Set Column Width By Column Title `

Jul 7, 2007

I would like to run through all the populated columns and set the width of the column based upon the title of the column. Something like. Get last cell (to identify the last populated column.

For each column...
If title (row 1 of the column) = "this" then set width to 15
If title = "that" then set width to 20
If title = "another" then set width to 30
Else autofit the column.

View 4 Replies


ADVERTISEMENT

Adjust Cells Column Width Without Whole Column Width Changing?

May 24, 2012

Is it possible to adjust a cells' column width without the whole column width changing? EXAMPLE...I'm looking to lock rows 1-41 at certain column widths and change the column width as needed from rows 42 and below.

View 4 Replies View Related

Adding Column Widths Of Merged Area To Match Single Column Width

Sep 19, 2012

I needed to match the width a merged area of seven columns to a single column width (for row autofitting). Adding the column unit values and setting the single column to that value produced a significantly narrower width.

The documentation mentions that the column width unit is scaled to the font type and size and the absolute width is given in points.

This is set by the normal style setting in Excel Options or by VBA application.standardfontsize = 8 (in this case).

For instance, ten columns of Arial font 8 at 8.5 units you would think to be equivalent to a single column of 85 units.
In points, the difference is 420 vs. 386.25, or 33.75 points.

Well, the standard character zero has a width at this setting of 4.5 points and 1 unit is 8.25 points, leaving 3.75 points for margins.

Then (10-1) margins allowances time 3.75 points resolves the difference.

Determining the margin allowances is straightforward, and reveals that the gradation with size is stepped by MS design.
For instance, sizes up to 11 use 3.75 points for margins and increasing points for characters (except between 9 & 10).
Sizes 12 through 18 use 5.25 points, 20 & 22 use 6.75, 24 & 26 use 8.25, etc.

I have created a table for this purpose, however I rarely use a "normal" other than 8, so I can probably use that set in programming.

View 1 Replies View Related

Excel 2007 :: Show Tooltip Of Column Width Of When Expand Column?

Dec 2, 2013

I am having a small problem with microsoft excel 2007.the problem is that: my excel 2007 cannot display tooltip of the column width when I keep and drag left mouse

Show tooltip of the column width as attached file.

I also tried many ways to find settings of advance menu. But cannot.

Pic.jpg‎

View 2 Replies View Related

Cannot Set Column Width Past Column 148

Jun 30, 2006

I have a spreadsheet with 198 columns built by VBA procedures. Columns 7 thru 198 contain monthly data, i.e., columns 7 thru 18 contain data for the months of year 1, columns 19 thru 30 contain data for the months of year 2, ...., columns 187 thru 198 contain data for the months of year 16.

I need to set the ColumnWidth for columns 7 thru 198 to 4. I've never had a problem setting ColumnWidth before as I do this (among other things) for a living for the past 8 months. I've tried multiple methods, i.e., Range, Range-by-Range, Column-by-Column, and each one fails at column 149.

View 4 Replies View Related

Fixed Column Width

Jul 22, 2009

I'm trying to create a vb to get all columns on my sheet to have a fixed width.
If I run my sub all columns go back to the set width. But I want the width to reset when the width is changed.

View 2 Replies View Related

VBA Listbox Column Width?

Jun 5, 2012

I want to fill a listbox with n columns so there is no space other than the text in it.

I have tried this:

listbox1.columncount = 2
listbox1.columnwidth(len(activecell.text);len(activecell.offset(0,1).text))

Or:

mystring = len(activrcell.value) or refer to the excel column width

listbox1.columnwidth(mystring;mystring2)

but I get an error message.

Or max of list len or something. The default width is to big and specifying the length could make it to small.

View 1 Replies View Related

Set A Column Width To Some Integer Like 10?

Dec 17, 2012

I set a column width to some integer like 10, and the next time I open the file it has changed to something like 9.89. Is there some configuration that prevents this from happening and leaves my setting alone?

View 4 Replies View Related

Locking Column Width And Row Height?

Jul 22, 2007

I'm creating a map like image with Excel, and I've set the column width and row height to certain dimensions. Now I'm entering in some text into them, and I noticed that when I added in 2 digit numbers, the column width expanded a little bit. I want to prevent this from happening, and still be able to enter in the 2 digit text (since it WILL fit, and it's expanding to keep that extra bit of space).

Is there any way to lock the dimensions?

View 7 Replies View Related

Inserting An Extra Column Width Bar

Aug 6, 2009

the Ruler across the top that allows you to adjust the column widths (A B C D etc). Is it possible to insert another Ruler, further down the same page, to allow you to adjust the column width differently. if so how. On Excel 2007

View 2 Replies View Related

Listbox AutoFit Column Width

Jun 18, 2013

I just want to know how to Autofit Column width of Listbox.

View 12 Replies View Related

Auto Column Width Resizing

Feb 13, 2014

Lets say i type for now...
A1 = USA
B1 = Philippines

and then later
A1 = dog
B1 = cat

Is there a way that the width would automatically adjust even as I change the values of the given cells; meaning, if a word is long, the width will automatically adjust "longer", if a word is short, then it will automatically adjust "shorter".

I know how the "AutoFit Column Width" works but I don't want to press that every time my values change (words becoming shorter or longer).

View 4 Replies View Related

Edit Macro For Column Width

Mar 19, 2012

How would my macro below be edited to keep the column sizes the same as they are in the original sheet?

Sub NewUploadFile()
Workbooks.Add
ThisWorkbook.Worksheets(3).Range("A2:K300").Copy
Range("A3").PasteSpecial Paste:=xlPasteValues
Range("A3").PasteSpecial Paste:=xlPasteFormats
Columns.AutoFit
End Sub

View 7 Replies View Related

Adjust Column Or Row Width With Keyboard?

May 31, 2013

I want to know that can we adjust column or row width with keyboard.

View 1 Replies View Related

Isolate The Width And Length Of Column

Feb 17, 2009

Hello All:

I have the following type information in thousands of cells. I need too isolate the Width and Length from these cells. The width and the length are the two numbers on each side of the "X".

RAPITONE C2 10 X 10 100
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 10 X 10 250
RAPITONE M2 76 EI 42 X 100 ROLL

View 9 Replies View Related

Copying Column Width From Another Sheet

Aug 11, 2009

I have an Excel file where there are multiple people's information on one sheet, and I have to split them out into multiple sheets. So I have written a loop to successfully do that.

However, I need all the sheets to have the same column widths as the original sheet. So after I insert a new sheet and cut and paste the appropriate data, I call another Sub Procedure from my main Procedure to do this. That Sub Procedure looks like this:


Sub MySetColumnWidth()
' Copy the column width for the first 30 columns
Dim i As Integer

For i = 1 To 30
ColumnS(i).ColumnWidth = Sheets("Sheet1").ColumnS(i).Width
Next i

End Sub
However, I am not getting the results I expect. The column widths change, but are not the right sizes, and I have no idea why.

One odd thing I have notice, is that is mind code, whenever I type in:
Columns(i)
VBA automatically changes it to
ColumnS(i)
I have no idea why. I have no code or variables named "ColumnS". I am not sure if this is somehow playing into my problems...

BTW, I am using Excel 2007.

View 9 Replies View Related

Finding Max Column Width Without A Loop?

Jun 28, 2006

I have a range of cells which I wish to print to a .txt document. However, I would like these cells to stay aligned, one on top of the other. I am currently doing that by finding the cell with the widest piece of data for each column, and storing the width that each column needs to be to an array of integers. Then, when printing out the range, I simply add spaces to each piece of data its width is the same as the max column width. I am finding the max column width using the following loop:

'find the width for each column and store in col_width()
For cur_col = 1 To total_cols
'skip the tag switches column
If cur_col <> 3 Then
max_data_width = 0
For cur_row = 1 To total_rows
cell_data_width = Len(Find_String_Diagnostics(diagnostic_range.Cells(cur_row, cur_col)))
If cell_data_width > max_data_width Then.................

View 5 Replies View Related

Freeze Column And Row Height And Width

Jul 18, 2007

I need to freeze the column and row height and width for a specific area in spreadsheet, so that it shouldnt be altered in future from any one using this sheet.

View 3 Replies View Related

Apply Column Width To All The Sheets In Workbook?

Aug 28, 2013

I have a workbook with over a 100 worksheets and need a macro that will apply the following column width to all the worksheets. Col S → 4; Col T → 5; Col U 5.2; Col V → 5; Col W → 4; Col X → 7.5

View 2 Replies View Related

Sheet Protection Column Width Lock

Jan 16, 2014

I am trying to Protect a Sheet to lock the width of just one column. Does the lock apply to all the columns in the worksheet or can it apply to a single column only. I can't seem to get this to lock just one column-if it is possible.

View 1 Replies View Related

Run Macro And Adjust Column Width Range A:Y

May 3, 2014

i want a code to adjust the column A:Y from width

View 9 Replies View Related

Word Wrap VBA To Specific Column Width?

Jul 11, 2012

I have a database in excel, here's some sample data.

When they click the print button in Cell A2, up comes my form

When the print tags button is pressed, my secondary sheet is populated with the cell they clicked on

Now it's using a font, calibri 11, which isn't proportional but I was wondering if there's a way in VBA to "auto" detect the max width and place words on the next row accordingly (like a word wrap). Here's what I need it to look like:

Here's my existing code to place the comments as is:

Code:

entireComment = "Comments: " & Range("P" & i)
.Range("A" & cnt + 11).Value = Mid(entireComment, 1, 33)
If Len(entireComment) >= 36 Then

[Code]....

View 3 Replies View Related

Excel 2010 :: Unable To Set Column-width?

Oct 5, 2012

From one moment to another I am not able to set the column width doing the following: right-mouse-button click (the column) and choose column width and then type in the desired width The column width is not set this way.

Setting the column width by dragging the right side of the column works well. Also double clicking the right side of the column (auto width) works fine.

I think I have pressed a certain key combination (I am not aware of) to activate this behavior.

How can I re-activate/enable the above (1st) mentioned method to change the column width?

View 3 Replies View Related

VBA To Change Column Width After Pivot Is Updated?

Jul 29, 2013

is there a way to save column widths once a pivot table is refreshed..

if not what is the vba code (and on what event procedure) to set the width for columns M to AF set to 13.

View 2 Replies View Related

Format Column Containing Grand Total To Set Width?

Aug 30, 2013

Can I use a macro to format a column that contains the words 'Grand Total'?

When I paste over the pivot it has reduced the column width and since it is all being produced by a macro I dont want to be lazy and do manual formatting.

View 9 Replies View Related

Combobox On Worksheet - Adjust Width Of Column

May 1, 2014

I have got a few combo boxes on my worksheet. But when I adjust the width of the columns the size of the combo boxes changes as well. How can I make it so that the combo boxes stay frozen even though the columns size is being changed?

View 3 Replies View Related

How To Fix Column Width And Save It Before Closing File

May 30, 2002

I am trying to fix the width of a column everytime I open it but I can't. After I have fixed the column width and saved it before I close the file, when i reopen it, the column width will expand. The data source of that column is a real time query. I tried to lock the cell but when i locked it, I can't refresh the data from the query as it is locked. So, is there any way for me to achieve that?

View 4 Replies View Related

Determine Column Width Pixels / Characters

Feb 22, 2008

I looked at a couple pages of Ozgrid solutions for people that were having word wrap issues and decided my issue wasnt related to any of them - my cells are not merged and they are not exceeding 1024 characters. I have a sales sheet with column headings as the name of the product, many of which have long names (but all less than 100 characters). For example, one cell value is "Flow Meters And Regulators 2007" and another is "Sphygmomanometers 2007".

My column width pre-format is 8.43 and after format is 7.86

The only code I use to adjust the row and column size is

With Rows("1:2")
.WrapText = True
.AutoFit
End With
Columns.AutoFit

As you can imagine "Sphygmomanometers" breaks into two lines in the short confines of 7.86 width. How can i get the column autofit to adjust to the full word?

View 4 Replies View Related

Change Column Width And Height In Millimeters Mm

Apr 17, 2008

I have vba code to change column width and height into mm.
The code is taking alot of time to run and then hangs my excel session.
The code below calls two sub routines.

Sub Change()
Dim i As Long

With Application
.DisplayAlerts = False
. ScreenUpdating = False
End With

For i = 1 To 23
SetColumnWidthMM i, 3.5
Next i
End Sub...

View 3 Replies View Related

Sum Cell In Particular Row If Column Title Is Equal To Particular Value

Dec 23, 2013

I am working on a proforma statement, REFER THE ATTACHMENT

A B C D E F G H I J Q
1 jun'14 jun'14 jun'14 jul'14 jul'14 jul'14 Aug'14 Aug'14 Aug'14
2 beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold Beg. Inv Purchas Unit Sold
3 foundation 4 10 11 3 15 13 5 16 18
4 Lipstick 4 10 11 3 15 13 5 16 18
5 Shimmer 4 10 11 3 15 13 5 16 18
6 Powders 4 10 11 3 15 13 5 16 18
7 Nail Lacquer 4 10 11 3 15 13 5 16 18
8 Eye Shadows 4 10 11 3 15 13 5 16 18
9
10
11 Total Purchase for june to aug 2014
12 Foundation ??

this is just an small sample of what i am working on i have got purchases, cogs and ending invenory for 2 years Products wise i want to add purchases for the particular product.
i.e. if for above data i want to find out the foundation purchased through june 2014 to aug 2014 what will be the formula

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved