I have a Userform that allows the user to input a country from a combobox which after clicking a button writes that data into Cell AH11 in the excel spreadsheet, what I need is for Cell AI11 to read what has been entered into Cell AH11, look up whether or not that country is on a list I have and enter a yes or a no if it is or it isn't on that list.
View 2 RepliesI have a Userform that allows the user to input a country from a combobox which after clicking a button writes that data into Cell AH11 in the excel spreadsheet, what I need is for Cell AI11 to read what has been entered into Cell AH11, look up whether or not that country is on a list I have and enter a yes or a no if it is or it isn't on that list.
View 3 Replies View RelatedI've got a worksheet with five columns of data. One of the columns contains country codes. I have a list of countries that the codes relate to. I would like a new column in the worksheet that contains the country name. I'm not sure if this is possible, but it seem that most things are with VBA! The countries and their codes are on 'Sheet2' I relalise I might have to do some boring re-ordering of the data on 'Sheet2'
View 2 Replies View RelatedI am using Excel 2003 at work.
New cases are entered on to the spreadsheet. The case remains open until a closure date is entered, at which point the case is closed. What I need is the following:
Cell A3 = should say "Open" if there is no value in cell Y3
Cell A3 = should say "Closed" if a date or any value is entered in cell Y3. Ideally it should only say "Closed" if a date is entered in format xx/xx/xx, but am flexible so that it says "Closed" if any data is input.
At the moment Cell A1 has a drop down list consisting of open and closed. I will remove this if it causes complication.
Is there a way using a macro to determine which cells have a dropdown list and then retrieve the name?
View 4 Replies View RelatedIs there a way to have a formula or a VBA code associated to the choice of any value in a Validation list.
For example is there a way to have lets say in A1 a validation list and to have B2 returning the username of the person of who will select a value in A1?
I have a Validation drop down box (column B) and a defined range drop down box (column E linked to the Totals tab with A2-A31 defined as Products) that I need to activate everytime data is added to a new line in column 'A' and cells in column 'B' or 'E' are selected. Additionally, they need to activate if the cells in column 'B' or 'E' are selected for any of the old data so changes can be made. This will help reduce the overall file size and calculation time for a year's worth of data.
There is already some code on the worksheet that looks like it can be adapted if someone knows how to code in the drop down boxes.
I am trying to lock out cells if a value is entered in another cell in Excel 2010. For instance, when entering a value into N7 (merged Columns N7,O7,P7 into one - not sure if that matters) I want Q7 (same thing, merged Q7,R7,S7 into one) and T7 (merged T7,U7,V7 into one) to be locked out.
So, if N7 has anything typed into it, I would like Q7 and T7 (merged) to be locked.
If that's possible, I would also like for it to happen from rows N7 - N21 ...
Is this hard to do? My understanding is that it's only possible through VBA ... am I accessing the script correctly? (right click the 'sheet 1' tab [named Issues log], select 'view code').
I have Two Sheets in same workbokk.
Sheet1 Sheet2
Sheet1 B2 = "any numeric value (whole digit i.e 10 or 55 like) - user input "
Sheet2 Starting point is cell B3.
What need to happen - As soon as user enter number in Sheet1 B2 = any value say, 20 then,
Sheet2.Select
Range("B3").select
suppose i assign value p as,
dim p
sheets("sheet1").select
p = range("B3).value
now here i want to indetify this number, i.e.- 20 (User input) and then as soon as user enter this value,
step 1 - sheet2 get select.
step 2 - from B3 sheet2, by row wise it select next 20 row as well next 20 columns.
for eg.- from B3, the data should select like following,
B3 to U22.
and this selected area highlight with single border only. That's it.Therefore, my main problem is how excel will understand this numeric number ?
Is there a formula which places the date In A5 whenever text is entered in A2 - Excel 2013
View 9 Replies View Relatedpivot table?
Is there a Color Function type vba code that can give me the color integer? I have one that can do that for cells that I've manually colored but I can't find a code that works on conditionally formatted cells.
excel.jpg
how to make my network days stop counting when I insert a value in the completed column (in this case H3). I have a Date Received column (A3), a due day column (G3) and the last column with the date (N3). My remaining days column keeps counting after I filled the completed cell (H3) and won't stop counting after. I need a formula to stop after the completed cell is fill up.
how to write a formula that will leave a cell blank if nothing is entered. I do not want it to show a 0 unless the cell entered is a 0.
