I need a macro to insert a new row with incremented serial number in column A, when done the first time - to insert the row at a specified cell starting with serieal no: 1 and later to insert the new row after the last row. Also I need the macro to insert certain pre-defined text values in specified cells in the new row..
View 11 RepliesI have searched high and low for a macro that can move cell values to other worksheet based on a variable serial number. I have had limited luck with my search but nothing quite reflects my needs. Any help or suggestions would be great. The way that I envision it to work is simple to say but to hard for me to figure out. I must add that I am fair to good with macros; I am using Windows XP and Excel 2003.
Here is the concept:
-I am trying to track several vehicles, their status and there general locations using a variable serial number and an excel macro. The macro would execute the calculated data on sheet “My Taxi Cars” and the results would appear on a separate worksheet called “Location” that is in the same workbook. Please see attached.
-The serial number is comprised of a cell range starting at A2 thru L2 and then concatenates in M2 it would look something like this 123N1110011011. This serial number would allow me to do simple long-range analysis for each of the vehicles. Also in theory at the end of 30-day period I could “replay” my data.
The Breakdown for the alpha numeric serial reads like this:
1) The 123 is the number of the cab.
2) The “N” is for North, etc. and it would equate to a range of cells on a separate worksheet (“Location”).
3) The Ones and Zeros are just simple yes or no answers to the common questions in the Garage at work.
Once the macro is executed the result would be the taxis number (taxi number only, the rest of the number is stripped off) being placed the correct location based off the serial number. I have no idea if this is possible and I would like to thank you in advance for your help. Thanks.
I understand that there are about 1024 different combination's for a binary number that has ten place values. Maybe the answer is to use VLOOKUP or HLOOKUP, but then that changes my analysis scheme. But if you can just help point my nose in the right direction or show me with one example I can take it the rest of the way.
Excel 2010 O/S XP Macro for serial number input all serial numbers have JTC0. Any VBA code to place in macro to have a cursor appear after the four characters in the macro below?
Example: JTC0| < cursor ready for input
Sub Macro2()
'
' Macro2 Macro
'
' Keyboard Shortcut: Ctrl+s
'
ActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "JTC0"
End Sub
I have a worksheet(sheet1) that contains, among other things, a column of serial numbers . I also have a separate worksheet(sheet2) with one column of the serial numbers I want to find in sheet1. I need a macro that will take the serial numbers from sheet2 and find them on sheet1(there are duplicates too) so I can copy them to yet another sheet(sheet3). I already know how to do the copying, but am lost on the search.
View 3 Replies View RelatedI want S. No. in Piovt Table like
If I collapse Date then S. No. Main should work. Althought, I'm doing this manually by unchecking blank cell in "S.
Sr.No.Pivot.xlsxMain" and If I expand then Sub S. No. should automatically expand. Is it possible in Excel Pivot Table ?
Manual S. No.
S. MainSub S.# DATE CORES_NO.
1126-Mar-12
227-Mar-12
328-Mar-12
429-Mar-12
251-Apr-12
65-Apr-12
7
8
9
310
11
12
413
14
15
516
I maintain a class register in Excel to monitor student attendance. The first row shows the date of the class in the form dd-mm.
I need to identify all dates which fall on a Monday and thought that if I custom formatted a new row as "dddd" and enter the formula =DAY(cell ref) into the cells of this new row it would achieve this- I could easily spot the Mondays for the period under review.
What I'm finding, however, is that the formula seems to incorrectly state that 16th September 2008 is a Monday whereas it's actually a Tuesday- utterly bizarre!
I can get a fix simply by modifying the =DAY() formula by adding 1 to my formula [ie =DAY(A1)+1] but am wondering is this a "so called known issue" with Excel or has anyone else come across it? I have never previously come across this and consider myself to be an above average competency level user of the application.
I want excel formula to calculate the sum the value of partused depends upon serialno repeats where repeats of end of serial no i want result at end of every multiple serial no end cell.
View 2 Replies View RelatedI am trying to do with this spreadsheet project,
On the "Master" tab, I would paste in the newest information received from our system weeklywhich is around 2600 rows. I want to then compare the Master sheet to the other tabs and if there is a new Serial Number present in column I, then add that row of data to the next available row at the bottom to the correct tab.
The Orange tabs Fleet Volume PC, Fleet Volume BW, Fleet Volume Duplex will house all countries and all serial numbers but Fleet Volume Color tab will only have Color Serial Numbers for all countries, column J on the Master tab.
So, the same will goes for the USA Volume and CAN Volumes tab, only those serial numbers for that country will falls in these tabs and color only will go in the color tabs. There are 14 other tabs missing from this workbook with other countries, just removed to keep size of file within limits.
From my workbook, rows 29 to 33 on the Master tab are new serial numbers.
Also, I want to highlight the data on the Master, after comparing this Master tab to the other tabs and within the Master highlight in yellow the cells that have new updated information!
I have a excel file to print label on a label printer.I've added additional file in this message.I'm printing different numbers of labels with this file.for example, if I print 10 pieces of labels, I want to write 1/10 , 2/10 , 3/10 etc. on each label.I finded a vb code to print this work but not exactly the way I want.I would ask one of excel guru's to look at my file.
View 8 Replies View RelatedI need to lookup the last date coupled to a serial number but with vlookup it takes the first serial number from the top of the database. Is this at all possible?
View 3 Replies View RelatedI need to convert a date into a serial number. The serial number must return the format DDDYYNN where DDD is the day of the year, YY is the year, and NN is the sequential build number. As an example, if 10 units are built on 2/6/2013, the serial numbers would be 0371301, 0371302 ...0371310. Cell A1 would contain the current date (2/6/13) in this example. Column B1 - B10 would be the sequential serial numbers generated by the formula.
View 3 Replies View RelatedI have been trying to type a date in a column in MS excel. But excel always reads it as a serial number.
How Can I get it to display the date as it is in date format. I have the next column formatted/ formulated to display the day of the date in the previous column.
I have a list of serial numbers for coins I collect. As I collect the coins I wouldlike a spreadsheet where I can enter on a sheet and it will then highlight that serial number from a data sheet I have already created.
I'm having some trouble with copying dates from certain worksheets into new worksheets. When the data is pasted into the new worksheet, the date changes by four years. Somehow, the process of copying and pasting is reducing the serial number by 1462 units (days).
I'm not sure whether this is a bug or a security restriction to prevent copyright breaches. There's a way of getting around it, but I'm curious as to why this is happening. The dates copy and paste correctly into the existing worksheet, but not a new one. An example is attached and the dates are in columns C & D.
Quick question:
If I have a serial date, e.g., 37883, in Excel, how can I convert to 092007, using that exact format?
<snip by admin. Read the rules!>
I have made a Excel base "Application form".....it is a master copy.
I want to send a copy to a client....which has a unique serial / code number e.g. IF/001/2014.....
Presently, I am doing it manually, as application send to many clients...it become a hectic job to remember / note down the serial number....
I am trying to use a "Active X control" button to generate the desired serial number.....
There may be five categories.... IF, IA, OGG, WC, TU respectively.
I want five button to perform this job....
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I have the following code to search for serial numbers.
Private Sub CommandButton1_Click()
Dim Message, Title, Default, SearchString
Message = "Enter Serial Number" ' Set prompt.
Title = "Find Serial Number" ' Set title.
Default = "" ' Set default.
' Display message, title, and default value.
SearchString = InputBox(Message, Title, Default)
'SearchString = "Rob"
Set S = Sheets.Application
For Each S In Application.Sheets
With S.Range("A1:IV65536")
Set f = .Find(SearchString, MatchCase:=True, LookAt:=xlWhole, LookIn:=xlValues)
If Not f Is Nothing Then
f.Offset(, 3) = Date
Exit For
End If
End With
Next S
End Sub
I would like to amend this so that (a) if the serial number is not found I get a message box saying "Serial number not found" and (b) if the serial number is found, I would like it to highlight the relevant row (after inserting the date).
I need to compare a S/n from a huge amount of datarows in sheet 1 with the s/n in a second worksheet.
If the s/n matches i need to copy the datarow from sheet 1 to sheet 2 next to the data allready existing in sheet 2. This removing the row from sheet 1.
If there is no match found in sheet 2, the row ha's to be copied to sheet 3, this also removing the datarow.
like:
sheet 1:
S/n -- name -- price
sheet 2:
S/n -- place -- stock
if match is found need to become:
S/n -- place -- stock -- S/n -- name -- price
if there is no match found data go to sheet 3.
I have a cell with the following text in it that is being imported from a website "5/1 Smith T win". What i want to do is extract the "5/1" part without it being in the format of a date. I want it to be extracted in the format "?/???". I have entered the following formula to extract the "5/1"
View 2 Replies View RelatedMy first sheet shows the data - a list of audits and their current status.
AuditStageAlphaIn ProgressBetaReportingCharlieCompleteDeltaCompleteOmegaPlanning
I've then used a simple count formula to add up the number by each stage and it's these numbers that I want the macro to use when determining how many rows to input.
Complete2Reporting1In Progress1Planning1
A second worksheet hosts the desired output - a simple report template, split into stages for each status type (completed, planning etc.) with the correct number of rows for each.
Completed AuditsCharlieDeltaReportingBetaAudits in ProgressAlphaAudits in PlanningOmega
So, I want the macro to ensure that we have the right number of rows for each stage, as this month will be run on a monthly basis and the stage each audit is at will change, and the number of rows required in each section will also be different.
I'm trying to create a formula in cell f13 of my attached spreadsheet "Sample 1" that will search the 2nd attached spreadsheet "Sample 2" and return the correct serial number based on both the matching PO # (located in cell E10 on Sample Sheet 1 and in Column 5 on Sample Sheet 2) and Product # (cell A13 on my Sample Sheet 1). My current formula is not returning the correct result and I'm not sure why.
View 4 Replies View RelatedMy question is I have an exam and I have recorded all my answers in Column B. And I have pasted in the "Official Answers" on Column C. On my sheet Column C is whited out so I don't see the answers until I am done. I made them visible so I can ask my question. I wrote the formula for Column D "=countif(B3,C3)=1" then it displays True if both the columns match meaning my answer is correct or False if the columns don't match meaning that my answer is incorrect.
how I could make it display the running total or like a total score say in cell D9. So for example in this case it would be 5/6 and /or 83.33%.
I would like to be able to enter a number into a cell, and have it change in increments that I specify in another cell. I would also like to specify the number of copies. For example I would enter 2 into a cell, and specify the number be increased by two for every sheet printed. Then I would input how many copies I want into another cell. Everytime each sheet is printed the number would change from 2 to 4 to 6 to 8 etc. This would be for a specific sheet in which I make running total tags for inventory purposes.
View 9 Replies View RelatedI need a macro that can run a serial# 1 t0 10 (or more or less) with A1 being starting point. Here is my illustration data.
Coloumn:A Coloumn:B
1 IrfanAneeza
2 Scooby Dooby Do
3 Dooby Dooby Do
4 Yaba Daba Doo
However, there is a little kicker in it. The range of coloum:B varies all the time i.e. B:B could be 1 to 10, it could be 1 to 3 etc. Thus, macro should list serial#'s based on the coloumn B:B range of data.
i Am trying to get this project underway and can attempt this manually in excel but will take ages. I was wondering if there is a code I can use. I am trying to get a 7 character alphanumeric serial number for units as a 4(alpha) and 3 numeric number. like say AAAA001 , i want to list on a row all the numbers on a sheet right upto ZZZZ999
View 5 Replies View RelatedThis is in Excel 2010
I have, what I believe a fairly complex request.
I have 3 fields that will be entered manually per row
Frequency in weeks = FQ Example FQ = 4 weeks
Duration in hours = DUR Example DUR = 3 hours
Start Date in Date Format = SD Example SD = 01/15/14
I have a series of columns starting at December 30, 2013. This represents the week of December 30th 2013.
It continues on until I hit the last week in December of 2015 which is 12/28/15
There are multiple rows with the 3 entries listed above (FQ, DUR & SD).
I need a function or macro that takes the Start Date (SD) for the specific row and finds it's location in the series of columns (for the example of 01/15/14, it would land on week 01/13/14). The program would enter the Duration (DUR) in that Column's Row (if that makes sense).
The program would then add the Frequency (FQ) to the Start Date (SD) and look for the next column (or Week) that it would fit in and once again enter the Duration (DUR) in that cell.
It would do this until it hits the 12/28/15 end date.
I was just wondering what is the formula to convert a date serial number back to an actual date?
View 1 Replies View RelatedI have a macro which copies the values from one cell to another. But, while copying the macro changes the date format to a serial number and this doesnot happen all the times. Below is the code I have. I want the macro to automatically convert the date from from serial number to dd/mm/yyyy. I tried quite a different ways, but none of them seems to work. Below is the macro I run to copy the contents from one cell to another.
Sub History()
'
' Macro: Backup results from prior rounds. Please run this macro after selecting the cell where the backup is to be done.
'
cur_row = ActiveCell.Row
If ActiveCell.Offset(-(cur_row - 10), 0).Value <> "History" Then
MsgBox ("Check whether the active cell is the designated history cell. History operation failed")
Exit Sub
Else
ActiveCell.FormulaR1C1 = ActiveCell.FormulaR1C1 & ActiveCell.Offset(0, -5).Value & " "..........................
I have searched this and other forums for a macro which will insert a "+" (international dialling prefix) character before a phone number in an Excel field with no success. I have tried the "record macro" function without success. Any ideas?
View 10 Replies View Related