I'm trying to select a cell in a range that matches the value in a combobox on my userform.
My combobox is populated during userform initialization with all the data in column A.
I want to select the cell that matches the combobox value.
i have a combobox and have A, B, C, as options in the combobox
then I have a table from row 10 to row 50
if A is selected from the combobox, I want excel to show only rows 10 to 20 and hide rows 20 to 50
if b is selected from the combobox, I want excel to show only rows 20 to 30 and hide rows 10 to 20 & 30 to 40
if c is selected from the combobox, I want excel to show only rows 30 to 40 and hide rows 10 to 30 & 40 to 50
in other words, i want all rows 10 to 50 hidden at all times, until a selection A, B, C is made in which i want thoes related rows to be shows and all other rows between rows 10 to 50 hidden.
I have two questions.
1). I have dates listed in excel (01/01/2006 to 12/31/2006) say from range B12:B376.
How do I get these values to a ComboBox.
2). If the above is possible and if I select a value in ComboBox say 08/07/2006, it should get updated in a particular cell say A1
So selection of 08/07/2006 in ComboBox, should reflect 08/07/2006 in cell A1.
Note: This ComboBox is on the UserForm and not on the Excel Sheet.
I am getting close to finishing the drop down menu capability when filling in column L in tab Transactions. However, there is a snag. When I enter part of account say "fin" (the important part here is that the part of the word should not be the beginning of the account name) - then I select an account from the menu - but it does not stay in the cell if the part of the name is the beginning of the account name - all is fine.
View 4 Replies View RelatedUsing VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
I have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
How can I change the font color or highlight cell A1, when I select cell A2. Cell A2 is still blank, no value entered yet. I also would like cell A1 to return to original font color or no hightlight when cell A2 is no longer selected (active), whether a value is entered or not in cell A2. Let me clearify, (A1 thru N1) and (A3 thru N3) have diferent dates and the font color is white, as is the cell too. Therefor you can not see the dates in (A1 thru N1) or (A3 thru N3).
However, when any cell (A2 thru N2) or (A4 thru N4) is selected (example A4), the cell above it (cell A3) changes font color or highlights, so the date can be seen in (A3). But when cell (A4) is no longer selected the above cell (A3) hides the date (changes back to white font on white cell). Data or a value is not necessarily entered into (A4) for (A3) to change. (A4) is only selected to show the date in (A3). But if data or value is entered into (A4), the date in (A3) will still be seen until (A4) is no longer selected/active.
how can i select the cell to the right in a macro? i want to runa command in the cell to the right of the one i'm in after a caommand has taken place there
i.e.
1st command run in col b following by selcting the col c and running another command there
I want to copy every other cell in a row that isn't blank to another sheet. I am able to copy every other cell by using
=INDEX(Sheet1!$A1:$J1,2* COLUMNS($A$1:A$1)-1)+1) f
From this thread, by specifying a very long range. But the problem with this is that cells in sheet2 are filled with zeros when sheet1 has empty cells. I have to export the excell file to csv, I don't wan't trailing zeros or ,,,.
I wish to use an InputBox to select one cell in a row and then insert an entire row at that position. What is the VBA code to do this?
View 2 Replies View RelatedI am sure this has been asked -and answered- before.
I need to select a cell, e.g. C1000, and change the view, so that I see C1000 on top of my spreadsheet.
range("C1000").select clearly does not accomplish what I want.
I currently have
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Target.Address = "$H$1:$K$1" Then
Call FINALIZED_BY_QC
End If
End Sub
In my sheet code. In a macro I have some code to unlock these cells
Code:
Range("$H$1:$K$1").Select
Selection.Locked = False
But the code is trying to select these cells and run the macro. At this point I just want to simply unlock the cells not select them...
I just want to grab the information in C1, then select cell E1, find next blank cell in that row and paste the information. It keeps giving me a runtime error on the line that tries to find the next empty cell.
Code:
Private Sub CommandButton1_Click()
Range("C1").Select
Selection.Copy
Range("E1").End(xlToRight).Offset(0, 1).Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
End Sub
I have been searching for a way to select the next blank cell in excel. I just cannot get my code to work. Here is what I have so far:
Windows("Maintenance MCS_BP_R2.xls").Activate
Application.CutCopyMode = False
Selection.Copy
Windows("Scorecard.xls").Activate
Range("C2").Select
Selection.End(xlDown).Select
ActiveCell.Offest(1, 0).Select
ActiveSheet.Paste
ActiveSheet.Paste
Application.CutCopyMode = False
Range("C6").Select
I want to paste into cell A1 of Sheet1, but without selecting that cell first. This code works, but it selects the cell:
Range("A1").Select
Sheet1.Paste Range("A1")
I've tried different variations such as:
Sheet1.Range("A1").Paste Range("A1")
or
Sheet1.Range("A1").Paste
but they result in errors.
This should be so simple (I would have thought), but so far I'm struggling.
Using Range / Offset or something similar, I want my macro to select a certain cell (which is dependent on the data in another cell) on my worksheet so that the user can then input data into the chosen cell.
Something along the lines of:
Range("A1").Offset(23 + t4, 1).Select
[where cell t4 contains a number which dictates how many lines down I want it to jump]
My data I need to copy begins as always from cell A5 and keeps going till A16.
I need to copy this data but only from A5 to A15. I always delete the last cell.
The number of rows is not always the same. Sometimes my data runs till A26.
How can I copy this data except the last row?
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
The purpose of the excel sheet is hour administration. In the first page you fill in which group it is about, what week it is about and the amount of hours to change.
There are several other sheets named after the group that are filled with some kind of agenda.
An example: I want to make a change to the amount of hours group X will be there in week 3. I fill out the 3 columns (Group, Week, Hours) and hit a button. It should now check those 3 columns for data and modify the hours for the correct group. It is not done yet but I'm running into a problem already, the function I use to find the row with the correct weeknumber in the Group sheet returns wrong numbers and I don't know why.
VB:
Private Sub CommandButton2_Click()
Dim Week As Integer
Dim WeekRow As Long
Dim Groep As String
Dim Uur As Integer
[Code] ....
What I am expecting to happen is this: It checks A1, B1 and C1, selects the correct sheet, executes the function FindRowByValue (the week number is in column B) and fills Week Row with the result, then returns to the original sheet, gives a debug message and repeats this 5 times.
The debug message shows that the Week Row is not returning the row with the week number I filled in but instead returns either the week number itself (so if I wanted to find week 5 it returns a 5, while week 5 is in row 28), or a different number that is incorrect.
So I am creating a board game in excel. I currently have a draw card feature to draw random cards. I also have section above where you can fill in the answer to the question and another 2 sections that flip to correct or incorrect. Those formulas work as =IF(AND(Sheet1!J6="When resubmitting the claim to another insurance should you be voiding an adjustment to the S code if one is posted?",Sheet1!I2="Yes"),"That is Correct!"," "). I have another for if Sheet1!i2="no" then it flips to that is incorrect. I want an OR formula that will be like if multiple cells have any text in them it will display them but only one cell at a time. So essentially a way for multiple questions to be able to be drawn and you can answer those questions and be told if they are correct or not.
View 14 Replies View RelatedI'm using Excel 2003 and I have a small problem using text functions. My problem is that in column 'A' I have a name and their year next to it between brackets, like so: Wright Jeffrey (1PBSO)
Now what I have to do, is make two new columns where I extract the surname (Wright) to one columns and the first name in another column (Jeffrey), the "(1PBSO)" doesn't have to go anywhere. Now I wouldn't have a problem with this normally but in the list I have names like 'Van Tongerloo Johan' where VAN TONGERLOO is the surname and JOHAN is the first name. For the first name (Wright Jeffrey (1PBSO)) I just used the LEFT function and then searched for the first space in the string but that doesn't work in the second example anymore.
The macro below will select a random cell, I would like to add a color (green) to the selected cell and add NO/CANCEL to msgbox, when NO is selected it will continue selecting random cell and CANCEL exit sub.
[Code] .....
I putting together a spreadsheet that applies Payments (as they come in) against the oldest open invoice. As payments come in, old invoices are closed out. An aging is done and late fees are applied.
I have made a macro that inputs all of the information of the invoice in a list. However, when a payment comes in, I am trying to write a macro that:
1) in column G - Finds the first non-zero balance
2) Applies the payment amount to that open invoice. If there is additional funds left over after the satisfaction of that invoice, I would like the payment to be applied to the next open invoice until all the funds of the payment have been drained.
I am having so much trouble trying to even just locate the first nonzero balance and select it.
I'm after a bit of programming which selects the same cell on the next sheet that I have already selected.
So, If I'm on Sheet1 and I have G5 selected, when I change Sheets to Sheet3 for example, I want it to select G5 on Sheet3.
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to.
If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me.
Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows).
I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.
how (in VBA) to select a range within a column where all values are the same?
For example, given the following:
A B
1 ID Value
2 1 A
3 2 A
4 3 A
5 4 B
6 5 B
7 6 C
How would I select range(B2:B4) where all values = A?
I have a comparison macro that compares one sheet with the next, it is called sub comp1 (). There is a condition whereby columns must be removed before sub comp1 can run. To remove these columns I run the macro called sub colcut (). What I need is the following action:
If cell BJ4 of current worksheet = "RE COMMENT" then run sub colcut () followed by sub comp1 () otherwise only run sub comp1 (). FYI The macro is to be run manually via a button rather than triggered by the value of the cell.
I wish to randomly select a cell, using an InputBox, and then delete the entire row that cell is in. Once the row has been deleted the InputBox opens again for the next random cell to be selected.
When finished selecting I wish to cancel out.
I am trying to automatically select data from a different sheet to fill data in a cell based on two other cells. I've attached a simplified version of what I'm trying to do (with detailed explanations). I hope it has enough info to get my point across.
I posted this in the "programming" forum because I'm pretty sure I will need to use vba in some form or fashion to get this to work. I am more familiar with access than excel, so I may be missing some easier way to make excel do this.