In cell G16 - I am adding U46 and U58 together.
I do not have a problem when it is 1 cell - my formula works fine. When I have 2 cells added together, the formula does not work.
How do i change this code so that before going on to the next box, the entry must be: Monday, Tuesday...Sunday.
spellday = vbNullString
Do While Len(spellday) < 2
spellday = InputBox("Day of week")
If spellday = vbNullString Then
spellday = MsgBox("Press OK to Cancel Entry" & Chr(13) & "Press Cancel to return to program", vbOKCancel)
If spellday = vbOK Then
MsgBox "Program Closing" & Chr(13) & "Reopen file to run program."
ActiveWorkbook.Close
End If
End If
Loop
Before my workbook is open the following code is run, which asks the user to enter the password. Depending on the password Range("name").Value takes values from the worksheet "Data" from table "M4:M20". The list of passwords is in the table "L4:L20". My code seems to be not optimal (too long). Does anybody know how to optimize this code?
Sub GoodMorning()
On Error Goto Error
'Prompt the user for a password and unhide the worksheet if correct
Select Case InputBox("Please enter the password", _
"Enter Password")
Case Is = ""
Call HideSheets
MsgBox "Sorry, that password is incorrect! Please contact the administrator.", _ ............
I have a product list where each row of the worksheet has an image, product details and suggested lists/retails for each local currency.
Some products are not available in certain countries and each market doesn't care to see the other market info. (There are hundreds of items and dozens of countries.)
How can I create a drop down selector so that a user can choose their market, i.e. "Australia," and only the rows and columns relevant to them appear?
Can this be done without macros,? This sheet is distributed among 100+ people and needs to work for lowest common denominator.
how to add county flags to excel table.I have a table with list of countries and I would like to add picture of their flags into the same cell or to the neigboring cell.
View 1 Replies View RelatedI have 6 Headings in excel named...
"A" in cell A1, B in B1, "C" in C1, "D" in D1, "E" in E1 and "F" in F1.
There are two projects.
Project 1 has phase A, D & F and Project 2 has phase A, B, C, D & E.
My Specification follows...
1). Take Prject 1 - Which starts from A...in cell A2 I will keyin "A". When the phase comes to an end I will key in the end date of the phase. As soon as I key in the end date in cell A2 Letter D should automatically appear in the cell D2 and when Phase D comes to an end I will key in the end date in Cell D2 which should automatically keyin F in the cell F2. and is the same case for Project 2.
I've written a procedure that loads a list of country selections in a dropdown (see attached/vb editor/ThisWorkbook).
The problem is the valid values for this column need to be just the two digit country codes, not the country code +dash+country name. The reason the dropdown selections include both the two digit country code and the country name is because most users will not know the two digit codes. Presenting the selections in this fashion will make t much easier for the user to make the proper selection.
So here is what I need: When the user makes a selection from the dropdown list, the resulting value needs to be the two digit country code only. Is there a way to incorporate this formula .... =MID(B2|1|2) ... in the vba procedure which runs after the user makes a selection? Or, is there another way to accomplish this?
Example_COO.xlsm‎
I am creating a spreadsheet for inventory use. I want to have a running total in (1) cell based upon a new/different number being entered into a different cell.
Column B, Row 1 (This will be a new/different number entered every day - inventory in or out, so positive or negative number)
Column D, Row 1 (This will be a running total based on numbers inserted in previous 2 columns)
Basically what I have is a key inventory. So there is column A with key number, B should be keys IN, C should be keys OUT, or ideally B would be IN and OUT meaning, for inventory IN input a positive number and for inventory OUT input a negative number, and D Should be total.
Column E represents number of keys currently in the inventory. I was going to hide the current inventory column so all you see is IN/OUT and total.
So what I need is to be able to just come in and type in a number in the IN and/or OUT column, without having to add/subtract it with the number already in that column.
Bottom line, I'd like to be able to use IN and/or OUT columns to just type in numbers as they come and not have to worry about what's already in those columns and get correct total number.
