as there are more than one cell with data. With one cell having data this takes you to the bottom of the sheet.
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Need code to select from a specific cell to the last cell in that column with data where when the selected cell is the only one with data that would be the only cell selected.
View 2 Replies
View Related
Oct 28, 2009
I need a macro to do this small task for me. Preferably it should execute when I have selected a cell and press a command button. Here's the way it should work:
Copy the cell I have selected
View 3 Replies
View Related