I have a excel file to print label on a label printer.I've added additional file in this message.I'm printing different numbers of labels with this file.for example, if I print 10 pieces of labels, I want to write 1/10 , 2/10 , 3/10 etc. on each label.I finded a vb code to print this work but not exactly the way I want.I would ask one of excel guru's to look at my file.
View 8 RepliesI have this question for indentifying the last row (number) for each and every page to be printed.
As I am using a loop to determine the last row of the table in each print page, I am only able to do in "hard coded". And with this "hard-coded" row number, I can set bordering to the table so that table will not be printed without any border (for in between pages if table is more than a page)
But the problem is that I had discovered that once any other user start using wrap text, or even change the row height, the macro will still captures the pre-determined no. of rows to do the bordering (as shown in my code).
In my, I had restricted the zoom size so that the quotation will always be the same format. Hence, based on this control zoom, the printable page changes if the row height changes too.
With destSh.PageSetup
.PrintArea = "$A1:$H" & LastR
.PrintTitleRows = "$1:$21"
.Zoom = 62
' .FitToPagesWide = 1
' .FitToPagesTall = 8
.PrintErrors = xlPrintErrorsDisplayed
.RightFooter = "&8Last Saved : " & _
Format(ThisWorkbook.BuiltinDocumentProperties("Last Save Time"), _
"yyyy-mmm-dd hh:mm:ss")
.CenterFooter = "Page &P of &N"...................
I have a selected area which I print as labels.
I want to have a number on this label preferably counting back from the quantity of print.
So if I select 300 copies to print, the first label shows somewhere 300, the 2nd label 299, the third 298 and so on.
I use a button and macro for printing selected labels, so perhaps the reverse printing could be added there if only counting up is available.
Also to make it easier, a cell on the sheet can contain the number to count down from (this is preferred on thinking about it) So I could then print 20 labels from 300 to 280 say.
Is there a way to 'lock' a page from being changed once it has been printed? It can be printed multiple times but want it to not be able to be edited once it has been printed. Thinking I could have a control button on the page maybe and once it has been checked ok to print then click the button and it saves it as is and uneditable?
View 3 Replies View RelatedI have spent some time looking through the forum and even looked at Microsoft Excel help file and cannot seem to get exactly what I need. I have worksheets that I found the code on this site that I can put page breaks every so many rows. I have it set for 26 so it will break for every 25 counting the header. Here is the
Sub PageBreaks()
For I = 27 To 760 Step 25
ActiveSheet.HPageBreaks.Add Before:= Range("A" & I)
Next I
End Sub
The problem I am having is when I print the first page it has the headers in them, for example.
LastName, FirstName, StuID, GrdLvl
How can I get a row placed right after each page break with with the column headers so each sheet I print will have the headers with the 25 rows of informatio. But then not be there after I print so If I need to sort I won't have a problem with all the headers.
Is there a way I can display the total of a column on each printed page?
I have a table which is about 6 columns long but is hundreds of rows down. I would like the total of one of these colums to be displayed on every printed page. Is this possible?
Cell 1A = Lot# Cell 1B = Last Name Cell 1C = First Name Cell 1D = Phone. I need Row1 to be repeated on each page. The list has about 200 names. We live in a senior community so the list changes quite often.
View 3 Replies View Relatedis it possible to make row 1 the (headingline) top of every printable page? office excel 2007 by the way
View 3 Replies View RelatedTrying to figure out the width of a single line of printed characters for Landscape v. Portrait (obviously the margins would change this).
View 3 Replies View RelatedFirst, all charts are complete and visible in Excel, the problem is Printing. This is very hit-and-miss as to how many spanned pages can be printed.
Sometimes I can span over 4 pages, other times I can't do 1.5
The only think I can think of is some kind of memory issue - either Excel, Printer, or Windows. However, that is not obvious either.
In my header I am trying to show the current page number and the total number of pages in the workbook. So if I have 10 pages in my workbook, page 5 would read "5 of 10".
I have this in my header "&[Page] of &[Pages]". All worksheets with 1 page read "1 of 1" and worksheets with 2 pages read "1 of 2" on the first page and "2 of 2" on the second page.
I would like to print a excel sheet and each time I print this sheet
a new number would be place on that printed sheet.
Like a invoce number.
So if I would print 50 sheets it could be number from 1 to 50 on each sheet
or if I printed 10 sheets it would be number from 1 to 10?
I would like to test for the number of pages that will be printed. Is there any way to do this with Excel VBA?
View 3 Replies View RelatedI have a macro that prints all documents that are found in a directory, i was thinking that it should be possible to modify this macro to count both number of documents as well as the pages that are printed, and display the count once the documents are sent for printing.
The Code:
Start of Code:
Sub ListDocNamesInFolder()
Dim sMyDir As String
Dim sDocName As String
sMyDir = "C:My Documents"
sDocName = Dir(sMyDir & "*.DOC")
[Code] .......
I need a method or function that can count the TOTAL number of pages to that will be printed. I don't need anything with HPageBreaks or Get.document(50, ""sheet name"")") for these don't seem to work on my worksheet.
All they seem to do is give me a number lower then the number of pages that will be printed and they are dependent on where the active cell is.
Here is my code that does not work.
Code:
Agreement_Page_Count = ExecuteExcel4Macro("Get.document(50,""Signature Page"")")
and
Code:
Function HowManyPagesBreaks(sSheet As Worksheet)
Dim iHpBreaks As Integer, iVBreaks As Integer
Dim iTotPages As Integer
With sSheet
[Code] ........
Both codes return 2 when there are 3 pages that can be printed. Unless I pause the code select the cell at the bottom of my sheet (it ignores it if I use use a macro to select the bottom cell) and then continue my code.
I've tried it with and without the entirerow.hidden.
Is there a way of bypassing everything and using a marco to open up page preview and getting the total number of page to be printed? I'm using excel 2010
I have a worksheet(sheet1) that contains, among other things, a column of serial numbers . I also have a separate worksheet(sheet2) with one column of the serial numbers I want to find in sheet1. I need a macro that will take the serial numbers from sheet2 and find them on sheet1(there are duplicates too) so I can copy them to yet another sheet(sheet3). I already know how to do the copying, but am lost on the search.
View 3 Replies View RelatedI want S. No. in Piovt Table like
If I collapse Date then S. No. Main should work. Althought, I'm doing this manually by unchecking blank cell in "S.
Sr.No.Pivot.xlsxMain" and If I expand then Sub S. No. should automatically expand. Is it possible in Excel Pivot Table ?
Manual S. No.
S. MainSub S.# DATE CORES_NO.
1126-Mar-12
227-Mar-12
328-Mar-12
429-Mar-12
251-Apr-12
65-Apr-12
7
8
9
310
11
12
413
14
15
516
I have searched high and low for a macro that can move cell values to other worksheet based on a variable serial number. I have had limited luck with my search but nothing quite reflects my needs. Any help or suggestions would be great. The way that I envision it to work is simple to say but to hard for me to figure out. I must add that I am fair to good with macros; I am using Windows XP and Excel 2003.
Here is the concept:
-I am trying to track several vehicles, their status and there general locations using a variable serial number and an excel macro. The macro would execute the calculated data on sheet “My Taxi Cars” and the results would appear on a separate worksheet called “Location” that is in the same workbook. Please see attached.
-The serial number is comprised of a cell range starting at A2 thru L2 and then concatenates in M2 it would look something like this 123N1110011011. This serial number would allow me to do simple long-range analysis for each of the vehicles. Also in theory at the end of 30-day period I could “replay” my data.
The Breakdown for the alpha numeric serial reads like this:
1) The 123 is the number of the cab.
2) The “N” is for North, etc. and it would equate to a range of cells on a separate worksheet (“Location”).
3) The Ones and Zeros are just simple yes or no answers to the common questions in the Garage at work.
Once the macro is executed the result would be the taxis number (taxi number only, the rest of the number is stripped off) being placed the correct location based off the serial number. I have no idea if this is possible and I would like to thank you in advance for your help. Thanks.
I understand that there are about 1024 different combination's for a binary number that has ten place values. Maybe the answer is to use VLOOKUP or HLOOKUP, but then that changes my analysis scheme. But if you can just help point my nose in the right direction or show me with one example I can take it the rest of the way.