Ok here it is. Attached worksheet shows
Column A - Key Numbers...No data value
Column B - Inventory IN
Column C - Inventory OUT
Column D - Total
Column E - Current Inventory(Starting point)
So the formula I used to get what i currently have is (=B2-C2+E2). This way whatever i input in columns C and C. totals out in D. But this way every time I want to add/subtract a number in B and C, i have to add to the number already in the column. I'd like to be able to type in a number in B and C as i go and still have a correct total. I wouldn't mind having just one column for in/out and use positive and negative numbers to differentiate inventory in or out.
Key Inventory - Test.xlsx
I need to achieve the situation below with a formula. I have tried simply doing, for example, = B3+1 but this throws an error, probably because the value being checked is alphanumeric.
Data
A001
Data
A002
Add next number (A003) when data entered in cell to left
Currently have a column of cells that after the data has been entered we would like the cell to lock to prevent changes. The sheet is currently protected with the cells in question unlocked (D173:D250). We would like to be able to change the data if we unprotect the sheet. We would also like to be able to add/delete cells (list) in the code as needed.
View 9 Replies View RelatedSo I am having trouble figuring out how to do multiple text to equal multiple numbers. For instance right now I use =IF(E9="JOHN DOE","07", but I would like to have it where IF E9 = John Doe the cell shows 07, but IF the E9 = Sam Doe I want the cell to show 08, and the same IF E9 = Pat Doe the cell shows 09 and so on.
Meaning is there a way to have multiple functions go to a cell dependent on what is entered into E9 for example. I just want to have a number come out in one cell if a certain name is entered in a different cell. I loooked at this post [URL]....which got me started,
I have a column which contains a list of countries and the next column is filled with Yes and No's.
Is there a formula which calculates how many Yes a country receives?
e.g. USA
Yes
Germany
No
France
No
[Code] ..........
I am trying to write an "IF" scenerio.
I want to be able to control what is put in a cell based what is placed in another cell.
For example.
I want to be able to only enter a credit/debit in B1 based by what I type in A1.
If any cell in column A is any of these numbers (41,47,48,49,50,51,52,60,61,65,68,63,67,69) then any number entered in a cell in column B can only be a positive number. If any cell in column A is any of these numbers (40,42,43,44,45,46,52,53,55,56,57,64,62,66) then any number entered in a cell in column B must be a negative number.
So if A1 is 41 then B1 must be positive (debit).
If A4 is 42 then B4 must be negative (credit).
I have a dropdownmanu in sheet1 with different countries taken from Column A in Sheet3. I need a macro to run when i select a country example Denmark. It will fill out transmittal code and also country code in named cells for it in sheet1. Info taken from Sheet3
Transmittal code is in below testsheet in Sheet1 cell E12.
Country code is in Sheet1 cell.
But this have to be possible to change. Also the range for the country have to be possible to change.
This vba code i need to run as soon as i select a country in the dropdown manu.
But one thing i would like to solve also is. When i select a country it will create a dropdownlist in I13 taken from the info in column, i have in Sheet3 column F. So if i select example Denmark, it will show a dropdown menu in sheet1 I13, with the ledger codes 10 and 6x. I have tried to make this work but cant make it work good.
I use excel 2003. Please have a look and upload the testsheet back.
I need a formula that will basically just display a 1 or 0 in one cell based on the date in the cell next to it.
If the date is older than 180 days then a 0 will be displayed in the cell.
If the date is less than 180 days then a 1 will be displayed in the cell.
I have an attachement as an example.
I have a protected sheet. When someone enters a value in column A, I want a value to be inserted into the corresponding row in column G.
E.g. When I enter date in cell A45, I want the time this date was entered into cell G45
I have a range of cells (A1:A12) each with monthly sales figures.
I need to highlight where in the range the values exceed a certain amount ($50k for example). However it's only the first cell that hits the value that should be coloured, i.e. once it reaches the figure nothing afterwards is to be coloured. So it could occur in cell A3 nothing afterward should be coloured.
I've tried using conditional formatting but I can't get the cell to determine if any other cell is coloured.
I'm trying to create a formula where: If A1 is between B1 and C1, then it equals D1, but also if A1 is between B2 and C2 then D2 etc.
View 7 Replies View Related