The code works 100% fine in Excel with no errors when the button is clicked.
However, when it transfers over the data, it is one column off to the left.
Sounds like an easy fix, eh?
Not for me. I've tried everything I could think of.
Code that takes the range and pastes it onto the other sheets in the next available cell:
For Each e In myWs
Set LastR = Sheets("" & e).Range("b" & Rows.Count).End(xlUp).Offset(1)
LastR.Resize(, 2).Value = Range("c4:d4").Value
Next
Set LastR = Nothing
I did find one solution that did bump the cell column offset over 1. It went something like this:
Set LastR = Sheets("" & e).Range("b" & Rows.Count).End(xlUp).Offset(1, 1)
Problem is, it no longer takes it to the next available cell.
It just pastes over the same cells over and over no matter how many times you try it.
I am trying to write a macro, where I want to pick up alternative cells in each column from Sheet 1 and then Paste in Sheet 2. Each column starts with end of every year ( 31st Dec 1996 and so on. My data in sheet for each average column (for different years) is like this.
Average Closing Price 26.47
Stock Return -0.68
I want the value for stock return to be pick up different columns ( for each year) then paste in sheet 2.
I think I have a similar problem as this thread http://www.excelforum.com/excel-prog...o-columns.html. The answer is probably somewhere in the forum, but I looked around and I can't figure it out on my own.
Basically, I copied some data off a website and now I am trying to organize it so it is usable. Here is my example. I would like to put the data below into usable columns. The only data I need is the hospital name (column A), location (column B), Births (column C), and Beds (column D). This is how the data currently appears in excel:..............
I am pulling out information from a cell using =RIGHT(C2,4). It gives me 6-2 in the cell, which is what I want. Now I want to sum the cell but how to do it. I have tried converting it but it doesn't work, I tried pulling out each digit, but that didn't work.
Ideally, I would like a formula that could convert cell A1 into a result in one cell.
I have the same issue, but my data are all in 1 cell instead of separate cells.
The result on my sample Sheet 2, I use RIGHT, MID to pull the data, so I wonder if I can run a macro to have all the data in 1 click.
The header in Sheet 2 is to show you the order of the data to pull, having them or not is not the main thing. I need the data in the same order, that is more important.
To initialize some cells/ranges, I am copying a given range and pasting it to another given range using the. Copy and .PaseSpecial methods. However, it would seem that both methods actually select the range(s) for the operations, i.e. the given ranges(s) are activated/selected thus changing the focus on the spreadsheet. I would like to perform both operations without actually selecting the given ranges.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code: For Each c In Range("Q2:AC2").Cells If c = period Then c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6 Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
how can i select the cell to the right in a macro? i want to runa command in the cell to the right of the one i'm in after a caommand has taken place there
i.e.
1st command run in col b following by selcting the col c and running another command there
I want to copy every other cell in a row that isn't blank to another sheet. I am able to copy every other cell by using
=INDEX(Sheet1!$A1:$J1,2* COLUMNS($A$1:A$1)-1)+1) f
From this thread, by specifying a very long range. But the problem with this is that cells in sheet2 are filled with zeros when sheet1 has empty cells. I have to export the excell file to csv, I don't wan't trailing zeros or ,,,.
I just want to grab the information in C1, then select cell E1, find next blank cell in that row and paste the information. It keeps giving me a runtime error on the line that tries to find the next empty cell.
Code: Private Sub CommandButton1_Click() Range("C1").Select Selection.Copy Range("E1").End(xlToRight).Offset(0, 1).Select Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _ :=False, Transpose:=False End Sub
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB: Private Sub CommandButton2_Click()
Dim Week As Integer Dim WeekRow As Long Dim Groep As String Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
So I am creating a board game in excel. I currently have a draw card feature to draw random cards. I also have section above where you can fill in the answer to the question and another 2 sections that flip to correct or incorrect. Those formulas work as =IF(AND(Sheet1!J6="When resubmitting the claim to another insurance should you be voiding an adjustment to the S code if one is posted?",Sheet1!I2="Yes"),"That is Correct!"," "). I have another for if Sheet1!i2="no" then it flips to that is incorrect. I want an OR formula that will be like if multiple cells have any text in them it will display them but only one cell at a time. So essentially a way for multiple questions to be able to be drawn and you can answer those questions and be told if they are correct or not.
I'm using Excel 2003 and I have a small problem using text functions. My problem is that in column 'A' I have a name and their year next to it between brackets, like so: Wright Jeffrey (1PBSO)
Now what I have to do, is make two new columns where I extract the surname (Wright) to one columns and the first name in another column (Jeffrey), the "(1PBSO)" doesn't have to go anywhere. Now I wouldn't have a problem with this normally but in the list I have names like 'Van Tongerloo Johan' where VAN TONGERLOO is the surname and JOHAN is the first name. For the first name (Wright Jeffrey (1PBSO)) I just used the LEFT function and then searched for the first space in the string but that doesn't work in the second example anymore.
The macro below will select a random cell, I would like to add a color (green) to the selected cell and add NO/CANCEL to msgbox, when NO is selected it will continue selecting random cell and CANCEL exit sub.
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance 2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
