Show Only The Number Of A Cell Containing Text And Numbers
Nov 23, 2009
Lets say cells A1 to A5 contain these lines of information:
Till 174 (T0215) - till keeps turning itself off.
Till 245 - stuck on windows screen
116 - keyboard is unresponsive
Berkel Scale is constantly beeping
ped not reading cards Till 156
How can I show only the numbers from these cells (i.e. B1 will be 174, B2 will be 245 etc...)? As you can see the number isn't always in the same place, and doesnt always have the same characters either side.
View 5 Replies
ADVERTISEMENT
Feb 6, 2009
I have over 2000 cells like the following
S304
S205
S204
S306
S207
and so on
Is there anything I can do to show just the numbers and not the S at the start without me having to delete each S individually?
View 2 Replies
View Related
Oct 21, 2013
How do I truncate a range of numbers where a number will not show more than 2 past the decimal ....and this be in vba as part of a macro.
View 3 Replies
View Related
Jul 22, 2009
I am trying to find the right format that will show a variety of account numbers properly.
I have these types of numbers displaying like this right now:
9.04585E+13 (should be 90458524211818)
785656.001 (showing properly)
NRDE1312089 (showing properly)
SCGA 396.00 (showing properly)
The formatting is set to general, which works for all but the top type of account number. I tried setting to a custom format like "#.#######" ...The only problem with that format is that the "." shows up whether there is a decimal in the number or not. What's the way around that?
View 9 Replies
View Related
Aug 9, 2007
I have a standard block of text with numbers in it pulled from various calculations in a financial model. I have done this through a formula
e.g. ="You gross profit percentage is " & D9 & "% and your gross profit is $" & D10 & "." Problem is i'd like to format the numbers that pull through so they are easier to read. At the moment in the above example D10 results in $-600000000. I'd like it to look like $(600,000,000).
View 4 Replies
View Related
Aug 13, 2013
SAMPLE FILE "error_finder.xlsx (36.5 KB)" attached...
The VP of our company needs me to create a spreadsheet.
For this s/s I need the following:
Imagine 2 sheets in Excel...
sheet1
sheet2
sheet2 has sequential numbers in column1 starting in row2 with the number 1 until wherever..., so cell A2 has number 1, cell A3 has number 2, etc...
Manually, a user has to fill in certain text next to a number.
This for example would look something like this:
_|A| B
-|-|-----------------------------------|
1| | Error-description
-|-|-----------------------------------|
2|1| Whatever the 1st error would be...|
-|-|-----------------------------------|
3|2| Whatever the 2nd error would be...|
-|-|-----------------------------------|
4|3| Whatever the 3rd error would be...|
-|-|-----------------------------------|
5|4|
-|-|-----------------------------------|
6|5|
-|-|-----------------------------------|
and so on...
All this would be on sheet2
In a cell on sheet1 I now need the number from column A displayed, that has the latest entry in column B.
In the example above this would have to be the number 3 in cell A4, because right next to it (in cell B4) is the last entry "Whatever the third error would be..."
Addition: There are several sheets, each sheet stands for one error listed on sheet1 in column A
sheet1 for example would look like this:
_|____A____|_B_|_C_|_D_|
-|---------|---|---|---|
1|_________|833|933|934|
-|---------|---|---|---|
2| error 1 |___|___|___|
-|---------|---|---|---|
3| error 2 |___|___|___|
-|---------|---|---|---|
4| error 3 |___|___| 3 |
-|---------|---|---|---|
In this example, because "whatever error" (cell B2 to B4 on sheet2) was found on press 934 was the 3rd error (cell A4), the number 3 (cell A4) would have to be populated on sheet1 in cell D4.
View 9 Replies
View Related
Nov 29, 2009
I would like to format a row of cells. I want each cell in the row to contain (and show) both an interger and text. The interger will range in value from one to ~10,000. The text will always be two characters long...but these characters will change from cell to cell.
Elsewhere in the spreadsheet I will have a cell (w/ a formula) that counts the values of the intergers in the row, but ignores the text in each cell.
a procedure for format ing the cells in the row?
View 9 Replies
View Related
Nov 16, 2007
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
View 14 Replies
View Related
Nov 16, 2007
I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.
I've look the properties of this to objects and can figure it out.
View 10 Replies
View Related
Dec 5, 2009
I am trying to write a function that will compare the text of cell "A2" to the text of cell "B2" and display cell "A2"'s text characters that didnt match from cell "B2" in column C. Can anyone help me out with writing this formula?
EX: ....
View 9 Replies
View Related
Sep 15, 2007
I have a rather large report full of data, 10+ columns contain a RANKING column, and these ranks, 1-10, are assigned by a % bracket:
1-20% = 1
21-40% = 2
41-60% = 3
61-80% = 4
81-100% = 5
101-120% = 6
121-140% = 7
141-160% = 8
161-180% = 9
181-200% = 10
There are several hundred rows in each column that all need individual ranks. My first thought is to program a if then else statement for 1 to 10 with a % limit range, but this isnt feasable as i would have to program a separate if statement for each of the many hundred rows, or do one heck of a fancy loop that i just cant contemplate (as the rows are split and sepperated... no solid uniform place for the data to be plugged.) What is the best way to go about this? I'm at a total loss of ideas with my knowledge of excel.
View 2 Replies
View Related
Feb 12, 2014
I have e.g.
1000, Amerika (USA)
2000, Germany (DEU)
3000, Spain (ESP)
How can i put in another cell with formula:
Amerika (USA)
Germany (DEU)
Spain (ESP)
View 6 Replies
View Related
Nov 7, 2013
I need excluding text from a cell and come out with a random number up to 3 numbers. Please see the attached image;
If you notice in column D there is text and a number that starts with a decimal, for example on the first row is .437 the next row is .215 next row is .63 etc... Is there a way to come out with a random number mixing it up to 3 digits and output those number on column "E"? Im only interested in filtering and coming out with the random number i mentioned .437 .215 .63 etc... not the +/-.010in.
There is no right or wrong number, i just need to come out with random number using up to 3 numbers up.
Maybe for .437 three numbers up could be .440 for the next row .215 maybe a number up .216..etc..
Hope there is a way to do this, my excel file is too long to type a number manually.
View 1 Replies
View Related
Apr 27, 2007
I have a text field which contains multiple numbers ( reference #s and phone #s). I need to extract the reference # which will be either a 7 or 8 digit number. That number will not fall in any particular place in the string.
View 9 Replies
View Related
Sep 20, 2007
If square A1 says deposit account and c1 has a figure in it, i want g1 to repeat the figure,but if a2,a3 etc says something other than deposit account i want g2,g3 to remain blank.What is the formula for square g1etc?
View 9 Replies
View Related
Dec 29, 2008
I can get only so far, then stumped:3 columns (Hours, Rate, Amount). "Hours" is a 'List' with data from from another sheet. Data is named 'Worked'. 'Worked' is all 2 decimal numeric (represents total time worked), except first item called "Live In"
IF 'Hours' is "Live In", I can use: =IF(A1="Live In", SUM(B1*1))
How can I make it conditional so that if it's not "Live In", then it will SUM(A1*B1)?. SideNote: 'Worked' LIST has total time with minutes expressed as 1/4 of hour (i.e., 1.25 = 1 hour, 15 minutes).
View 5 Replies
View Related
Jun 26, 2013
I have a data set that shows numbers for categories over time. I would like to add the data label to the numeric value and then sort the data by the original number. Is this possible?
Here's an example
A 1 2 3 4
B 5 7 4 1
C 8 0 2 1
D 3 4 9 5
I would like each column sorted independently based on the data in that column, but I want the results to have the label from column 1 concatenated with the value in the other columns such as this:
A1 C0 C2 B1
D3 A2 A3 C1
B5 D4 B4 A4
C8 B7 D9 D5
Each column is sorted by the numeric value, but has the name label from column 1 attached to it.
View 1 Replies
View Related
Sep 29, 2008
Is there anyway of converting the output (which is 7 and in text form) to a useable number format so that I can take advantage of the VLOOKUP function (instead of getting a #N/A)....
View 9 Replies
View Related
Dec 14, 2009
There is probably a really easy answer to this question but I cannot seem to figure it out. I need to calculate the sum of pages faxed on a fax report at my office on an excel spreadsheet which is downloaded from our server. It appears the file is not meant to be used in excel but it downloads as an "*.xls" file anyway. When I open the file I receive this message:
"The file you are trying to open, 'FaxCetailReport.xls', is in a different format then specified by the file extension. Verify that the file is not corrupted and is from a trusted source before opening the file. Do you want to open the file now?"
The file is comnig from a trusted source so I select "Yes" and it opens just fine. There are just over 50 rows of info, one of them being the number of pages. In a blank cell I enter "=SUM(select rows)" and the result is a "0". I have converted the cells to the "number" format, no change. When I right click on the cells and select format, the protection tab on the right has the check box "Locked" checked and unchecking it does nothing, it is checked as soon as you go back in to the protection tab.
The only way around this is to manually retype the numbers in a cell next to the pages column, which is ok for 50 numbers, but I have some sheets where there is over 1,000 entries.
View 9 Replies
View Related
May 1, 2014
(3) examples when I type a number to a cell:
If I type a number "1", I want that cell to show 1.000% but not 100.000%.
If I type a number ".2", I want that cell to show 0.200% but not 20.000%.
If I type a number "25.5", I want that cell to show 0.255% but not 2550.000%.
I play around with the below custom format cells but they do not work.
_0.01*#.000%
_0.01*#,.000%
0.01*#,.000%
I could use two cells one for number, other cell has a % mark. But I rather to format a single cell if it is possible.
View 4 Replies
View Related
Jan 19, 2006
how can you custom a cell format in which you may in type in information that is displayed as ###-##-####-@# I searched everywhere and cannot find this.
For example, a medicare number.
I would need to type in 581566223b6, and it should be displayed as 581-56-2236-B6.
View 9 Replies
View Related
Feb 25, 2014
I have a excel file that tracks completion rates and has lots of formulas but there is one that I cannot figure out.
I want a formula that will display "not completed in time" (for example) if completion isn't 100% by the planned completion date. The problem I have is that I want to have a record of this and if the completion rate becomes 100% after the planned completion date it will no longer show "not completed in time". Is there a way to setup a formula that will show data in a cell if the formula has EVER met certain criteria.
View 2 Replies
View Related
May 8, 2014
I have a cell (A1) that is referenced to another cell in the workbook ('Sheet1!'B1) by an if statement. I then have another cell that I want the value to show up if there is a value in (A1), If there not a value (Shown in A1). i do not want to show the value. Howeverwith the formula I have. I can delete the (A1) reference value (which shows nothing) and replace if with either a (0 or delete the contents of the cell and it works.
A1=IF('Sheet1'!AF15="","",'Sheet1'!AF15)
B1=IF(AND(A$1>0,E108>0),(D108&E108),"")
View 7 Replies
View Related
Mar 25, 2014
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
I added a sheet for visual example.
View 2 Replies
View Related
Oct 12, 2006
I need the " solutions cells " to match to the " source cells " and return a " yes " or " no ". in cells d4:d10. Ex: #1 cell C4=01234598, it will conduct a search & match of cell A5 which contains the number 123, since cell C4 contains all 3 numbers from cell A5, then the formula would result in a " Yes ". The match has to contain all 3 numbers from the solution cells to the source cells.
Ex: #2 cell C7=67891234, it will conduct a search & match of cell A8 =901. Since cell C7 only contains the 9&1 from cell A8, it would return a " No " because cell C7 did not contain all 3 numbers from cell A8. I'm not sure if the IF, Match, Index or Count formula is the right one to use, they all seem to partially work, but still don't complete this problem.
View 4 Replies
View Related
Mar 3, 2008
i have duplicate cell entries occuring. I have a column of about 8000 entries (Column B) and would like to have a cell at the top of my spreadsheet that displays where the first duplicate resides (Row No. will suffice).
At present i have a conditional format on dupllicates, but is is a big task to scroll down through all the data looking for them.
View 9 Replies
View Related
Apr 28, 2008
I need a formula that will show the total number of times "text" is entered into a column and when sorted by year that would only show the total for that year. The COUNTIF formula i'm using only works for the total, not when sorted by year.
View 9 Replies
View Related
Jul 16, 2012
I have text in one cell and I need a text box to show the text from that cell.
For example, if I have text in B2, on a text box I put the forumla =B2. The issue I'm experiencing is that the text box cuts off the text. There's no logic to why it cuts off the text, it's not limited to number of characters and I've played about with the margins and wrap texting, etc, all to no avail.
I've attached a photo of the worksheet to show what I'm experiencing. [URL] ..........
View 5 Replies
View Related
Jul 1, 2008
How can I set a formula to populate a cell if another cell is non-blank? I want a cell to display a number if another cell is not blank.
I'm guessing its an IF formula but I can't get it right.
View 5 Replies
View Related
Nov 15, 2013
I want a cell to show a number based on a sum of another cell i.e.
50 shows 1
51 shows 2
101 shows 3
View 5 Replies
View Related
