I have a table of information as follows:-
CLIENT BILLINGS INCOMEMARGIN
CLIENT 1 13,740,719 541,5743.9%
CLIENT 2 2,524,535 59,799 2.4%
CLIENT 3 349,125 17,085 4.9%
I need to be able to show amounts less than £1million which is easy enough in an IF statement but then I need to be able to show amounts between £1million and £5million as a seperate block.
I need to add different amounts to a column of prices based on a column of zone numbers. I don't know if that makes sense but here is an example test.xlsx
View 3 Replies View RelatedI have a price list with type & price, I want do a drop down list for type (this is solve), so when i select list at type, the cell I want it show price.
View 2 Replies View RelatedList Price $46.98 (e2)
Net Cost $19.53 (e3)
How do I enter a calculation that will show me my discount percentage from my supplier? (e4)
I then need to be able to drag the formula to the end of the sheet. Discount percentages will be different for each product, but the List Price and Net Costs are present, so the calculation needs to take these differences into consideration so that I get the correct discount percentage for each item.
I own a Hair Salon which collates its daily takings using a spreadsheet. A section of this takings sheet asks staff to enter which Products have been sold and what they where sold for (RRP), so that once all products have been entered, totals at the end of the day allowing the end -of-day "till-up" process to reconcile purchases and services rendered aginst cash and cheques received.
Unfortunately there is over 600 products to choose from and this evergroes as new products are introduced by manufacturers. Names are long and often very similar, and product price manual listings are slow to reference, therefore the customer has to wait while the staff find the right product and select the right price.
All of this is subject to human error. What i would like is simply to enter part of the product name into a Cell and the right product to be visibly selectable and the price automatically added to an adjacent cell.
I am trying to work out the 'Upper Percentile' of some donations we have received.
To do this I thought it would be rather simple, I just used
Code:
=LARGE(A1:A100,ROW(INDIRECT("1:9")))
This worked but obviously puts the values in 9 different cells, my work would like it shown as 1,2,3,4,5,6,7,8,9 in one cell.
I need J22 to multiply based on years in B22 AND increase 5% for each of those years (compounding) after two years (excludes year 1 from 5% increase). In addition the cell needs to remain blank if D22 is blank. B22 = 1, then the stockprice needs to remain the same, and only increase by 5% after year 1.
Currently...
B22 = a number of years indicated by the formula: =IF(A22="","",DATEDIF(A22,I3,"y"))
J22 =IF(ISNA(VLOOKUP(D22,stockprices,2,FALSE)),"",VLOOKUP(D22,stockprices,2,FALSE))
Example:
If J22 stockprice lookup is $1000.00, and the number of years listed in B22 is 6, then the reported value in J22 needs to be $1494.40.
Windows 7 Ultimate / Excel 2010
I have calculated the implied volatility for different single options using the newton raphson method. But, I also need to calculate the implied volatility which minimizes the sum of squared differences between the observed market price and the model price for each day. I guess one needs to use vectors (jacobian matrix) to do this, but I do not know how to expand the code to be able to do this. Anyone have any idea how this can be done? I have attached the [code] I have used to calculate the implied volatility for one option.
View 2 Replies View RelatedI'm trying to figure out a way of showing a price range on lots of different products. My spreadsheet is set out as follows(sorted by price ascending):
column A Column B
Product1 $1.99
Product1 $2.43
Product1 $3.01
Product2 $21.01
Product2 $23.98
I want to be able to summarise the product 1 price range as $1.99-$3.01 and product 2 as £21.01-$23.98. Is it possible somehow to concatenate the price from the first and last occurence of each product in column A?
The analysis basically has 2 data components to it:
The 1st part, is a basic transaction list of shopping items bought through the year. Each transaction's shopping item also has the quantity of that item purchased at that time.
The 2nd part, is a pricing sheet for all the different types of shopping items. The pricing sheet has different prices for different quantities at which the item is purchased.
What I am trying to do is to find the relevant price for shopping item, which depends on not only what the item is, but also the quantity. In point form, it should follow the logic below:
1) Identify the item in the shopping list (worksheet 1) from the list of prices (worksheet 2)
2) Find quantity in the prices worksheet that is closest to the quantity in the shopping list (i.e. where the difference between the quantity on transaction list and the quantity on the pricing sheet is the least)
3) Pull the price for this "closest quantity"
I have uploaded a worksheet showing the structure of that data.
