Shade Cell If "NO" Value Is Entered In 2003
Sep 21, 2009Can you have a cell shade (using a formula) if another cell has a validation list response with "NO" in Excel 2003?
View 2 Replies
ADVERTISEMENT
Excel 2003 :: Cell Value To Change If Date Is Entered In Different Cell?
Feb 21, 2014I am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
Excel 2003 :: Write Formula That Will Leave Cell Blank If Nothing Is Entered?
Sep 28, 2011how to write a formula that will leave a cell blank if nothing is entered. I do not want it to show a 0 unless the cell entered is a 0.
In cell G16 - I am adding U46 and U58 together.
I do not have a problem when it is 1 cell - my formula works fine. When I have 2 cells added together, the formula does not work.
Shade Cell If Criteria Is Met
Jan 13, 2009I have a work sheet that has a date in a cell B7 and the system Date is Cell AB4.
What I wish for the sheet to do is shade the cell depending on the following criteria: If the date in Cell B7 is 2years and 10 months Before the System date to shade it Green, If the Date is Between 2 years 10 month and 3 Years before the System date shade yellow and if it is 3years and over shade Red.
For example if the date in B7 is 11-12-08 and the system date is 13-01-09 then the cell will be shaded Green.
Formula To Change Cell Colour :: Shade A Cell Depending On Condition
Feb 9, 2007Is it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedAutomatically Shade Cell On Schedule?
Jun 27, 2013I have put together a duration schedule for work and have it set up now so the days with automatically fill if they are on or between the start/end date. Below is the formula that I have constructed. As of right now each activity is colored the same. I would like to have each activity match the color of the person performing it. My crew names are all in column A with a conditional format to be color coded with the name entered.
View 11 Replies View RelatedShade / Color Cell With Filter That Is In Use?
Jan 14, 2014way to shade/color a cell with a filter that is in use. . . that way, a user doesn't have to look at microscopic drop down filters to figure out which column is being filtered. .
View 1 Replies View RelatedAutomatically Shade Cell Dependant Upon Text In Aother Cell
Jul 13, 2009Im writing a spreadsheet that will act as a hotel room booking diary. There will be 52 sheets (representing each week of the year) and each sheet will therefore represent one week
Each sheet will look at operate the same. Running horizontally will be the days of the week and running vertically will be each of the bedrooms. There are 22 bedrooms in total and each room will have 12 cells allotted to it for each day - lets call this a 'block' and presume that the first block runs from C10 to c21. The final of these cells C21 will have a validation and the user can select 'PAID' 'TO PAY' or 'INVOICED'
If the user selects 'PAID' in C21 I want cells C10 through to C21 to shade GREEN
If the user selects 'TO PAY' in C21 I want cells C10 through to C21 to shade RED
If the user selects 'INVOICE' in C21 I want cells C10 through to C21 to shade YELLOW
Shade Cell Certain Color Based On 1 Date Every Year?
Aug 6, 2013I have a column with dates of July 1 of every year. How can I use conditional formatting to shade a cell a certain color based on July 1 of every year? The cell for July 2013 should be shaded, when 2014 comes, it is no longer shaded, then 2014 becomes shaded, & so on...
View 1 Replies View RelatedConditional Formatting - How To Make Cell Shade A Certain Color
Apr 5, 2012How do I make my cell shade a certain color? For example, green if >90%, yellow if >70% and red if
View 6 Replies View RelatedConditional Formatting - Shade Group Of Cells In Row Based On Value In 1 Cell?
Jul 28, 2013I have a spreadsheet where I want to be able to Fill cells green in Column B to Column N for any Rows that have a value in Column L. All other Rows should remain the current colour (orange).
I can Fill the cells in Column L using conditional formatting but am not sure if I can use Conditional Formatting on other Columns so that their Fill colour is determined by the value in Column L?
VBA To SHADE Cells Based On: Step-size & Starting Cell
Mar 4, 2009I have a spreadsheet that will monitor payment schedules, in which both payment frequency and the payment start date are inputted by the user.
As such, to make filling out the column(s) fool-proof, I want to grey out cells in which data should not be entered.
For example, if the payment frequency is every 6th day, and the payments are to begin on day 0, then days 0, 6, 12 (etc) should be left white, whereas the remainder of the cells should be shaded.
I can achieve this using multiple conditional formatting rules in excel2007 with iterations of formulae of the type:
Excel 2010 :: Shade Range Of Cells Based On Particular Cell Value?
Feb 17, 2013I'd like to shade a range of cells based on a particular cells value.
Specifically:
If cell E3 is JUNE then I'd like the range of cells from B10 thru I10 to be shaded.
If E3 is JULY then it would shade C10 thru I10....etc.
Excel 2010
Excel 2003 :: Date Formula For If Given Date Is Before Or After Today Or If Nothing Entered
Jan 17, 2013Cell B1 contains a date, then B2 contains a formula that says:
=IF(A1>TODAY(),A1,A2)
A1 contains a green tick and A2 contains a red cross.
What I am trying to add is that if B1 contains no date then B2 needs to be blank.
I tried using =IF((A1="",0),(A1>TODAY(),A1,A2) to get it to show a 0 if there was no data but this doesn't work.
I am using Excel 2003.
Vba Shade A Cell Once Its Moved ( And Add New Rows Beneath ) Minor Code Adjustment
Nov 7, 2009I've adjusted a jonmo code to add an item in col B which is not in col A to the bottom of col A. - fab code, thanks jonmo.
