Excel 2003. User form coding an If statement the "Else" FieldName.Setfocus. The User form has a MultiPage object in addition to the above (setfocus) in a particular field (NOT on the MultiPage object) I want it open to Page2 instead of what ever page it was last closed on. I tried this: MultiPage1.Page2.Enabled
View 2 Replies
I've got a userform with multiple pages, and in my userform initialize sub I set the focus to "combobox1" on "page1". When a user is on page2 of the form and clicks my "ClearData" button, which calls the initialize event, I get a run time error 2110 - "Can't move focus... etc" I would like users to have the ability to clear the form and start over no matter what page they are on.
View 8 Replies View RelatedI have an Excel sheet with several thousand rows. Now I want to create a report using this Excel file such that when I print the Excel File it must be limited to a specific number of row for instance 100 rows per page and at the bottom of that page I want Excel to display the sum of the above 100 rows for one single column. If I do this manually it would take hours therefore I want either a Macro for this or some shortcut to achieve what I am looking for.
View 1 Replies View RelatedI want to make Excel show page breaks automatically when I open a new file. Please tell me how to do that. I tried changing the book.xlt and sheet.xlt files, but to no avail. I am using Excel 2003.
View 9 Replies View RelatedI have a splash page I created and I work on dual screen monitors. Typically I have Excel open on the left monitor and my VBA window (alt-F11) open on the right. If I close my Excel workbook and reopen it, the splash page will always open on the screen that had the VBA window on last. In my case Excel opens on the left monitor and the splash page shows up on the right window. I would like to have the splash page open on the side that Excel opens on (in my case the left side). Wondering if there is some VBA code I can add in my splash page code that would allow me to override this default setting?
View 2 Replies View RelatedWhen I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have the below to check for a numeric entry and when it's not, it deletes the entry, shows a Splash Form for a few seconds telling the user to enter Numeric, and then unloads.
The problem is, on the SetFocus part. I thought that it should put the cursor back into TextBox2 for another entry. It doesn't, in fact the cursor is nowhere to be seen. I have to grab the mouse and click in the TB2 to reenter a number.
Private Sub TextBox2_Change()
'//Check for numeric entry
If Not IsNumeric(TextBox2) Then
Me.TextBox2 = ""
'//Show SplashForm if not numeric
SplashForm.Show
Me.TextBox2.SetFocus
End If
End Sub
if i write the following function on a checkbox,
View 10 Replies View RelatedI have been trying to setfocus to any other object on my userform with absolutely no luck at all?
In the code below I open a dialog box to import a text file (with CommandButton1), if no file is selected the user is prompted, this works fine. However it leaves focus to the textbox and the user would have to click on some other object and re-enter the textbox to open the dialog box again.
I'm having some problems with SetFocus on a user form that I am using. Code is Below.
Dim Answer As Variant
With cboAccount
If .Value "" And .ListIndex = -1 Then
Answer = MsgBox(cboAccount.Value & " is not a registered account, would you like to add it?", vbYesNo)
If Answer = vbYes Then
Load frmNewAccount
frmNewAccount.txtAccountName.Value = frmEnterTransaction.cboAccount.Value
frmNewAccount.Show
If Answer = vbNo Then
cboAccount.SetFocus
End If
End If
End If
End With
End Sub
basically the code asks if the if the answer placed in a cboAccount (combo box) is valid against the list designated to that combo box,
If the entry is not valid a message box appears asking if they would like to add the entry to the valid list if they do not want to do this they can click no and in which case I wan't the focus to be set back to the combo box however currently the setfocus command above does not does not work and the focus is set to the next text box.
I have been working for 8-1/2 hours to get the focus to move to a specified control on my user form if criteria are met in two other controls on the same user form. It's not responding as I expect. I think I know what is happening; I just don't know why.
Situation: I have a user form with the following relevant fields in this tab order - LMonthDay, tbMonthDay, SBMonthDay, LYear, tbYear, SBYear, LTime, and tbTime. I used the designations L, tb, and SB in my control names to represent label, text box, and spin button respectively.
Problem: Once the SBMonthDay control has the focus, if I press TAB without changing the control's value, it does not execute the Exit event statement the way I anticipated. I want the focus to move to the tbTime control when the tbMonthDay & tbYear controls are already properly populated. (They will already be populated for 99% of the entries in this case.)
Private Sub SBMonthDay_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Debug.Print "SBMonthDay_Exit Begin"
If ISLIKE(tbMonthDay.text, "####") _
And ISLIKE(tbYear.text, "####") Then
tbTime.SetFocus
Else: tbYear.SetFocus
End If
Debug.Print "SBMonthDay_Exit End"
End Sub ...........................................
I have a userform with a multipage consisting of 4 tabs.
Each one has several combobox's and 1 commandbutton.
As you move through the form the commandbutton moves the data to my worksheet then moves you to the next page. When it reaches the last page it will return you to the first page then unload the form which is great.
The problem I am having is the cursor is not in any of the boxes on the first page. If I click on one of the other tabs then return to first page the first combobox has the focus. All the tab orders are correct. Can anyone point me in the right direction.
Private Sub cmdNext3_Click()
ActiveWorkbook.Sheets("CarDetails").Activate
Range("A1").Select
Do
If IsEmpty(ActiveCell) = False Then
ActiveCell.Offset(1, 0).Select
End If
I am using a Textbox1_Exit event that (if certain values are true) sets the focus to different Textbox. However, when I invoke the Textbox3.SetFocus, it redoes all the code in the Textbox1_Exit event since it's technically leaving now.
How do I stop this from happening and ensure that the Exit event happens once? OR How do I properly SetFocus inside an Exit event?
I would like point to a cell in a spreadsheet, click a Command Button and copy the content of this cell to another cell, say D30.
View 2 Replies View RelatedI have a project with many textboxes on different forms. On some of the textbox_exits on some of the forms, I call a standard module that checks what the user has input. If the user needs to change the input, a msgbox appears to inform the user the info needs to be changed.
I have tried to use ControlSource, Name etc., But I cannot seem to setfocus back onto which ever textbox the input needs to be changed. I think it has something to do wih the _exit event, but not sure.
How to setfocus on a cell, when user press enter, key up, or tab ?
examp. :
i want setfocus to cell A5, when i press enter or key up on cell A2.
I have two userforms. When the user chooses the choice "Other" in the userform frmTradeSickOther, another userform called frmOther will be called. At this point, the user will enter some required comments in a textbox (called txtOther) and click the "Add Comment" button. If the user does not enter anything, a prompt will inform the user to type something in the textbox.
My problems: Once the user clicks okay to the prompt, frmOther is called back. When it's called back, I want the cursor to blink in the textbox. Eventhough I have SetFocus on the textbox, it does not work. I don't know why.How do I prevent the user from just hitting enter (i.e., accepting blank lines as comments) and bypassing the commenting part. The code below accounts for hitting enter once (i.e., one blank line), but not multiple times. How do I do this?
Here is what I have when the user clicks on the "Other" choice in frmTradeSickOther:
Code:
Private Sub optOther_Click()
Unload Me
frmOther.Show
frmOther.txtOther.SetFocus 'This gets the cursor to blink in textOther when frmOther is called.
End Sub
Here is what I have when the user clicks the "Add Comment" button on frmOther:
Code:
Private Sub btnAddComment_Click()
On Error Resume Next
txtOther.Value = Trim(txtOther.Value) 'This is to make sure spaces aren't accepted as a comment.
If Me.txtOther = vbNullString Then
Me.Hide
MsgBox "Please enter the necessary information.", vbInformation, "Required Field"
Me.Show
Me.txtOther.SetFocus 'Here is where I set focus on txtOther.
Exit Sub
End If
'Everything below is to add comments automatically to each cell when a value is changed.
Application.CommandBars("Cell").Controls("Delete Comment").Enabled = True
If Not ActiveCell.Comment Is Nothing Then
Application.CommandBars("Cell").Controls("Edit Comment").Enabled = True
Range(curCell).ClearComments
[Code] .......
I've got a user form with 12 textbox, one for each month a total textbox number 13 and a 14th text box (TB28) to enter $'s in.
AfterUpdate in each textbox 1-12 posts its value to a worksheet all values are summed in a =sum range which in turn populates textbox 13. When TB13.text = 100.00 it sucessfully calls a number of routines but what I can't get it to do is set focus on TB28.
Private Sub TextBox13_Change()
If TextBox13.Text = "100.00" Then
With FormPhasedAmt.TextBox28
.SelStart = 0
.SelLength = Len(TextBox28.Text)
.SetFocus
End With
End If
End Sub
It returns a Run time error Unexpected call to method or property access highlighting .SetFocus. The rest of the code works OK. Is it because other textbox on the same user form have text highlighted because of the tab order?
In Excel 2000 there seems to be a problem with setting the focus in a UserForm TextBox if the SetFocus method is applied in the same submodule as the UserForm.Show method. Microsoft's circumvention for this is to put the SetFocus command in the form's Activate event submodule.
This seems to work OK except when the TextBox you are applying the SetFocus to is the first control inside a frame. It works if the TextBox is not the first control, and it can be circumvented by first setting the focus on a subsequent control then switching the focus to the intended control.
However, the circumvention is not that useful if there is only one TextBox control in a frame or, as in my current project, if you try to create a generic piece of code to validate controls from multiple forms and set the focus from within the generic code.
Does anyone know of a way over overcoming this problem and being able to directly set the focus to the first TextBox inside a frame?
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies View RelatedI am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View Relatedhow to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?
View 3 Replies View RelatedI need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.
For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.
Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?
For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?
