I have a worksheet(sheet1) that contains, among other things, a column of serial numbers . I also have a separate worksheet(sheet2) with one column of the serial numbers I want to find in sheet1. I need a macro that will take the serial numbers from sheet2 and find them on sheet1(there are duplicates too) so I can copy them to yet another sheet(sheet3). I already know how to do the copying, but am lost on the search.
View 3 Replies
I have the following code to search for serial numbers.
Private Sub CommandButton1_Click()
Dim Message, Title, Default, SearchString
Message = "Enter Serial Number" ' Set prompt.
Title = "Find Serial Number" ' Set title.
Default = "" ' Set default.
' Display message, title, and default value.
SearchString = InputBox(Message, Title, Default)
'SearchString = "Rob"
Set S = Sheets.Application
For Each S In Application.Sheets
With S.Range("A1:IV65536")
Set f = .Find(SearchString, MatchCase:=True, LookAt:=xlWhole, LookIn:=xlValues)
If Not f Is Nothing Then
f.Offset(, 3) = Date
Exit For
End If
End With
Next S
End Sub
I would like to amend this so that (a) if the serial number is not found I get a message box saying "Serial number not found" and (b) if the serial number is found, I would like it to highlight the relevant row (after inserting the date).
I want S. No. in Piovt Table like
If I collapse Date then S. No. Main should work. Althought, I'm doing this manually by unchecking blank cell in "S.
Sr.No.Pivot.xlsxMain" and If I expand then Sub S. No. should automatically expand. Is it possible in Excel Pivot Table ?
Manual S. No.
S. MainSub S.# DATE CORES_NO.
1126-Mar-12
227-Mar-12
328-Mar-12
429-Mar-12
251-Apr-12
65-Apr-12
7
8
9
310
11
12
413
14
15
516
I have searched high and low for a macro that can move cell values to other worksheet based on a variable serial number. I have had limited luck with my search but nothing quite reflects my needs. Any help or suggestions would be great. The way that I envision it to work is simple to say but to hard for me to figure out. I must add that I am fair to good with macros; I am using Windows XP and Excel 2003.
Here is the concept:
-I am trying to track several vehicles, their status and there general locations using a variable serial number and an excel macro. The macro would execute the calculated data on sheet “My Taxi Cars” and the results would appear on a separate worksheet called “Location” that is in the same workbook. Please see attached.
-The serial number is comprised of a cell range starting at A2 thru L2 and then concatenates in M2 it would look something like this 123N1110011011. This serial number would allow me to do simple long-range analysis for each of the vehicles. Also in theory at the end of 30-day period I could “replay” my data.
The Breakdown for the alpha numeric serial reads like this:
1) The 123 is the number of the cab.
2) The “N” is for North, etc. and it would equate to a range of cells on a separate worksheet (“Location”).
3) The Ones and Zeros are just simple yes or no answers to the common questions in the Garage at work.
Once the macro is executed the result would be the taxis number (taxi number only, the rest of the number is stripped off) being placed the correct location based off the serial number. I have no idea if this is possible and I would like to thank you in advance for your help. Thanks.
I understand that there are about 1024 different combination's for a binary number that has ten place values. Maybe the answer is to use VLOOKUP or HLOOKUP, but then that changes my analysis scheme. But if you can just help point my nose in the right direction or show me with one example I can take it the rest of the way.
I maintain a class register in Excel to monitor student attendance. The first row shows the date of the class in the form dd-mm.
I need to identify all dates which fall on a Monday and thought that if I custom formatted a new row as "dddd" and enter the formula =DAY(cell ref) into the cells of this new row it would achieve this- I could easily spot the Mondays for the period under review.
What I'm finding, however, is that the formula seems to incorrectly state that 16th September 2008 is a Monday whereas it's actually a Tuesday- utterly bizarre!
I can get a fix simply by modifying the =DAY() formula by adding 1 to my formula [ie =DAY(A1)+1] but am wondering is this a "so called known issue" with Excel or has anyone else come across it? I have never previously come across this and consider myself to be an above average competency level user of the application.
I want excel formula to calculate the sum the value of partused depends upon serialno repeats where repeats of end of serial no i want result at end of every multiple serial no end cell.
View 2 Replies View RelatedI am trying to do with this spreadsheet project,
On the "Master" tab, I would paste in the newest information received from our system weeklywhich is around 2600 rows. I want to then compare the Master sheet to the other tabs and if there is a new Serial Number present in column I, then add that row of data to the next available row at the bottom to the correct tab.
The Orange tabs Fleet Volume PC, Fleet Volume BW, Fleet Volume Duplex will house all countries and all serial numbers but Fleet Volume Color tab will only have Color Serial Numbers for all countries, column J on the Master tab.