But.. i want to:
insert rows beneath those in column A to accommodate the added items and shade those cells in list A once they been added ( so the users now they've been moved )
I've posted the code below ( including my attempts at colour change where it shade the right cell but in the wrong column ) ...
Shade A Cell Red If Two Separate Conditions Apply (in Separate Cells)
Dec 3, 2013I'm trying to use a formula in conditional formatting to highlight a cell red if the cell contains a 0 but the date shown in another cell has passed. I want to copy the formatting throughout a column but I don't want the cell to highlight if there is no date in the other cell concerned.
View 11 Replies View RelatedAttached Worksheet Automatically Shade Out All The Saturdays & Sundays In Any Given Month Everytime You Change The Month/Year Cell
Jul 19, 2006Is there a way to make the attached worksheet automatically shade out all the Saturdays & Sundays in any given month everytime you change the Month/Year cell at the top of the worksheet, as example? I've tried using the weekday/Weekend formula, but can't quite get it right.
View 2 Replies View RelatedShade Cells With Data
Sep 1, 2009Any time that any data is entered into one of the cells within my spreadsheet I would like the cell in which data is entered (and only the cell in which data is entered) to automatically become shaded (gray, preferably). I know conditional formatting should be used, but beyond that, I have no clue what to do. I would also prefer not to have to enter in conditional formatting formulas into all 105 cells, but I will do it if necessary.
Just in case, here's a little more information on what I am doing: I will be sending this spreadsheet out to about 10 others, and when they enter their name on a particular day at a particular time, I want that cell to become shaded. Other people might also enter their names at that day and time as well, so I would want the cell to stay shaded if that happens. Macros are not an option, because of security reasons.
Macro That Will Shade Entire Row Red
Jun 4, 2014I have a spreadsheet with columns a-v. Column F (titled aging) displays how many days old an issue is. I would like to have a macro that will automatically shade a row light red if the number is less than 90. I don't want the entire row shaded, just the contents of column a-v.
View 2 Replies View RelatedEvent To Shade Specified Cells
May 22, 2009I am trying to create an event that would shade certain cells if a cell is active.
For example if the active cell is cell J39, shade the following rows as follows:
Shade All Cells With A Formula
Dec 6, 2009I need to add a Macro/VBA script to a spreadsheet i'm working on which will shade all cells, within a workbook, if the cell contains a formula (eg: =sum(A1:A5))
I can't get it to work under conditional formatting, nor with my limited knowledge of VBA.
Want To Shade Cells Using VBA Code
May 18, 2006I'm trying to come up with vba code that will gray out a set of cells when a certain value is enter in another cell.
View 9 Replies View RelatedFormatting To Shade Only Zeros
Dec 15, 2006I am trying to find a formula for my grade book. What I want to be able to do is shade every cell that has a value of zero (but not empty cells) so that when I print out the grade book, I can easily see all missing assignments.
View 4 Replies View RelatedWhen A Date Entered On A Specific Cell, Automatically Enter A Text In Other Cell
Jul 10, 2006I have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
How To Shade Area That Highlight Between Two Dates
Apr 28, 2014I have a graph and wanted to be able to shade in color gray the data that fall within highlighted.
Test.xlsx
Shade Line While Entering Data
Jan 12, 2013As I input data down a column in a wide Excel spreadsheet I would like to have highlighted the line I am working on as a check that I am in the correct place. I know that I can hit 'shift', 'space' for a single line, but is there a way to do it without having to hit those keystrokes each time?
View 2 Replies View RelatedShade In Area Under Line Graph?
Dec 1, 2011What's the best way to shade in the area under a line graph?
View 1 Replies View RelatedVBA Code To Shade Rows With Like Values
Jun 17, 2014I am fairly new to VBA and I am having some trouble with a VBA routine that was used in some workbooks I was given and I am trying to reuse that code.
What I am attempting to do is to shade the rows (alternate colors) whose value in Column C is the same until that value changes.
Example:
Row 1, 2 & 3 all have the same value in Column C so these would shade color 15
Row 4 thru 10 have a different value in Column C so those would have no shade
Row 11 thu 13 have a different value in Column C so these would then be Shade 15
So here is what I have done:
I set the range for the routine to step thru, then I defined the row & column to start processing. I then compare the current row to the row above. If the values are different then I compared the colors of the rows, and set the active row to the opposite color.
This routine runs but the first cell in each grouping isn't being shaded but then the rest of the rows are shaded correctly.
I have searched the web and look thru my code several times but to no avail, I cannot seem to understand why this will not work.
Code:
Sub grid_coloring()
Dim rwIndex, colindex, colindex2, ncount, bcount As Integer 'set rwindex, colIndex as an output number for columns. bcount and ncount are for counting blanks and dupes
Dim theRng As Range
Dim FirstRow, FirstCol, LastRow, LastCol As Integer
[Code] ..........
Cell In Excel To Determine If Country On List Has Been Entered In Cell?
Apr 18, 2013I have a Userform that allows the user to input a country from a combobox which after clicking a button writes that data into Cell AH11 in the excel spreadsheet, what I need is for Cell AI11 to read what has been entered into Cell AH11, look up whether or not that country is on a list I have and enter a yes or a no if it is or it isn't on that list.
View 2 Replies View RelatedRunning Total In Cell Based Upon New Number Being Entered Into Different Cell
Apr 10, 2014I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx