I have a sheet called "Richard" and i wish to assign a button so that when i click it, it goes straight to it.
I know how to make a button and assign the macro but i just need the code. So would be very grateful if somebody could help me with this or point me in the right direction.
I am Using an If statement to check if something has been verified in the last 30 days.
Code:
(TODAY()<=DATE(2011, 9,27)+30,"Yes","No")
Now I would like to create a button that modifies the Date(y,m,d) field to current date. How I could set the y, m, and d to the current values using a button in excel?
I created a custom toolbar button which works perfectly.
Because I needed to save each workbook as a specific workbook this is taken care of by the vb code.
I would like when the button is pressed for the original workbook template to be opened.
At this moment if I have a blank workbook or no workbook open and I press the button the programme opens a version of the workbook but not the template version how do I point Excel at the templates.
I have requirement wherein, I have to put filter conditions on two separate columns in the same sheet & putting hard coded value eg. "XYZ" in third column for this selected range. I am using macro autofilter but its giving me errors for multiple filters.
View 9 Replies View RelatedI am looking for a formula which will calculate a sell price with 20% profit after taxes and costs. I need it to factor in a fixed shipping cost (eg £10), a 7.5% Amazon fee of the sell price, then 20% tax of the sell price. I currently have a formula which essentially does this but as I'm not good with Excel it requires me to input all the values every time which is not practical considering our large inventory.
View 3 Replies View RelatedThe following code works fine
Application.Dialogs(xlDialogFindFile).Show
I would like to know if I can set it so when the dialogbox appears it starts at a folder located on my C drive
The default setting opens the dialog in MyDocuments
How do I set a variable to the active sheet name in VB.
Hypothetical example here:
Dim Sht as Name
Sht = Activesheet.Name
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies View RelatedI have a form that will be populated with different numbers of records. I need the records to be locked, but the remaining rows (if the user needs to add new records) to be unlocked. Can I use some sort of range.end function for this?
View 9 Replies View RelatedIv changed the security settings to my name (along with admin) and removed 'everyone'.now when i go into my folder, everyone else's excel sheet is there but mine has gone.
is there a way i can get it back?
I am working on a file composed of 3 userforms.
Userform1 = Made of 2 Option buttons namely Data 2 and Data 3 and the usual command buttons.
Userform2 = I would like this to be the one that appears if I choose Data 2 and click Ok.
Userform3 = I would like this to be the one that appears if I choose Data 3 and click Ok.
Clicking on the below link will take you to a results screen, however I need to click on the button or image with the word Races on it. I've tried to use getelements, but I can't get the equivalent of clicking on the button.
[URL]
I have a spreadsheet that I'm using as a call log for a support desk. Sometimes, when the problem is outside of my scope, I have to call in a ticket to a helpdesk.
I want to keep the call log separate from the ticket list, but I want to be able to reference a ticket number for a specific call or vice versa using a command button.
I am wanting to create a push button function with a query attched that will allow the user to input certain criteria with the end result in sorting the column containing the criteria.
I have attached a sample of my form:
My desire is the user will have the ablity to push the button and a input box will appear and they will be able to enter the data to search for. And the column with sort showing only the information required.
What I am having difficulties with is creating the pop-up input box. A simple macro with a sort or filter will not work as the data criteria is not the same everytime.
I have a command button that upon its click I would like to delete a specific row. I am using a vlookup which is giving me the row of the number I would like to delete. How do i go about deleting out this row?
this is also a radiobutton within the row that I would like to delete out as well. It is not named but it linked to column B within the row that I will be deleting.
I have a sheet with various pivot tables and charts, I want to have a row of buttons at the top to jump to the corresponding cell range.
View 1 Replies View RelatedBasically it works out peoples hours
standard hours
overtime 1
overtime 2
because there is quite a lot of coding going on i was just wondering is there a simple bit just to add into each code that will keep the cell 0 until something is added into a different cell.
e.g
A1 = 00:00
A2 = 00:00
because of the formula A3 = 16.5
i need A3 to say 0 whilst A1 and A2 are at 00:00.
the Formula for A1+A2+A3 is perfect when something is entered into A1 and A2
I am running excel 2010 with windows 7. I created a macro in sheet 1 and I wish to activate the macro from sheet 2 using a form button. I have entered the code below. I know how to perform this function on a more simple macro like adding names to cells. This code is a bit more complex I just dont know where to start.
Code:
Sub LoanData()
'
' LoanData Macro
[Code].....
I'm trying to create a command button on my sheet that when clicked will find all rows in column u that read Engineering Evaluation and then copy certain cells from that row to another sheet. The kicker is that this button will be used over and over again as more entries are entered into the log. I only want each row counted once.
Right now I get a run time error for the "For Each Cell In Application.Intersect(Range("u:u"), target)" line.
I have the following question: I attached my file. In sheet "boekhouding" I want every cell in column H to contain a button that locks that specific row. So I can't accidently change the dropdownmenu for that row.
I also have some sort of strange problem in worksheet "Rekeningen", Range D1-D5 is named "Grootboek" were it should be named uitgaven. I can't change the name, but it doesn't seem to matter in worksheet rekeningen (the drop down menu for uitgaven works normally), what is wrong here?
Sub OptionButton222_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = False
End With
End Sub
Sub OptionButton223_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = False
.Shapes("Notch 2").Visible = True
End With
End Sub
Sub OptionButton224_Click()
With Worksheets("Beam Input")
.Shapes("Notch 1").Visible = True
.Shapes("Notch 2").Visible = False
End With
End Sub
i need to modify it so that a selection on the beam input page causes the images to change on the beam output page. Currently this code is in the module section of VBA.
I have a combobox that is referenced to a named list 'ListReels'. There are only 8 choices (Reels 1 -8), and each has an accompanying worksheet in the workbook. The user selects a reel, then inputs other information. When an 'Enter' command button is clicked, I had like the data to be entered onto the next available row of the worksheet with the same reel name (eg, if reel 2 is selected from the combobox, then the data should be added to the Reel 2 worksheet on the next blank row.
View 4 Replies View RelatedMy boss wants a spreadsheet that has multiple buttons on it that will change the background color of a specific cell to four different colors. Example:
Text written in Cell B3, Button in Cell A3 that will change the Background color of Cell B3 to either Green, Yellow, Red or Blue.
There will be a lot of buttons on this worksheet following the same format as above. I don't want to change the value of what is in the cell, just the background color.
I have created a individual tracker spread sheet in each user system and on the spread sheet I have inserted 2 buttons in 1st sheet. when employee wants to take a break he has to click on the log out button and when he came back he needs to click on login button. I have another sheet named "timings" and I have created 2 columns, one is login and another is logout. What I need is when user click on the login button, the system time and date to be auto update under login column and when he clicks on logout button the system time and date to be auto update under logout column.
View 14 Replies View RelatedI'm trying to create a formula that takes from "Manual" Sheet the number from colume G2 and multiply it by the percentage in sheet "AllocationRule".
My formula currently is =Manual!$G$2*AllocationRule!$B5.
What needs to happen is that the total number in "Manual" needs to be distributed evenly in 4 rows by the percentages allocated in "AllocationRule".
Right now I can't copy my formula over to the sheet because the "AllocationRule" should stop at B5 and not go further and the G2 from "Manual" should not change for the percentage allocation but should change to the next row for the next month.
And then after I've done the calculation I want the LOB in "AllocationRule" to be displayed in the LOB in "H1913_H1914" but I'm not sure what formula to use.
I remember years ago that I made a couple formulas that on sheet one would transfer to another sheet when I enter in sheet one.
View 5 Replies View RelatedI would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI would appreciate if someone can help me figure out a macro that will copy range (A3:T112) from "Step 1" sheet to next available row in "Step 2" sheet.
View 8 Replies View RelatedHow do I change this macro to refer to the current sheet name instead of "FullScreen (2)"?
View 4 Replies View RelatedThe senior members have made it less intimidating to start writing code. Infact I picked up a DUMMIES book and a Macro book and it's been a lot of fun. Anyway here is my code that I have created thus far.
HTML Code:
Sub ReportExtract()
Sheets("Sheet1").Range("B2").Copy Destination:=Sheets("Sheet2").Range("C4")
Sheets("Sheet1").Range("A2").Copy Destination:=Sheets("Sheet2").Range("C6") '
[Code]....
Essentially what I am trying to do is copy these cells from sheet 1 to sheet 2 and then save it as another file using the name of C6&"Text String *Report" This would essentially take the first record A2 - CL2 and then delete that record and move onto the next row 3 and loop through and create another file with the same name C6(Sheet2)&"Report Name" Sheet 2 is the template where the data from the rows will drop into. I have those called out above in the code. It works just fine. I'm stuck though with how to copy the file and move threw all the records and saving them as separate files. Just to make sure I am clear it's 1. Copy data from sheet1 to sheet2 (Template). 2. Then save that file with the file name as cell C6&"some text" concatenated. Loop through sheet1 grab the next record and rinse lather repeat. Just a few weeks ago I was struggled to create macros and now I can copy. Pretty weak I know but I really enjoy this, in fact I sold all my books and just have VBA material so I stay focused.