Pasting Without Selecting Cell
Jul 24, 2006
I want to paste into cell A1 of Sheet1, but without selecting that cell first. This code works, but it selects the cell:
Range("A1").Select
Sheet1.Paste Range("A1")
I've tried different variations such as:
Sheet1.Range("A1").Paste Range("A1")
or
Sheet1.Range("A1").Paste
but they result in errors.
View 2 Replies
ADVERTISEMENT
Mar 27, 2014
I want to select the dates(from column H) in which the value(in column I) is greater than zero and paste them in column K(Attachment). At the same time, I want to expand each day for 24 hours. That means, I want to repeat the date 24 times while pasting in column K.
View 5 Replies
View Related
Mar 14, 2013
1. I need to paste data that is copied from an internet window into sheet1 without selecting the cell so that I can continue working on a data in sheet5. The macro prevents me from editing sheet5 in an orderly fashion because when it goes to paste the data into sheet1 it selects the cell in sheet1 interupting what I am trying to manually do with the data in sheet5. How to paste data into a cell withou selecting the cell so that my program stops interupting what I am doing in a different sheet?
2. My macro is meant for real-time defect monitoring in a production facility. The macro opens an IE window that contains the defect occurences, copies the data, pastes it in sheet 1 then sheets2 and 3 analyze the data, closes the IE window, and then waits for a time period before repeating the process. This macro is so slow though that it is hard to work on this file while the macro is running. How to run the macro in the background and speed it up so that I can continue working on Sheet5 of the file while the macro repeats itself over and over again? Here is my code.
The variable website is determined by earlier parts of the code that direct the macro to a specific network website.
Sub Half_Hour_Data
1
'Open Internet Window and Navigate to Website
Set myIE = CreateObject("InternetExplorer.Application")
myIE.Navigate Website
myIE.Visible = True
Application.Wait Now + TimeSerial(0, 0, 10) needed to wait until the page loads
[code]....
Is there a way to speed up the macro by removing the timeserials and just telling it to continue when the task is complete. Then run the whole thing in the background so I can work on another sheet while this program runs?
View 1 Replies
View Related
Mar 10, 2014
Using VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
View 1 Replies
View Related
Jun 20, 2014
I have a macro that copies all my sheets onto a new sheet called combine. It is pasting onto the combine sheet starting on cell A2 instead of cell A1. Following is my macro.
Sub Combine()
Dim J As Integer
Sheets(1).Select
Worksheets.Add
Sheets(1).Name = "Combined"
On Error Resume Next
For J = 2 To Sheets.Count
Sheets(J).Activate
Range("A1").Select
Selection.CurrentRegion.Select
Selection.Copy Destination:=Sheets("Combined").Cells(Rows.Count, 1).End(xlUp)(2)
Next
End Sub
View 4 Replies
View Related
Aug 17, 2006
Is it possible to lock in the formatting that would require 12 digits even if someone was copying and pasting to the cell?
We are looking to make our users add information into cells in the format 0-00000-00000-0. They are often copy and pasting, thus overwritting the custom format we have in those cells.
I've looked at validation, but custom only works for a formula.
View 9 Replies
View Related
Aug 12, 2014
I have cells that include phone numbers emails and names and I just want to copy and paste the phone number, how do I do that ;?
View 3 Replies
View Related
Nov 25, 2013
I'm trying to paste the number 1-987654321 into cell A1. But when I click the cell onces then Ctrl+V to paste, it converts the number. It puts 1 into cell A1 and 987654321 into cell A2. I've tried changing the format of the cell to TEXT and GENERAL but that doesn't work. Now I can double click the cell and then paste and that works. My only issue with that is all the other data I'm pasting into the spreadsheet, I'm able to do so by only clicking once. This spreadsheet will be used by 20 people and I'm afraid that if they paste by click once in all the other cells and have to double click to paste in this cell, that it will cause confusion and a headache for me.
View 4 Replies
View Related
Apr 10, 2013
I'm working with the sort of data that spills over into multiple cells if you try to paste it without first putting the cursor in the function window. Is there any way to change this default behaviour (or, alternately, automatically redirect the cursor to the function window every time I hit "enter" and go to the next cell)? I'm working with literally thousands of entries, so the time spent double-clicking and/or manually redirecting the cursor to the function window adds up after a while.
View 1 Replies
View Related
Jun 16, 2014
The follow is the VBA code I have for the process:
Selection.copy
Workbooks.Open Filename:= _
"O:National LinehaulUtilsation reportsUtilsation report - 2014.xlsx"
With Sheets("DATA").Range("B" & Rows.Count).End(xlUp).Offset(1)
ActiveSheet.Paste
I need to copy content from one spreadsheet and then paste it onto another spreadsheet for archiving purposes.
I need the copied selection to paste on the next available line to keep the archiving neat and undercontrol.
View 2 Replies
View Related
Jan 26, 2007
I'm trying to paste columns to the last active cell on another sheet and I'm doing something wrong.
Sub WPRFilterMacro()
'
' WPRFilterMacro Macro
' Filter and copy and paste WPR information into WPR sheet
'
Sheets("Data Sheet").Select
Range("A1").Select
Selection.AutoFilter
Selection.AutoFilter Field:=1, Criteria1:="Work Place Resources"
Range("B2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.Copy
Sheets("Cisco(WPR)").Select
'This takes command activates cell G7 after being on D5, don't know why
ActiveCell.Offset(1, 0).Range("D2").Select
ActiveSheet.Paste
I'm trying to paste this column to the first non-active cell in column D, but the code is taking it down two rows and two columns down, depending on where the active cell starts. I would just start it on a certain cell, but eventually, there will be different starting points.
View 3 Replies
View Related
Sep 15, 2012
I have a large data which is placed in single cell and I want to copy it into a template which is merged cells any I'm stucked. My data is very large and I can't unmerged the destination data(they are merged vertically). So I wonder is there a way to copy a single cell in a merge cell.
View 1 Replies
View Related
Sep 7, 2007
I have just generated a report of current customer numbers for our company. Unfortunately it reports it as "162 (162)". No idea why the program does it like that because it now makes using VLOOKUP very difficult.
What I want to do is copy the "162" part of the cell and paste it into the adjacent cell to make it easier to manipulate the worksheet. All of the customer numbers are in column D if that makes a difference.
View 9 Replies
View Related
Dec 15, 2013
Say I copy "My name is John Doe"
In Cell B2 or D9 or whatever, I want to insert a Comment with it being "My name is John Doe"
How do I make Paste work in Comments?
View 2 Replies
View Related
Nov 28, 2008
I have a template A that has lines on it, sometimes I want to overlay template B which has other lines on it, however when I past template B on top of A the formats of A are overridden by the formats of template B.
Is there any way of "overlaying" B on top of template A without losing the template A formats?
View 7 Replies
View Related
Nov 30, 2011
Im looking to add an update macro button so if A ""
the formula contained in say H2 gets dropped down until it hits were col "A" is blank.
View 1 Replies
View Related
Dec 27, 2011
Objective:
* I want to copy a range that starts at 1 cell immediately to the right of AddressStart and extends for 100 cells wide
* I want to paste 10 rows of this information
* AddressStart will be a variable address such as B2, B10, B1000
Here is my current code (which fails on copy/paste):
Code:
For NewRows = 1 To 10
WSReqs.Range(AddressStart).Offset(NewRows, 0).EntireRow.Insert
WSReqs.Range(AddressStart, Cells(0, 100)).Offset(0, 1).Copy Destination:=WSReqs.Range(AddressStart, Cells(0, 100)).Offset(NewRows, 0)
Next NewRows
Questions:
1) How do I set the relative reference to set the size of width of the row to be pasted?
2) Is it possible to refer to the end of the row (far right)
View 4 Replies
View Related
Jul 12, 2013
Here is what is supposed to happen: when the macro button is hit, today's date will appear in the first blank cell in row 3, then the text "late" in the next cell, then finally "1" in the next cell.
I have been trying to use .end(xlright) but i can not quite get it to work.
View 5 Replies
View Related
Feb 24, 2010
I am making template and trying to preserve formatting when users paste into a cell. From my research, I have found that this is impossible with simple format protection, it works to prevent changing formating, but if something is pasted (with normal paste), the format will change.
I have found a few solutions, but can't get them to work correctly
Solution A: Disable normal paste and substitute Paste Special - Values
How will this work with pasting via CTRL + V and the right click menu? I need both to function.
Solution B: Allow users to paste normally, but use a macro to copy formatting from a hidden sheet
I actually found code for this, but I couldn't figure out exactly how to impliment it. The sheet that users will be pasting into is called "Batch Summary" and I was trying to pull formatting from a sheet names "Batch Summary Format", but was getting an error.
View 9 Replies
View Related
Oct 8, 2007
I want to copy an embedded object and and then paste it on the last used cell. However everytime i do this an error occurs.
Sub last_cell()
Sheets(" Analysis").Select
ActiveSheet.Shapes("Object 10").Select
Selection.Copy
Selection.SpecialCells(xlCellTypeLastCell).Select
ActiveSheet.Paste
End Sub
The error occurs in this line ( Selection.SpecialCells(xlCellTypeLastCell).Select ).
Best Regards
Faisal
View 3 Replies
View Related
Jul 24, 2014
I am trying to cut and paste from a PDF document into excel and a grab of text when pasted sits in three boxes instead of one. How can I manage this?
View 9 Replies
View Related
Jun 4, 2013
Is it possible to preserve original text formatting when copying and pasting only part of a cell. Like, for example, a cell may contain ten words one of which is in red and underlined. How do you copy that one word and paste it in another cell so that it remains in red and underlined?
View 4 Replies
View Related
May 10, 2014
I am trying to create a macro that copies cells B2 and C6 from the active worksheet in a workbook called "transfer". Then searches for the first empty cell in a worksheet called "summary" in a workbook called "report" and pastes the value from B2 in the first empty cell in column D and the value from C6 in the first empty call in column E.
View 4 Replies
View Related
Jun 29, 2014
I am looking at trying to develop a workbook for my job that would make things alot more efficient.
Firstly, I download data from a web based app into excel. I now want to take certain full rows and paste them into another sheet depending if they have certain text in a cell. So i want to search the entire coloumn for a value of "OR" and if this is present copy the entire row into a new sheet ?
View 14 Replies
View Related
Mar 20, 2014
How do I select the empty cell (once located after using the below loop) so I can paste into it?
[Code] .......
View 10 Replies
View Related
Nov 16, 2011
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies
View Related
Jun 10, 2009
VBA to find the next appropriate blank cell in column "A" when copying ranges of varying sizes and pasting them in a new worksheet one after the next.
Currently I have recorded a macro that uses the code below to get to this location, but I am worried this will break when I get new data of a different range size;
Range(Selection, ActiveCell.SpecialCells(xlLastCell)).Select 'my initial range selection
Selection.Copy
Windows("myfile.csv").Activate
ActiveSheet.Paste
ActiveCell.SpecialCells(xlLastCell).Select 'finds last cell of my paste
Range("N69").Select 'I hit the down arrow once to get to new blank row
Selection.End(xlToLeft).Select 'to go to begining/col A of new row for next paste
I have tried playing around with
ActiveCell.Next
but can't get it to work.
View 3 Replies
View Related
Jul 2, 2014
I have a form that loads and depending on the word selected in the drop down the following code loops through cells Q2:AC2 until it finds the word in one of those cells (the word will always be in one of the cells)
Code:
For Each c In Range("Q2:AC2").Cells
If c = period Then
c.Select
[Code]...
The active cell it finds will always change, i know I need something to code the active cell back but I don't know what it should be.
View 5 Replies
View Related
Feb 11, 2010
I have inherited a monstrous speadsheet on which all data appears on a single sheet rather than being broken up across several sheets in some logical fashion.
One portion of this monster is a set of quite a few form letters, each of which reference various cells elsewhere in the spreadsheet.
I want to move all of these letters, together, to another tabbed sheet as a first step in reorganizing the monster.
Simply copying and pasting the cells or columns doesn't work. It fails in different ways depending on which pasting options I employ.
A very simplified version of my problem appears on the 5 sheets of the attached file, with what I hope is just enough further detail about the difficulty.
By the way, I also tried using the "Insert Copied Cells" option when pasting but since this failed with the exact same results as one of the other options I didn't include the results in the example shreadsheet.
View 5 Replies
View Related
Dec 2, 2013
I have a column filled with time data that I want to copy in to a column formatted to a time format (hh:mm:ss), the thing is when i copy the data to it the format does not apply unless i double click each of the brackets, there are 14000 lines so doing it manually is a hastle to say the least, is there a way to apply the time format immediately?
View 2 Replies
View Related