I have a problem with an file that I have exported from another software program (I believe in CSV). The file seems to be in tekst format but I can not change it to date format. I need to know which weekday is which date. So january 1st is a tuesday and so on..
View 4 RepliesI've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.
It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.
I have a general list from which a chart is created. Column one contains a date series. There are a fixed number of dates in this series (approx 50 or so).
I would like to select a start date and an end date from this list and have the chart display the data from that range.
Typically I would simply create a new list and build the chart from the list, but I'm kind of hoping that I could do it from a single source rather than make mulitple lists.
How do I force the Date and Time format when I import data into an Array that is listed in a listbox?
The desired format is YYYY/MM/DD hh:mm and I do not want to be dependant on the system settings.
I am Using an If statement to check if something has been verified in the last 30 days.
Code:
(TODAY()<=DATE(2011, 9,27)+30,"Yes","No")
Now I would like to create a button that modifies the Date(y,m,d) field to current date. How I could set the y, m, and d to the current values using a button in excel?
i have a variable that will be the same in every module within a workbook. i have tried playing with Global, Public, Conts, etc. but get compile errors.
essentially this is what i want... i just want to set the dte globally so i dont have to set it in each module.
Code:
Global dte As Date
If Weekday(Now()) = vbSunday Then
dte = Date - 2
Else
dte = Date - 1
End If
if cell A1 is the text UA i want the text to have a value of 2, so that if i have UA in A1 and UA in B1 when i add into C1 the answer is 4.
View 1 Replies View RelatedI've got two sheet's in a workbook. The first contains data and is setup with dates in column A, day of the week in column B, and values going across by day in column's C through H. As an example it looks as follows:
View 5 Replies View RelatedI am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have a workbook that I'm using to tracking staffing patterns within a mental health agency. When the workbook opens the user is asked to pick a date range and an office location. I've placed code into the userform that pre-fills the "start date" with today's date and the "end date" 7 days from today's date. I would like the user to be able to enter a unique date range should they wish but I have yet to figure out the coding to accomplish my goal.
[Code] .....
Attached File : Staffing Report 1.90.xlsm
Extract data with differing date formats that I need to convert to something consistent that I can format as a date.
This is an example of data.... all with general format at the moment.
2/28/2013 2:48:53 PM
1/16/2013 10:48:50 AM
12/17/2012 11:59:49 AM
I have used this formula to extract the date portion, but I can't get this to then format as date. How do I convert this to the julian date, so I can then apply a date format?
=LEFT(G9,SEARCH("/",G9)+7)
(The day portion of this date always has a leading zero).
I have these as input entered as text:
January 01, 2011 January 01, 2011 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010 May 12, 2011 June 02, 2010 February 28, 2010
but I need it in this DATE format:
MM/DD/YYYY
I need it as a formula to be entered into a cell in excel (not VBA)
Date:31-Oct-06 (the date is in cell A3)
Formula: "as at"& " "&A3
Result: as at 39021
I need the results to be "as at 31-Oct-06". Is there a formula for this??
I've created a group of user forms used for recording jobs and displaying details of jobs and have come up against a problem I think you may be able to help me with.
When the user creates a new record, I've written some code to stamp txtdate text box with the current system date and this information is then copied onto a sheet called Data into a specific column.
This part works fine and as the column is formatted to handle dates it displays fine.
However, when I pull the data back in, it displays the date as the serial number date, not formatted as dd/mm/yy. I've tried every fix I can find to sort this but none of them seem to work.
The code I use to pull the data in is as follows:
ComboBox1.BoundColumn = 11
txtdate.Value = ComboBox1.Value
The idea is that the user selects a job number from combobox1 and then the appropriate column is pulled into each txt box on the form.
At the same time, I'm trying to do the same for the system time as well. Unsurprisingly I have a very similar problem here and use the same code as above. I've tried formatting both date and time txt boxes in the userform, the data transfer code etc etc with no success.
I am having a problem which I imagine will be fairly simple to resolve but I can't figure it out!
Cell A1 contains a Date eg (01/01/07)
In Cell A2 I want to write a formula that says: Insert 'Warranty' if the system date is within 365 days of the date in Cell A1.
Is there a way to make a cell display today's date as YYYYMMDD?