[url]
Is there some VB code I need to do this, or can it just be a few simple formulas?
I am trying to find the median for a huge amount of data, so I have cut it down to just an example size. I have uploaded a copy of the example file.
I have three price ranges that I have to find the median for:
Under $5MM
$5 MM - $25 MM
$26 MM - $56 MM
I need to find the median for each price range for Signed units and Sold units. I also have to find a median within a date range (e.g. within the last six months) that includes the previous criteria.
For the first formula, I have tried using the following formulas:
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">="&0,IF($F$14:$F$34,"<="&5000000,$F$14:$F$34))))
=MEDIAN(IF($I$14:$I$34,"Signed",IF($F$14:$F$34,">=0",IF($F$14:$F$34,"<=5000000",$F$14:$F$34))))
(I remembered to do "CTL + SHIFT and ENTER" to make it an array.)
For the second formula, with the date range, I am able to find the total for the last six months, but not with a price range included.
The formula that I am using that works for the median of units Signed within the last six months is:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$E$34)))
However, once I try to find the price range, it does not work:
=MEDIAN(IF($H$14:$H$34="Signed",IF($G$14:$G$34>"07/31/2013"+0,$E$14:$EIF$34,IF($E$14:$E$34,">=0",IF($E$14:$E$34,"<=5000000",$E$14:$E$34)))))
A
B
C
D
1
$10
$2.95 to $11.00
$4.50 to $19.00
$17.45 to $40.00
Is there a formula that will add column A to the left and right sides of columns B and C to give me an overall answer range in column D?
All data is located within one book. I have two sheets with material codes in each sheet which include pricing (existing and current)
Sheet1 (has existing material codes plus existing pricing) Has about 1200 lines
Sheet2 (has current material codes plus current pricing), has about 36000 lines
I need to cross check if the material code (taken from sheet1) are still available in sheet2, and if they are, copy the current price back to sheet1. The current price needs to be pasted back into sheet1 (next to the existing price). If the material code doesn't exist (for whatever reason, in sheet2), the program needs to move onto the next line and leave the current price for that material code blank. The program should finish once all the lines in sheet1 are completed. I have attached a sample of what I'm trying to do,
I have have a large array of prices (across rows) and am looking for the closest price to match a price that I have been provided with. It's a basic benchmarking exercise on a row by row basis....and the price can be positive or negative. Is there a clean way to reference the closest price?
I have come across a fair amount of solutions, but none worked optimally - particularly the =INDEX(Data,MATCH(MIN(ABS(Data-Target)),ABS(Data-Target),0)) approach....it just didn't work for some lines, and only worked for values less than source price in other instances.
I would also like to reference the source on the next column.
The sheet has a price list (I attached the sheet). its a width x height(drop) format. If width or height <= minimum width/height then use the minimum listed. if width or height > minimum <=maximum then lookup in table next heightest value. here is the complication. any oversized items are priced as roundup((size -biggest size) / (biggest - second biggest size),0) * ( price of biggest-price of second biggest). so if my widths are
4600 4700 4800
10 25 35
and I am pricing 5050 I would do :-
calculate howmuch its oversize
5050-4800 = 250
Calculate the difference in the last 2 sizes
4800-4700 = 100
Calculate the rounded up multiples
250/100=2.5 rounded up = 3...........
I am trying to do an if statement where I ask if the 2009 price is .50 or less away from the 2008 price, bring back "Check" See below:
2008 2009
$23.95 $24.15
Using excel 2007
I'd like to have a list printed of all the "qualifying people" found in a range, and then sort their corresponding price values from highest to lowest in Columns A and B. EXAMPLE:
RANGE: D3:D20 - Numerical
RANGE: E3:E20 - Text (names)
RANGE: F3:F20 - $$$
I'd like to search column D for any values of 2 or higher. When it finds a 2 or higher, I want it to find the corresponding name in the SAME ROW in column E, and of course the corresponding price in the SAME ROW in column F. Then I would like only those qualifying people "with value of 2 or higher" to be listed in order from highest price to lowest price in Column A, and B.
COLUMNS
D--------E-----------F---
0-----Mike Bob-----$52.65
1-----Dave Jon-----$42.50
2-----Jane Doe-----$37.65
0-----Gary Lon-----$25.50
0-----Joey Saw----$35.65
2-----Mike Jon-----$35.65
1-----Kate Low-----$38.68
2-----John Doe-----$40.00................
