Format Cell To Show % As The Number Type-in

May 1, 2014

(3) examples when I type a number to a cell:
If I type a number "1", I want that cell to show 1.000% but not 100.000%.
If I type a number ".2", I want that cell to show 0.200% but not 20.000%.
If I type a number "25.5", I want that cell to show 0.255% but not 2550.000%.

I play around with the below custom format cells but they do not work.
_0.01*#.000%
_0.01*#,.000%
0.01*#,.000%

I could use two cells one for number, other cell has a % mark. But I rather to format a single cell if it is possible.

View 4 Replies


ADVERTISEMENT

Type A Number In A Blank Cell With The General Format

Aug 10, 2009

My excel recently the General number format so that when the general number fomat is used and I type a number in a blank cell with the general format, the number is always divided by 10.

E.g., I enter "102", the number is automatically improperly converted to 1.02.
However, if I enter "=102", the number is properly entered as 102.

How can I reset the General format to the original setting without this divide by 100 problem?

View 3 Replies View Related

Show Text & Number With Number Format

Aug 9, 2007

I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula

e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).

View 4 Replies View Related

Determine A Cell's Format And Type

Nov 9, 2008

How do I determine a cell's type (e.g., numeric or string or formula) and if numeric, the format (e.g., currency, general, scientific) including the number of decimal places.

Is there a function that returns the object's properties? Must I use isnumeric, isformula, and so on or is there one function that returns this information?

View 3 Replies View Related

Vba Give Format To A Cell- Specify A Type For It

Jul 27, 2007

Does anyone have any clue of a VBA function that gets a cell and Changes the type of itīs contense?

I have been using the Cstr function as in the next example but I dont get the result I want

hojaRES.Cells(i, 6) = CStr(hojaRES.Cells(i, 6))
If IsNumeric(hojaRES.Cells(i, 6)) Then
MsgBox "nothin changes :("
Exit For
End If
hojaRES.Cells(i, 6) = "0" & "34" & hojaRES.Cells(i, 6)

My problem is that i want to add 034 prefix to a telephone number, and as it treats the data as numeric; number 0 (before34) is deprecated

View 3 Replies View Related

Format Number Of Decimal Places To Show

Mar 24, 2009

Is there a way to format a cell based upon a condition? If the cell value is <1, I want to show two decimal places. If the cell is >1, I want to show zero decimal places. I tried to use the conditional formatting, but there is no option for this.

View 3 Replies View Related

Custom Number Format :: To Contain (and Show) Both An Interger And Text

Nov 29, 2009

I would like to format a row of cells. I want each cell in the row to contain (and show) both an interger and text. The interger will range in value from one to ~10,000. The text will always be two characters long...but these characters will change from cell to cell.

Elsewhere in the spreadsheet I will have a cell (w/ a formula) that counts the values of the intergers in the row, but ignores the text in each cell.

a procedure for format ing the cells in the row?

View 9 Replies View Related

Custom Number Format To Show Difference In Two Dates

May 11, 2006

I'm trying to get an excel custom number format to show the difference in two dates as 0 years and 0 months...for e.g.

Cell a1 = commencement date = 1/1/05

cell a2 = expiration date = 12/31/10

Then cell a3 = Lease Term = 6 years 0 months.

View 2 Replies View Related

To Type A Number In A Cell (G4) On A Worksheet,

Mar 11, 2008

The goal is to type a number in a cell (G4) on a worksheet, and then look it up in different work sheets (JANUARY THROUGH MARCH) in a different workbook,(NEW DAILY SUMMARY.xls) Once found, import the value of the cell next to were the number was found....

View 14 Replies View Related

Merged Cells: Format The Cell So That If There Isn't Two Lines Of Type In The Description It Remains Aligned With The Quantity And Price

Apr 22, 2006

I've attached part of the file I'm working with, and can't figure out how to align the text to the top in the merged cells titled description. How do I format the cell so that if there isn't two lines of type in the description it remains aligned with the quantity and price

View 2 Replies View Related

To Type The Number 413 And Have Joe Smith Appear In The Tech Cell

May 23, 2009

I am in a role that has recently required me to do scheduling for employees every week. The schedule is 6000 rows of sites with columns A-N used for data such as site #, date, address, tech name. I want the tech name to be associated with the site number. Example:

Site Date Tech Name
413 5/17 Joe Smith

413 5/29 Blank

How do I get "Joe Smith" to magically be linked with site 413 and automatically populate in 5/29 when I enter it in initially for 5/17? I want all the techs to do the same sites from start to finish but the data entry is brutul. I am very basic in excel. Ultimately, I want to type the number 413 and have Joe Smith appear in the Tech cell. Is this possible?

View 9 Replies View Related

Excel 2007 :: Type Number In A Cell And Have The Word Appear

May 12, 2010

I need to convert numbers to text in excel 2007. I have done it before in 2003, but can't seem to remember exactly what I used. I may have used some kind of conditional formatting, but not sure.

Here is an example of what I need.

If I type "7203" in a cell I want "Home Repairs" to appear. I have a list of words associated with a list of numbers and want to be able to type the number in a cell and have the word appear.

View 8 Replies View Related

Show Number On Sheet1 From Cell On Sheet2 If Cell Next To Cell Containing Number Filled

Aug 13, 2013

SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...

The VP of our company needs me to create a spreadsheet.

For this s/s I need the following:

Imagine 2 sheets in Excel...

sheet1
sheet2

sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...

Manually, a user has to fill in certain text next to a number.

This for example would look something like this:

_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...

All this would be on sheet2

In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.

In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."

Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A

sheet1 for example would look like this:

_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|

In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.

View 9 Replies View Related

VBA: Format Amts Into Text $ 9.99 Type Format

Feb 13, 2008

Need to create a set of aligned text amts from various cells...Tried Format but unable to get right combination...I've looked at many threads and most seem related to getting amt from text instead of reverse.

