Excel 2013 :: Extract Date And Time Info From A Text Cell That Contains Text And Date And Time
Jul 19, 2014
I am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I have a column of times, that are actually dates of 1/0/1900 plus time, from which I want to extract the AM or PM status. I can format it to show this, but it's really just a fraction of a day. I need the actual text "AM" or "PM", not a decimal value.
i currently have a table/template in which external data is pasted... however there are 2 colums titles DATE and START TIME (amongst others) now although where the data is pasted from the information is in the correct format. After the information is pasted both the columns have exactly the same information in them. I'm pretty sertain the only reson for this is that the source the records/data actually comes from formats them on the screen differently to how the records are stored on the database using code....
so after the expanation which hopefully made sense is there any way i could convert a record like this
Thu Jun 28 21:54:33 GMT 2007 (this is how the information is pasted into the 2 columns)
to both
28/06/2007 for the DATE column and 21:54:33 for the START TIME column
the cell format makes no difference because the information is both text and numbers....
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
I just installed Office 2013 Pro. In my Office 2010 Additional Controls toolbox, the control toolbox has a Date and Time Picker(DTPicker1) . I cannot find it in the Additional Controls toolbox in Excel 2013. I certainly hope they did not choose to not make it available in Excel 2013 - this is an extremely important control for my Excel spreadsheets as it allows inputting a date range on a userform with DTPicker1 and DTPicker2 and generating reports using VBA in conjunction with Autofiltering code on a Generate Report button.
I have the the following spreadsheet: [URL] My formula in Columns A to E is the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE))
I would like to do the following in Column A: If the date in Column C is greater than today, then Column A must also say "Branch Not Open". I have tried the following:
=IF(ISNA(VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),"Branch Not Open",VLOOKUP(Query1_2[@Branch],Master!A:J,10,FALSE)),IF(C:C<=TODAY,"Branch Not Open, IF(AND(C:C=>TODAY,VLOOKUP(Query1_2[@Branch],Master!A:I,9,FALSE)))
I am trying to get a single cell to display the following:
Last Updated: 3/18/2008 15:08 (GMT+2)
Entering =NOW() in a cell displays the date and time as required.
But entering ="Last Updated: "&NOW()&" (GMT+2)" displays the date and time as a serial number. Formatting the cell to Date does not change the serial number to date and time format.
The only way I have found to get the desired result is to use =NOW() in another cell (F13), format that cell to general to get the date/time serial number, then use ="Last Updated: "&TEXT(F13,"m/d/yyyy h:mm ")&" (GMT+2)" in the required destination cell.
As I said this works, but it strikes me as an inefficient method. Is there a formula I can enter or formatting I can apply to get the desired result without using an addition cell?
The result needs to be in a single cell. Splitting text and date/time into 3 adjacent cells will not work with my worksheet setup.
i have the following code to insert comments into cells, however if the user cancels the input box (i.e. doesn't insert any text), a comment is still added with their details and the comment 'FALSE'. Is there anyway to stop comments being added if the user cancels the input?
Sub Insert_Comment() Dim iReply As Integer
Dim cl As Range Dim sComment As String Dim sText As String Dim UserNameWindows As String
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
I get one report.xls workbook by FTP. This book contain date and time in cell A14 in sheet1. e.g. 30-04-2006 19:38:00
I need to have macro to extract only time and paste it to cell A56 in same sheet. How can I do that. The date format is 30-04-2006 19:38:00 and it may be 05/05/2006 7:15 am. Or it could be any type of date format. Please send me how can I work with different date and time format to extract the only time and paste to other cell.
I am trying to convert text in a cell from: 03/08/2014 2330 to a date that looks like this: 03/08/2014 23:30. Then I also need to extract just the time only and put that in a new cell.
I can do it in a few steps by using Data -> Text To Columns, formatting the date and time separately, and then putting them back together again.
Is there a 1-step way to do the original text to date/time conversion?
I am try to get a space between the date and time but just can't get it. This code is entering the date and time in a textbox on a user form. I really don't need the Seconds at all.
This is what im getting in the text box. 11/23/20137:41:30 PM This is what I would like. 11/23/2013 7:41:30 PM
This is the code I am using.
Private Sub UserForm_Initialize() edate1.Value = Format(Date & Time, "mm/dd/yyyy") End Sub
I have a long date and time text value in a cell such as "2013/10/02 07:43:39.39", where the fractions of a second are very important.
I can use cdate([text]) to convert the text string to a value, but only if i omit the seconds fraction: "2013/10/02 07:43:39". Otherwise i get a type mismatch error.
Is there any way i can get the whole date/time string converted to a date value? The only way i can think to do it it at the moment is to convert the date/time, then divide the seconds fraction by 86400 and add the 2 values. Is there a better way?
Secondly, i have a large number of these date strings, typically >30k lines x 7 columns. Each string is preceded and trailed by a [space] character.
I can strip these extra spaces no problem. And, i can "loop" to perform it, again no problem. But it's going to take time to perform and i'd rather not if i can avoid it.
I'm copying data from another source to excel, and for certain date entries they come as text in the following format "On 14 May at 8:00". Is there anyway to convert multiple entries like this into a standard date format? With or without time is fine - just the date will do.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize() If Not Range("dDate").Value = "" Then TextBox2.Value = Range("dDate").Value TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM") Else TextBox2.Value = "" TextBox2.SetFocus End If End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I am trying to find a way to have excel recognize text data input as date/time.
[Code] .....
Where 02 Is the Date, 2020 is the time (military) Z is Zulu/GMT, MAR is Month and 14 is Year. I believe excel recognizes
[Code] .....
But I have a spreadsheet (on a confidential system) with thousands of entries that I need to convert. Also, the people I have working for me are not remotely. I reject the idea of entering data that way.
I am also trying to keep the display the same format: ddhhmm"Z" MMM yy
I think there's a way to use Excel to automatically create a 5-day calendar. Maybe a macro?
The date format must be dd/mm/yyyy hh:mm and it must be in text format. If its June 9, 2012 at 6pm - the correct format is: 12/06/2012 18:00
I want to post 5 times a day: 09:05, 9:55, 10:45, 16:55 and 18:00.
Column A is where the date and time goes. Ideally, I'd enter in A1 the start date and then run a macro that would automatically populate the next 5 consecutive days with the specific times above (so 25 rows total in column A).
I have to save the file as a csv file, so the date and time format has to be in text or I'll get an upload error in Hootsuite.