Assuming data!a2= 7989, I need the following formula to display as shown below
="txt"&data!a2&"txt"&today
displayed as
txt7989txt20080507
I have a macro which will import data to the worksheet, then perform some formatting on the data, then assign the month & job description based on the lookup table. The problem is that when I import in the data, the data in column B&C will be store as text instead of number and the date in column E will store a 2 digit year instead on 4 digit year which cause error to my macro. I have try to preset the column format to number, i even try to change the column format to number when i run the format macro data. But the problem is still there.
View 5 Replies View RelatedI am trying to convert a long list of dates from text to date (see A) so that I can sort them from newest to oldest. I've tried converting them using differnt formulas (see B:C) but these don't work.
View 8 Replies View RelatedI have a column of dates in thie format " January 5 03:09:36 2009" which i need to convert into a proper excel date that i can do further calculations on (adding up things, graphs etc based on dates).
Note the space before the month name. I thought about doing a left(cell,xx) to get it but that isnt going to work with the space infront and the variable length of month names.
I do not necessarily need the time included, it may be useful at some point if its easy to keep it as part of the data, if not i can live without it.
I've been sent a spreadsheet in which one column represents dates, but they have been entered as plain text, MM/DD/YYYY (ie 12/31/2008). I ultimately need to import this as a CSV into a program that only understands dates in the format DD/MM/YYYY.
I'd ideally like excel to recognise this field as containing dates, but I can't figure out how to do that, or even how to swap the days and months around as text. I'm using 2007.
I have some dates in text fomat on a worksheet that I need to convert them to true dates(Value). Here some sample of the text dates: '12/31/2011; Blank space12/31/2011.
Sub CnvtTextDate()
For Each Rng In Selection
Cells.Replace What:=" ", Replacement:="", LookAt:=xlPart, SearchOrder:= _
xlByRows, MatchCase:=False, SearchFormat:=False, ReplaceFormat:=False
Cells.Replace What:=",", Replacement:="", LookAt:=xlPart, SearchOrder:= _
[code].....
Is it possible to use a date formula eg Today() to enter that days date when a blank cell say a1 gets data entered, then not change date the following day?
View 9 Replies View RelatedI've got a spreadsheet that gets its information from outside of Excel. The Date comes across as a number stored as text. I need to some how calculate the amount of days between this imported date (Settlement Date) and Today's date.
View 4 Replies View RelatedI inport date into excel and the dates come in APR/13, however excel does not sort or treat the imported dates as actual dates. if I select the cell it will change the data to 13-Apr-2013...however I want it to be the 1st of the month.
Via a formula how can I change the text from APR/13 to 1-Apr-13, so that excel will sort and treat the value as a date?
How can I add a date stamp that will populate a field when text is entered into another cell but will not change every time I re-open the sheet. I have been using =if(B4="",NOW()) which changes each time though and as soon as text is entered it disappears. I want to capture the actual date that someone enters text into a cell and save that date in another cell???
View 5 Replies View RelatedI import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 Replies View RelatedWhat formula could I use to return the following results.
1, 2, 3,4, 5, 6 = Manhattan
7 through 12 = Bronx
31 = Staten Island
What I want to be able to do is set up a thing that when you're in the excel sheet you click on it. Up comes a box where you can enter data and when you click submit. It puts that data back into excel spreadsheet. I have attached a spreadsheet to show what I mean. I have deleted some stuff that are unnecessary so don't worry about them.
What I need is for you to click a button that will create a new row/copy into the next row, from A9-AH9. Then the button will automatically bring up a box that will ask for Time, Timber, Clay, Iron, Warehouse, Hiding Place and then will enter that data into there respective cells which would be D20, F20, I20, L20, O20, Q20 respectively. That is the main idea. maybe it would be better to have te button come up with a box asking for the information and then will create the row and insert the data. If it's easier you can just do the box with just time or something so it's easier. I can then do the rest.
Tyvm. This to me seems really complicated so not sure how you would do this at all. i've looked at other stuff on the internet but haven't gotten anywhere.
P.S. If you have a more generic thing similar to this then show me the code for that or upload it and I can change it too suite my needs.
This macro was working just fine, now it generates an error on the line in red.
View 2 Replies View Related