Cell may contain nothing or a monetary amt, negative or positive. Output needs to be in format of "$9,999.99-" or similar...with leading zeros suppressed but a min of "$ 0.00" showing, so that above/below amts with be decimal point aligned in a fixed font situation.

I've almost gotten my routine finsihed but this is last remaining obstacle.

View 9 Replies View Related

Format Cell To Show Colon

Jan 12, 2006

Is there any way that I can format a cell to insert a colon three spaces to
the left from the end of any group of numbers that I type in the a cell?
Examples 9:15 10:15

View 12 Replies View Related

Format Cell To Show Only 5 Digits

May 23, 2008

in A1 I have a drop down list with unit numbers and descriptions
example - 123456 - 30 to 150 lots

I want to see if when I pick from the drop down list the right unit and description that the cell will only show the first 5 digits.

example I pick 123456 - 30 to 150 lots in cell A1 would say 123456

View 9 Replies View Related

Show MsgBox If Cell Format Met

Aug 1, 2007

I am trying to pop open a messagebox if a cells interior color index = 3 in a named range.

Private Sub Workbook_Open()
If Sheet1.Range(" Schedules").Interior.ColorIndex = 3 Then
MsgBox "One or more Trainee requires more than TWO HOURS PER WEEK to forefill his log book requirements"
End If
End Sub

View 3 Replies View Related

Formatting Cell To Show Dd/mm/2011 When Format Whole Column?

Feb 8, 2012

I need to enter dates for the previous year, is there any way of formatting the cell to show the dd/mm/2011 when I format a whole column?

View 2 Replies View Related

Cell Number Format Equal To Another Cell Number Format?

Oct 20, 2013

I have data in cell A1 that often changes its number format(from $ to %), can i have the number format change in cell B1 whenever the number format in cell A1 changes?

View 3 Replies View Related

Type Password, Show Letters As Asterix's

Oct 18, 2007

I have a password protected form in access (I know this is excel but the code is the same), and when i click on the button and the inputbox opens for my password, i don't want it to display what i am typing, instead i would prefer asterix's?

View 12 Replies View Related

Conditional Formatting Cells To Show No Format If Cell Contains A Date

May 3, 2014

How can I condition format a cell to show no format if the cell contains a date

Please see the attached book1.xlsx for more info. Book1.xlsx

View 7 Replies View Related

In Other Cell Show After 4th Number

Feb 12, 2014

I have e.g.

1000, Amerika (USA)
2000, Germany (DEU)
3000, Spain (ESP)

How can i put in another cell with formula:
Amerika (USA)
Germany (DEU)
Spain (ESP)

View 6 Replies View Related

If Cell Has Number Then Equal, Else Show Nothing

Sep 20, 2007

If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?

View 9 Replies View Related

Show Only The Number Of A Cell Containing Text And Numbers

Nov 23, 2009

Lets say cells A1 to A5 contain these lines of information:

Till 174 (T0215) - till keeps turning itself off.
Till 245 - stuck on windows screen
116 - keyboard is unresponsive
Berkel Scale is constantly beeping
ped not reading cards Till 156

How can I show only the numbers from these cells (i.e. B1 will be 174, B2 will be 245 etc...)? As you can see the number isn't always in the same place, and doesnt always have the same characters either side.

View 5 Replies View Related

Time Between Date Format Of Type Yyyymmddhhmmss

Mar 2, 2009

I have 2 dates format like 200903021124 and 200903030254. How do I use excel or excel VBA to calculate what is the time that elapses between this 2 date format?

View 3 Replies View Related

Format Individual Cells To Type In CAPS

Jul 29, 2009

how I can format individual cells to put text in caps. I have found how to format the whole worksheet, but I only want certain cells to do it.

View 9 Replies View Related

Format Date: Type Library Is Missing

Nov 23, 2006

I have a problem with the format( Date) function.

On the computer I've developed the application everything works but when running the application on another computer I get a compilation error telling that the project or library doesn't exist

This is quite urgent so I really appreciate a quick solution.

On the computer that fails it says that Type Library is missing when looking at accessible references. Can this be something explaining the problem ?

Private Sub Workbook_OpenTest()
Dim varWeekW As String

varWeekW = Format(Date, "YYWW") ' Here it fails

End Sub

View 7 Replies View Related

Finding Duplicates (cell At The Top Show Row Number Of Duplicate)?

Mar 3, 2008

i have duplicate cell entries occuring. I have a column of about 8000 entries (Column B) and would like to have a cell at the top of my spreadsheet that displays where the first duplicate resides (Row No. will suffice).

At present i have a conditional format on dupllicates, but is is a big task to scroll down through all the data looking for them.

View 9 Replies View Related

Cell To Show Number Based On Sum Of Another Cell

Nov 15, 2013

I want a cell to show a number based on a sum of another cell i.e.

50 shows 1
51 shows 2
101 shows 3

View 5 Replies View Related

Cell Value Matches Value From Sheet1 - Compare Number From Cell2 And Show Difference?

Apr 26, 2014

Sheet1 is Main Sheet which never will be amended and these numbers will be a source for pulling mathematical functions

See attached :
Sheet1.png

Don't be bothered about cell colors etc. They are for my reference

Sheet2

Will contain same Problem Ticket numbers but different (or same) values with number of 'Linked Incidents'
See screenshot
Sheet2.png

Based on Problem ID 10248
Main sheet shows 92 Linked Incidents
Value on Sheet two brings 93

If A5 Sheet2 value can be found in ColumnA Sheet1, look for a number in ColumnC, same ROW and compare it to C7 in Sheet2 ?

Bring up difference value, which in this case would be one.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved