I can use help creating the following forumla.
In column "A" I have Dates of Variances. In column "E" I have the variances for those dates.
On another sheet I need variances between certain dates. For example, get all variances between the dates 03/28/09 - 04/28/09.
I need to gather total dollar amounts from a column based on their date/month entered.
I have a sample attached, in cell L2 for example I would need to gather all the dollar amounts in Column G that were entered for that month in column B that correspond to the month in column K.
Need formula which can sum Amounts from varying Weekly time periods and the result be recorded in the appropriate month? I've attached a simple example of the way the output needs to look and a sample data table below.
View 3 Replies View RelatedI have a series of employee variances and dates for the variances in two columns.
I have another section on the same sheet where I want to track the amount of variances & occurances for certain months.
attached is an example of what I am looking to do.
I have a 11 worksheets in my workbook and 1 of them I'm using as a Index. All the others are for a individual person. Basically, I want to gather all the information from the 10 worksheets (but I want to keep the info on those worksheets) and transfer it all to my Index worksheet.
The thing is, I want to transfer a certain range to my index worksheet, and when I do so, it could automatically number the rows.
Let's say I add information on 3 rows to all of the worksheets and then gather them and insert them in my index worksheet. The next time I add information, I want to select all the information again and write it over the one I inserted before.
Example, I want to transfer range B5:K? (? being the last cell with info in it.) from all my worksheets to the range B5:K? on my index worksheet; writing over the old info on that sheet.
I'm trying to be as clear as I can.
This particular formula is used several times to gather various data points across 3 different sheets named Month-1, Month-2 and Month-3.I gather the data the following 3 formulas then sum it as needed with a helper cell.
=IFERROR(INDEX('Month-1'!$A$1:$G$6000,MATCH(TRUE,INDEX(1/('Month-1'!$A$1:$A$6000=$G$24)*ROW('Month-1'!$A$1:$A$6000)-MATCH($A96,'Month-1'!$B$1:$B$6000,0)>0,),0),MATCH($M$2,'Month-1'!$A$14:$G$14,0)),"")
[code]....
I am using the following forumla, it gathers the net sum of a column of $ amounts.
I need to have it changed to gather the Absolute ABS total instead.
=SUMIFS($B$23:$B$500,$A$23:$A$500,">="&$V23,$A$23:$A$500,"<"&EDATE($V23,1))
V23 has a date "Month" value.
I have an excel with several sheets with task for different departments. All of them are assigned to a person responsible for that task. I applied auto filter which gives me the overview for a person Per department, now i would like to gather all departments into one so we have an overview for each person what his tasks are.
View 1 Replies View RelatedI have a problem with my spreadsheet. I am trying to created a sheet to record time trials for bicycle racing. I have created in the main tab 'time entry' a class, rider #, name, incremental start time, and finish time. There will be 6 classes of racers (i.e. xm,xw,sm,sw,nm,nw). What I am trying to accomplish on the results tab, are the results based on the riders class. All of the riders classed as 'xm' listed with their respective info and time. I have attached a copy of what I have so far.
View 2 Replies View RelatedThey sent me a workbook with a lot of information including Employee Name, Position, Supervisor name and Organizational Unit (in columns A, B, C and D respectively). With this data, I need to create a "Tombstone" for each supervisor with his/her name, organizational unit, and the name and count of each position he/she manages. For example:
John Smith
IT
Analyst - 10
Programmers - 15
Now, I was able to easily get the names of all the supervisors and their respective organizational units in the tombstones. However, I'm stuck trying to find a quick way to enter all the positions each supervisor manages and their count. And with more than 300 supervisors in my company, doing this manually would take too long.
I have a Master list of kids names and age groups, that will be used by Coaches to update, from this i would like to have each of the different age groups details extracted into different worksheets within the same workbook.
I used an IF statement to but found it was leaving blank lines between finds.
I've started building a macro that loops the sheets and collects the information onto the first worksheet. I've been using Activesheet and activecell references but i'm afraid looping will change these references.
[Code] .....
I'm using excel 2007 sp3. I have a function that I want to adjust so that, when used, it spits back the last two numbers in a specific cell. Is there an easy way to do that? If my cell said blahblah12395-01, how can I get excel to gather the '01'? My current code is below...
Code:
RowPos = RowSpec & ", and " & Range("C" & LoopStrt)
The 'Range("C" & LoopStrt)' is what I currently have to gather the contents of the cell. I have a message box later that displays the "RowPos" string.
Is it possible to VLookUp Data between multiple workbooks (12 different workbooks to be exact) in one master sheet?
I would like the master sheet to find the empty data for the item number. Basically, how can I automatically populate the empty data for each item number in the master sheet. Every item will be different. The 12 workbooks are invoices throughout the year (Jan, Feb, Mar, Apr, etc) and these workbooks have the data needed to fill the master sheet. How is this possible? Or is it not?
Master sheet.xlsx
-Contains item number
-Purchase Date
-Sell Date
-Purchase Price
-Sell Price
-Profit Price
The 12 workbooks are the 12 months out of the year, which are invoices.
- Contain the data needed in the master sheet such as sell date, sold price, and profit.
The reason I would like to keep the 12 invoices as workbooks instead of worksheets in 1 big file, is due to the high capacity of item numbers each monthly invoice would have. For example (approximately 500 items in each workbook)
I have for hours and weeks, actually months, But I haven't found any sources on the internet, although I have seen the VLook Up how to's on youtube between 2 workbooks, but not the 12 I would like.
I have a table of sales by month per account. Each account has an associated country, but there may be many duplicates of each country per month.
I want to create a formula which indexes the country field and gives me the country with the highest total sum for a specified date range. I'd like to be able to drag the formula down and have the country with the highest sales, then the second highest, and third highest, and so-on. Column ranges are specified below.
K - L - M - N
------------------------------------------------
Month
Year
CtryDsc
Rev
1
2011
[code].....
I was thinking of using an array function utilizing index, large, sumif, and match, but I am getting stuck. I'm honestly not sure if what I'm looking for is even possible, but in Excel, everything is possible, so there has to be a way!
I'm trying to create a pivot in 2010, which gathers a cumulative amount from data sources within two different worksheets.
View 2 Replies View RelatedI M doing SUMIF correct on the below but it seems not to be adding up correctly. Can anyone point me in the direction of where I'm going wrong?
What I am trying to do is sum up the amounts in D if A equals C, as you can see in C their are numbers that appear twice so I don't know if this is a problem. I thought the sum =SUMIF(D:D,L:L,M:M) would sort this but the value I get for 59846(A) is 3665 which is on number 66336(C) so obviously doesn't match as this should be 1211.25........
This year we need to display 2 types of VAT in every invoice. So any listed product in the invoice could have either 5% VAT or 18% VAT depending on its category. At the end of the invoice i need to separately express (show) the total for 5% VAT and total for 18% VAT.
View 3 Replies View RelatedHow to write a macro that will sum daily figures into monthly figures? On the attached spreadsheet I would like to take the daily figures on the amounts on the VRU DAILY worksheet and sum them in the appropriate month on the VRU # sheet.
View 14 Replies View RelatedFor example: I have a spreadsheet with a column that has numbers such as 48600. When I go to format it into currency, etc. I select the decimal to move 2 places. Although it keeps giving me $48,600.00. I dont want that. I want it to put $486.00.
When I try to increase or decrease a decimal, it wont do anything until I have a decimal already in the number. So then I took 48600.00 and tried to increase/decrease the decimal, but it gives me either 48600.00000 or 48600. What I need is to make my number 48600 $486.00
I am extracting amounts from one page to another with eg = 'Oct09'!P9,
if there nothing in that line it returns a $ -
If 'Oct09'P10, has say $10.00, then it returns $10.00.
How do I go about getting rid of the $ - and leaving it blank?
currently have this: = SUMIF(D8:E8: F8:G8:H8,1,D29:E29:F29:G29:H29)
Range is multiple rows
need to get to here:
"multiple" Criteria needs to be able to multiply amount in sum range when greater than 1 and then summed in column I, across each row, then totaled at bottom of column I.
I realize sumif won't suffice.
I have some sales records that contain GBP payments, along with AUR, USD and EUR.
The GBP payments are not a problem, but a formula which could automatically convert AUR, USD and EUR into GBP payments would save a lot of time and reduce any chance of errors.
I have attached an example of the current layout.
Ultimately, I would like to put the sale in it's GBP amount where the boxes are blank & then a formula that detects either
A) If Original currency (the F column) is not GBP, then multiply the amount in the C column by whatever the exchange rate is in the G column.
B) If the exchange rate column G, has anything other than N/A, then multiply this by the amount in column C.
So, if the original currency in column F is in GBP, then I can enter data into the C column, and it will not change, however if the original currency in column F is not GBP, I would like the data in column C to change.
I am looking for a method to count the number of amounts in an addition.
For example, let's assume that A1 contains 354.92+29+84.7+45 That addition contains a total of four different amounts that have been added So, I am looking for a formula that will display the total number of amounts (4) in a different cell.
Another example:
A1 -> 75+9+237
A2 should show -> 3
I have a total $$ amount in one cell. Using this $$ amount I need to populate two other cells. One that is divisble by $10,000 and the remainder would populate the other cell. In the attached excel file I made notes to this effect.
If the $ amount in cell A3 is $83,000 I would need $80,000 to populate cell C3 and the remainder $3,000 to populate D3. If the $ amount in cell A3 was less than $10,000 such as $5,000 then only D3 would be populated.
Column A: List of document numbers
Column B: List of amounts
A B
111 $5.00
222 $10.00
111 $5.00
222 $15.00
I need to merge all equal document numbers so that it shows the full amount on that document number. It needs look like this in the end:
A B
111 $10.00
222 $25.00
I realize a pivot table will do this but the formatting of a pivot table will not work with what I am ultimately trying to do.
I need to add different amounts to a column of prices based on a column of zone numbers. I don't know if that makes sense but here is an example test.xlsx
View 3 Replies View Relatedi'm looking for a formula that will classify amounts according to the aging column automatically each time the month is changed.
my file is attached...
I am creating jet report, however am having to use Excel formula to create totals.
I am trying to sum the amounts in column I depending on the currency, although as it's a jet report it needs to update when the report is run.
My formula: =SUMPRODUCT(SUBTOTAL(9,OFFSET(I4,ROW(I4:I6)-ROW(I4),0)),(F4:F6=Options!B4)+0)
is there a formula that will sum the CCY amounts as highlighted in yellow?
AUD5444579AUD889AUD2144AUD848AUD154USD874902USD14USD14