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies View RelatedI M doing SUMIF correct on the below but it seems not to be adding up correctly. Can anyone point me in the direction of where I'm going wrong?
What I am trying to do is sum up the amounts in D if A equals C, as you can see in C their are numbers that appear twice so I don't know if this is a problem. I thought the sum =SUMIF(D:D,L:L,M:M) would sort this but the value I get for 59846(A) is 3665 which is on number 66336(C) so obviously doesn't match as this should be 1211.25........
I have a unit price and a quantity. I want to be able to take the sum of the extended price without having to add a column for extended price. I don't want to just hide it, either.
Example attached.
This year we need to display 2 types of VAT in every invoice. So any listed product in the invoice could have either 5% VAT or 18% VAT depending on its category. At the end of the invoice i need to separately express (show) the total for 5% VAT and total for 18% VAT.
View 3 Replies View RelatedI can use help creating the following forumla.
In column "A" I have Dates of Variances. In column "E" I have the variances for those dates.
On another sheet I need variances between certain dates. For example, get all variances between the dates 03/28/09 - 04/28/09.
How to write a macro that will sum daily figures into monthly figures? On the attached spreadsheet I would like to take the daily figures on the amounts on the VRU DAILY worksheet and sum them in the appropriate month on the VRU # sheet.
View 14 Replies View RelatedFor example: I have a spreadsheet with a column that has numbers such as 48600. When I go to format it into currency, etc. I select the decimal to move 2 places. Although it keeps giving me $48,600.00. I dont want that. I want it to put $486.00.
When I try to increase or decrease a decimal, it wont do anything until I have a decimal already in the number. So then I took 48600.00 and tried to increase/decrease the decimal, but it gives me either 48600.00000 or 48600. What I need is to make my number 48600 $486.00
I am extracting amounts from one page to another with eg = 'Oct09'!P9,
if there nothing in that line it returns a $ -
If 'Oct09'P10, has say $10.00, then it returns $10.00.
How do I go about getting rid of the $ - and leaving it blank?
currently have this: = SUMIF(D8:E8: F8:G8:H8,1,D29:E29:F29:G29:H29)
Range is multiple rows
need to get to here:
"multiple" Criteria needs to be able to multiply amount in sum range when greater than 1 and then summed in column I, across each row, then totaled at bottom of column I.
I realize sumif won't suffice.
How can it be changed to show the results instead of in Column A, in say range E10?
Code:
Option Explicit
Sub InsertRows()
' hiker95, 09/28/2013
[Code].....
I believe the problem lies somewhere with the Resize bit of the code, which I do not know how to change to display the results in Cell E10 and down.
I am coding a right-click popup and need some help specifying the range to show in the popup. The code is listed below.
How I can I adjust this code to show the range O400:O440 only? Right now it shows the entire column from O400 down.
Private Sub Worksheet_BeforeRightClick(ByVal _
Target As Range, Cancel As Boolean)
Dim objBar As CommandBar
Dim objButton As CommandBarButton
Dim introw As Integer
introw = 400
Cancel = True
On Error Resume Next
Application.CommandBars("avail").Delete
On Error GoTo 0
Set objBar = Application.CommandBars.Add("avail", msoBarPopup)
Do Until IsEmpty(Cells(introw, 15))
Set objButton = objBar.Controls.Add
With objButton
.Caption = Cells(introw, 15).Value
End With
introw = introw + 1
Loop
objBar.ShowPopup
End Sub
how to find the least frequent Numeric value in a range - while the range is in ONE ROW or ONE COLUMN.
I am looking for a formula to find the least frequent Numeric value in a TWO DIMENSIONAL TABLE (A1:D50).
Is there a way to stick the option "Instant email notification" so it will not change unless I'll change it!
I have some sales records that contain GBP payments, along with AUR, USD and EUR.
The GBP payments are not a problem, but a formula which could automatically convert AUR, USD and EUR into GBP payments would save a lot of time and reduce any chance of errors.
I have attached an example of the current layout.
Ultimately, I would like to put the sale in it's GBP amount where the boxes are blank & then a formula that detects either
A) If Original currency (the F column) is not GBP, then multiply the amount in the C column by whatever the exchange rate is in the G column.
B) If the exchange rate column G, has anything other than N/A, then multiply this by the amount in column C.
So, if the original currency in column F is in GBP, then I can enter data into the C column, and it will not change, however if the original currency in column F is not GBP, I would like the data in column C to change.