So, the same will goes for the USA Volume and CAN Volumes tab, only those serial numbers for that country will falls in these tabs and color only will go in the color tabs. There are 14 other tabs missing from this workbook with other countries, just removed to keep size of file within limits.
From my workbook, rows 29 to 33 on the Master tab are new serial numbers.
Also, I want to highlight the data on the Master, after comparing this Master tab to the other tabs and within the Master highlight in yellow the cells that have new updated information!
I have a excel file to print label on a label printer.I've added additional file in this message.I'm printing different numbers of labels with this file.for example, if I print 10 pieces of labels, I want to write 1/10 , 2/10 , 3/10 etc. on each label.I finded a vb code to print this work but not exactly the way I want.I would ask one of excel guru's to look at my file.
View 8 Replies View RelatedI need a macro to insert a new row with incremented serial number in column A, when done the first time - to insert the row at a specified cell starting with serieal no: 1 and later to insert the new row after the last row. Also I need the macro to insert certain pre-defined text values in specified cells in the new row..
View 11 Replies View RelatedI need to lookup the last date coupled to a serial number but with vlookup it takes the first serial number from the top of the database. Is this at all possible?
View 3 Replies View RelatedI need to convert a date into a serial number. The serial number must return the format DDDYYNN where DDD is the day of the year, YY is the year, and NN is the sequential build number. As an example, if 10 units are built on 2/6/2013, the serial numbers would be 0371301, 0371302 ...0371310. Cell A1 would contain the current date (2/6/13) in this example. Column B1 - B10 would be the sequential serial numbers generated by the formula.
View 3 Replies View RelatedI have been trying to type a date in a column in MS excel. But excel always reads it as a serial number.
How Can I get it to display the date as it is in date format. I have the next column formatted/ formulated to display the day of the date in the previous column.
I have a list of serial numbers for coins I collect. As I collect the coins I wouldlike a spreadsheet where I can enter on a sheet and it will then highlight that serial number from a data sheet I have already created.
I'm having some trouble with copying dates from certain worksheets into new worksheets. When the data is pasted into the new worksheet, the date changes by four years. Somehow, the process of copying and pasting is reducing the serial number by 1462 units (days).
I'm not sure whether this is a bug or a security restriction to prevent copyright breaches. There's a way of getting around it, but I'm curious as to why this is happening. The dates copy and paste correctly into the existing worksheet, but not a new one. An example is attached and the dates are in columns C & D.
Quick question:
If I have a serial date, e.g., 37883, in Excel, how can I convert to 092007, using that exact format?
<snip by admin. Read the rules!>
I have made a Excel base "Application form".....it is a master copy.
I want to send a copy to a client....which has a unique serial / code number e.g. IF/001/2014.....
Presently, I am doing it manually, as application send to many clients...it become a hectic job to remember / note down the serial number....
I am trying to use a "Active X control" button to generate the desired serial number.....
There may be five categories.... IF, IA, OGG, WC, TU respectively.
I want five button to perform this job....
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I need to compare a S/n from a huge amount of datarows in sheet 1 with the s/n in a second worksheet.
If the s/n matches i need to copy the datarow from sheet 1 to sheet 2 next to the data allready existing in sheet 2. This removing the row from sheet 1.
If there is no match found in sheet 2, the row ha's to be copied to sheet 3, this also removing the datarow.
like:
sheet 1:
S/n -- name -- price
sheet 2:
S/n -- place -- stock
if match is found need to become:
S/n -- place -- stock -- S/n -- name -- price
if there is no match found data go to sheet 3.
I have a cell with the following text in it that is being imported from a website "5/1 Smith T win". What i want to do is extract the "5/1" part without it being in the format of a date. I want it to be extracted in the format "?/???". I have entered the following formula to extract the "5/1"
View 2 Replies View RelatedExcel 2010 O/S XP Macro for serial number input all serial numbers have JTC0. Any VBA code to place in macro to have a cursor appear after the four characters in the macro below?
Example: JTC0| < cursor ready for input
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+s
'
ActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "JTC0"
End Sub
I'm trying to create a formula in cell f13 of my attached spreadsheet "Sample 1" that will search the 2nd attached spreadsheet "Sample 2" and return the correct serial number based on both the matching PO # (located in cell E10 on Sample Sheet 1 and in Column 5 on Sample Sheet 2) and Product # (cell A13 on my Sample Sheet 1). My current formula is not returning the correct result and I'm not sure why.
View 4 Replies View RelatedI was just wondering what is the formula to convert a date serial number back to an actual date?
View 1 Replies View RelatedI have a macro which copies the values from one cell to another. But, while copying the macro changes the date format to a serial number and this doesnot happen all the times. Below is the code I have. I want the macro to automatically convert the date from from serial number to dd/mm/yyyy. I tried quite a different ways, but none of them seems to work. Below is the macro I run to copy the contents from one cell to another.
Sub History()
'
' Macro: Backup results from prior rounds. Please run this macro after selecting the cell where the backup is to be done.
'
cur_row = ActiveCell.Row
If ActiveCell.Offset(-(cur_row - 10), 0).Value <> "History" Then
MsgBox ("Check whether the active cell is the designated history cell. History operation failed")
Exit Sub
Else
ActiveCell.FormulaR1C1 = ActiveCell.FormulaR1C1 & ActiveCell.Offset(0, -5).Value & " "..........................
I am currently using these formulas in separate cells.
=IF(ISNUMBER(SEARCH("10AOANAH",'Retail Monthly Data Oct'!C296)),"TYLER OFC","")
=IF(ISNUMBER(SEARCH("10AOANAD",'Retail Monthly Data Oct'!C273)),"DALLAS NORTH OFC","")
I am trying to lookup all "10AOANA..." and return names for each of those number when found
For example
if 1 return Dog
if 2 return Cat
Something like this???
=IF(ISNUMBER(SEARCH("10AOANAH","10AOANAD","10A0ANAG" Retail Monthly Data Oct'!C296)),"TYLER OFC","DALLAS NORTH OFC","DALLAS SOUTH","")
I am trying to workout a formula to look-up and categorize data from a bank statement, without having to complete manually monthly.
So far I have a formula that returns the amount spent, but would need an extra column and separate table for each category.
IF(OR(ISNUMBER(SEARCH(" "&$G$3:$G$11&" "," "&A2&" "))),B2,0) where
Instead of returning B2, I would like to return a value from the table in column H3:H11 that corresponds with G2:G11, as shown below.
ColumnG ColumnH
Aldi Food
woolworths Food
Coles Food
saint Nicholas School
Blooms Medicines, toiletries, hairdressing, personal items
vodafone telephone
So for example if Aldi is in the text in A2, then I would like to return food ( from a lookup table similar to above) into the column where my formulae is ( say F2).
I need to search multiple columns to find a match before I want the result selected which itself will be in a different column.
It seems to me to be an extension of the VLookup function. Attached is an example of the sort of spread sheet I am trying to pull data from. I am trying to get the result of Area 5G, for site ZZ, KPI 2.1, Date Apr-13. As well as the result for Area 5G, Site (empty), KPI 2.1, Date May-13. I hope this is not to convoluted
I want to search for contents of A1 in range of A1:B3 and if it is in the range return Y or N if not there.
View 9 Replies View RelatedI'm having difficulty getting to the result I want using Find or Search. I have a small spreadsheet with data imported from our business system. I need to identify the lines where the Line # is found in the Text column. Using =SEARCH(O2,P2,4), I get the results below. But I want to identify only the entries that are an exact match, not partial matches. Here's a few sample lines:
Line #
Text
Formula Result
What I want
1
77 REFRESH LNS 110,116
16
no
[Code] ......
I have a drop down list in cell C6 which I can choose names that look like this: John Doe 1
There can be a 1 or a 2 at the end of each persons name. I would like a formula to search for the 1 and return a blank cell, or search for the 2 and then divide cells E10 by C10. Can someone help me do this?
I've been using this site mostly for tid bits of code for VBA macros for the past few weeks. One that I was looking at and could really use doesn't seem to be working. I will be the first to tell you I have ZERO idea how to program macros, I just use them. So I was wondering if anyone would be able to fix it, or tell me if I should be doing anything other than copy/pasting it and expecting it to run. The code in question is on this page http://www.ozgrid.com/VBA/find-between.htm
From my understanding, it will find cells between a range of given numbers. When I run it I get a "Compile error: Syntax error" message. And it points me to this.
lFound = rStart .Value
Sub GetBetween()
Dim strNum As String
Dim lMin As Long, lMax As Long
Dim rFound As Range, rLookin As Range
Dim lFound As Long, rStart As Range
Dim rCcells As Range, rFcells As Range
Dim lCellCount As Long, lcount As Long
Dim bNoFind As Boolean
strNum = InputBox("Please enter the lowest value, then a comma, " _
& "followed by the highest value" & vbNewLine & _
vbNewLine & "E.g. 1,10", "GET BETWEEN")
If strNum = vbNullString Then Exit Sub
On Error Resume Next
lMin = Left(strNum, InStr(1, strNum, ","))......................
