I have 04/02/08 12:00:01 AM (mm/dd/yy hh:mm:ss AM/PM) in text format in a cell. I need to convert this to date/time custom format as given above so that I can make comparisons with NOW() output.
View 2 RepliesI have loaded a .csv file in which the first column contains date/times, e.g. 01/12/2012 00:00. How do I now tell Excel (2010) that this is in fact a date/time format? If I select one or more of the cells, click on the Number dialog box launcher and try to pick a suitable format tghe cells resolutely refuse to budge from being text (i.e. left-justified, still allows me to edit the 'seconds' component to a number > 60). Also which data type should I be using? The only one that appears to have a full date/time format listed is Custom (not Date or Time).
View 4 Replies View RelatedI am using Excel 2013. Anyway, the first issue is that I need to pull a date and a time period from text. So, for example, if I see something like Sunday Prime Time 7/6/14 8:37PM, I would want to pull ONLY the "7/6/14 8:37PM" out of it. Each text box could potentially be different, so it might not always be in the same format as "Sunday Prime Time 7/6/14 8:37PM" it might only show just the date and/or the time without all the extra text i.e. 7/6/14 8:37PM. Some of the cells will have text, others might only have just the time or even just the date and the time. The only thing that I am worrying about in each cell is extracting just the date and time. If this is too much to ask of excel, I would be ok with extracting ONLY the time - 8:37PM and not the date, but I would much rather be able to get both the time and date.
THEN, onto part two of my question. After I would pull the dates and times, I need to compare them with each other. So, when I have the same date with two separate times on that date, I need to write a formula to show if those times on that date are less than 30 minutes apart. So, if I have 6 times on 7/6/14, I need to know if any of them are less than 30 minutes apart.
I would need to have the formula say something like "Problem" if the times on 7/6/14 would be 5:30PM, 5:48PM, 7:00PM, 8:00PM, 8:15PM, and 9:00Pm for example. I would like to see the word "Problem" since 5:30PM and 5:48Pm is only 18 minutes apart, and "Problem" after 8:15PM since that is only 15 minutes past the 8:00PM which is obviously under 30 minutes. The times that are more than 30 minutes apart such as 7:00PM and 9:00PM for example are more than 30 minutes apart from any of the other times that were extracted.
I have a long date and time text value in a cell such as "2013/10/02 07:43:39.39", where the fractions of a second are very important.
I can use cdate([text]) to convert the text string to a value, but only if i omit the seconds fraction: "2013/10/02 07:43:39".
Otherwise i get a type mismatch error.
Is there any way i can get the whole date/time string converted to a date value? The only way i can think to do it it at the moment is to convert the date/time, then divide the seconds fraction by 86400 and add the 2 values. Is there a better way?
Secondly, i have a large number of these date strings, typically >30k lines x 7 columns. Each string is preceded and trailed by a [space] character.
I can strip these extra spaces no problem. And, i can "loop" to perform it, again no problem. But it's going to take time to perform and i'd rather not if i can avoid it.
I import data from a program that exports dates and times as text. I have been successful using "text to columns" to separate the time from the date and then using =text(A1,"00:00")+0 to get the time to show as serial time but I'd love to be able to do the whole date/time string in one step. In cell A1 there is data that is general format and is in this format:
01/01/13 00001
No matter how you try to format it, it is not a date or time. For this project I need the serial number for the date/time. Any formula that will format it as date/time and then allow it to show as a serial date/time?
I have an 8 character number that I am trying to segment and change into a date.
The current format is: YYYYMMDD, for example 20071003 (today's date)
I am would like to change it to read 10/03/2007 or another easily identifiable date format.
I have a spread sheet with a date colume that reads: 2012-06-27-19 I need to have this read like 06/27/2012 but nothing I do is working I have tried to go to the formatting process and backing the hr:mm out and that doesn't work. I really don't want to go line by line to manually correct this issue.. HENCE ... over 2000 lines
Second question: If I have a column that reads 02/15/2012 and another column that reads 3/27/2012 how to a format a 3rd column to make it read total number of days between 1st date and 2nd date?
I'm trying to write a VBA code for converting the date/time as text to a date/time value.
The scenario is, I have three different types of text :
ddmmmyy
HH:MM
ddmmmyy:HHMM
I could have the code working fine with the first two types, but not the last one.
I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I want to display a date and time in local time, is there a simple formula to do this?
View 3 Replies View RelatedI have a coloumn of cells in the format Dec 12 2005 07:04 PM
I need to convert them to the format 12/12/2005 19:04
Here is the code I'm using
C5=IF(H5="X",NOW(),"")
C6=IF(H5="Y",NOW(),"")
C7=IF(H5="Z",NOW(),"")
Now H5 can be three different things, and all three different things are linked to three different cells. Once one cell gets populated with a date in this case is there a way to then have that cell stay populated even when H5 gets changed?
how to convert number to data time format:
eg. I have number 20121231230000 and I need its conversion to 31/12/2012 23:00.
I have tried to use fucntion date with left, mid, right but still I do not know how to extract time.
I have a column of values resulting from subtracting a static date and time from the current date and time.
This means it is constantly updating, which makes it impossible to sort.
All my work depends on sorting those values, though.
I have cells of data with a long string of numbers such as: 20090507225836. Is there any easy way to convert them to date/time format, such as below? 5/7/2009 22:58:36
View 5 Replies View RelatedI am pasting a large amount of data from a sql server query into excel. There is multiple tables output in each query. Some of the data is date/time and excel is formatting all of these cells to time. The date/time cells to not neatly line up in any row or column, so I cannot just format any give column or row. I need a macro that will find all of the cells that are formatted as time and change them to a date format.
View 7 Replies View RelatedI use software that exports date/time stamps in the format of: MM/DD/YYYY hh:mm:ss.s
I like to keep the data in this general format so that we can keep it consistent and it can be useful to others using other software.
I recently had to do some date/time stamp manipulations where I added 61 days to a dataset because the data was erroneously set to a diferent calendar. (Still don't know how that happened but it isn't relevent to this issue) When I set up a formula to add 61 days, it appears that it automatically converted it to the excel serial date/time format before adding the 61 days. Now I have a column of data that is mostly general format but has this portion in serial format. How can I get the serial format changed back to general so that the entire column is in the same format?
What is the code i need to use to assign a macro to a command button which inserts the current date and time in the selected cell regardless of where that cell is?
View 5 Replies View RelatedI have a sheet with a list of dates in it that I wish to format to show the day as well as date and time. I am trying to do this automatically with a macro, below is the before and the desired after.
Before
Format - dd/mm/yyyy hh:mm
Appearance - 29/03/2009 00:30
After
Format - ddd dd/mm/yyyy hh:mm
Appearance - Sun 29/03/2009 00:30
This works fine when I format the cells manually, but when I try to format them via macro '29/03/2009 00:30' becomes 'Sun 29/03/2009 12:30' which is obviously a totally different time! Has anyone got ay idea why it might be doing this?
I am trying to convert text in a cell from: 03/08/2014 2330 to a date that looks like this: 03/08/2014 23:30. Then I also need to extract just the time only and put that in a new cell.
I can do it in a few steps by using Data -> Text To Columns, formatting the date and time separately, and then putting them back together again.
Is there a 1-step way to do the original text to date/time conversion?
I have been sent an excel sheet, that contains a text column with a date and time format below
24/04/2009 1700
15/05/2009 2359
16/04/2009 1400
Is it possible to convert this into date & time to use in a calculation.
I have a column of times, that are actually dates of 1/0/1900 plus time, from which I want to extract the AM or PM status. I can format it to show this, but it's really just a fraction of a day. I need the actual text "AM" or "PM", not a decimal value.
Is there a formula to do this?
I am try to get a space between the date and time but just can't get it. This code is entering the date and time in a textbox on a user form. I really don't need the Seconds at all.
This is what im getting in the text box. 11/23/20137:41:30 PM
This is what I would like. 11/23/2013 7:41:30 PM
This is the code I am using.
Private Sub UserForm_Initialize()
edate1.Value = Format(Date & Time, "mm/dd/yyyy")
End Sub
i currently have a table/template in which external data is pasted... however there are 2 colums titles DATE and START TIME (amongst others) now although where the data is pasted from the information is in the correct format. After the information is pasted both the columns have exactly the same information in them. I'm pretty sertain the only reson for this is that the source the records/data actually comes from formats them on the screen differently to how the records are stored on the database using code....
so after the expanation which hopefully made sense is there any way i could convert a record like this
Thu Jun 28 21:54:33 GMT 2007 (this is how the information is pasted into the 2 columns)
to both
28/06/2007 for the DATE column
and
21:54:33 for the START TIME column
the cell format makes no difference because the information is both text and numbers....
Consider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
I'm trying to look up information in "pi" by entering a time that you want to look up say 1800 or 935 and have a cell that would enter it as todays date with that time so I can use it as a timestamp in "pi"
View 1 Replies View RelatedI have one column with as many as 50,000 or more rows. The data format for each row/ cell is unique as shown below ( date and time). I wanted to split the data as shown in "Formatted Data" below. Have Tried Text To Column formatting but didn't work right.
Raw Data: Formatted Data (2 cells):
2005/11/02 23:55:15.758 ==> 2005/11/02 23:55:15.758
2005/11/02 23:58:16.698 ==> 2005/11/02 23:58:16.698
2005/11/03 00:07:13.830
2005/11/03 00:10:14.971