I maintain a class register in Excel to monitor student attendance. The first row shows the date of the class in the form dd-mm.
I need to identify all dates which fall on a Monday and thought that if I custom formatted a new row as "dddd" and enter the formula =DAY(cell ref) into the cells of this new row it would achieve this- I could easily spot the Mondays for the period under review.
What I'm finding, however, is that the formula seems to incorrectly state that 16th September 2008 is a Monday whereas it's actually a Tuesday- utterly bizarre!
I can get a fix simply by modifying the =DAY() formula by adding 1 to my formula [ie =DAY(A1)+1] but am wondering is this a "so called known issue" with Excel or has anyone else come across it? I have never previously come across this and consider myself to be an above average competency level user of the application.
I want excel formula to calculate the sum the value of partused depends upon serialno repeats where repeats of end of serial no i want result at end of every multiple serial no end cell.
View 2 Replies View RelatedI am trying to do with this spreadsheet project,
On the "Master" tab, I would paste in the newest information received from our system weeklywhich is around 2600 rows. I want to then compare the Master sheet to the other tabs and if there is a new Serial Number present in column I, then add that row of data to the next available row at the bottom to the correct tab.
The Orange tabs Fleet Volume PC, Fleet Volume BW, Fleet Volume Duplex will house all countries and all serial numbers but Fleet Volume Color tab will only have Color Serial Numbers for all countries, column J on the Master tab.
So, the same will goes for the USA Volume and CAN Volumes tab, only those serial numbers for that country will falls in these tabs and color only will go in the color tabs. There are 14 other tabs missing from this workbook with other countries, just removed to keep size of file within limits.
From my workbook, rows 29 to 33 on the Master tab are new serial numbers.
Also, I want to highlight the data on the Master, after comparing this Master tab to the other tabs and within the Master highlight in yellow the cells that have new updated information!
I need a macro to insert a new row with incremented serial number in column A, when done the first time - to insert the row at a specified cell starting with serieal no: 1 and later to insert the new row after the last row. Also I need the macro to insert certain pre-defined text values in specified cells in the new row..
View 11 Replies View RelatedI need to lookup the last date coupled to a serial number but with vlookup it takes the first serial number from the top of the database. Is this at all possible?
View 3 Replies View RelatedI need to convert a date into a serial number. The serial number must return the format DDDYYNN where DDD is the day of the year, YY is the year, and NN is the sequential build number. As an example, if 10 units are built on 2/6/2013, the serial numbers would be 0371301, 0371302 ...0371310. Cell A1 would contain the current date (2/6/13) in this example. Column B1 - B10 would be the sequential serial numbers generated by the formula.
View 3 Replies View RelatedI have been trying to type a date in a column in MS excel. But excel always reads it as a serial number.
How Can I get it to display the date as it is in date format. I have the next column formatted/ formulated to display the day of the date in the previous column.
I have a list of serial numbers for coins I collect. As I collect the coins I wouldlike a spreadsheet where I can enter on a sheet and it will then highlight that serial number from a data sheet I have already created.
I'm having some trouble with copying dates from certain worksheets into new worksheets. When the data is pasted into the new worksheet, the date changes by four years. Somehow, the process of copying and pasting is reducing the serial number by 1462 units (days).
I'm not sure whether this is a bug or a security restriction to prevent copyright breaches. There's a way of getting around it, but I'm curious as to why this is happening. The dates copy and paste correctly into the existing worksheet, but not a new one. An example is attached and the dates are in columns C & D.
Quick question:
If I have a serial date, e.g., 37883, in Excel, how can I convert to 092007, using that exact format?
<snip by admin. Read the rules!>
I have made a Excel base "Application form".....it is a master copy.
I want to send a copy to a client....which has a unique serial / code number e.g. IF/001/2014.....
Presently, I am doing it manually, as application send to many clients...it become a hectic job to remember / note down the serial number....
I am trying to use a "Active X control" button to generate the desired serial number.....
There may be five categories.... IF, IA, OGG, WC, TU respectively.
I want five button to perform this job....
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