Simple If Array Formula
Mar 10, 2013Trying to work out array formula.
basically if B2 = list of figures in range(F1:f22) then "G14" otherwise "".
{=if(b2=(F1:F22),"G14","")}
doesn't work.
Trying to work out array formula.
basically if B2 = list of figures in range(F1:f22) then "G14" otherwise "".
{=if(b2=(F1:F22),"G14","")}
doesn't work.
I'm working on simple array formula between two different sheets.
I'm working on Sheet 1 and sheet 2
Right now I want the result on sheet 2 C9
Sheet 2 C6 has MTR
Sheet 1
c6 MTR
c7 MAR
c8 MTR
E6 2
E7 4
E8 6
Now on Sheet 2 C7 has 10
Now the result Sheet C9 has to get 8
=ARRAYFORMULA(SUM(IF(C6="+Sheet1!$C$6:$C$8",Sheet1!$E$6:$E$8,Sheet2!C7)))
I want this formula to work on both excel and Google Drive but now this formula doesn't work on any one.
I have a row with numbers
1
2
3
5
6
7
8
What is the formula to get then on another column as
1
2
3
5
6
7
8
I am trying to use FIND and an array formula to find the position of text in a range of cells (A2 and A3 in the example) which could be one of a number of options (C1:D1 here). But the array formula throws up the following error: "A value used in the formula is of the wrong data type". The simplest illustration of the problem is as follows. The formula in B2 is
Code:
{=FIND(($C$1:$D$1),A2)}
and $C$1:$D$1 contain REF and ATM respectively. [/CODE]
REF
ATM
203047 05AUG 08.55 OKEHAMPTON ATM
#VALUE!
CO-OP GROUP 380611 REF 191 7553375222 BCC
22
We see that B2 has a #VALUE! error - wrong data type. But for some reason B3 is ok returning 22!
In sheet 1, I have
Col A Col B
John Sedgwy - R
In sheet 2, I have the following names
Col A Col B
Peter Walker
John Sedgwicky
When I did an array match -> ={MATCH(1,(TRIM($a2)=Sheet2!$A$1:$A$2)*(left(b2,5)&"*"=Sheet2!$b$1:$b$2),0)}
gave me an error but when I did an individual match to both John and Sedgw, it works.
i write array like this: Array(1,2,3,4,5,6,7 until 100) how to make it simple, not to write number until 100
View 9 Replies View RelatedIn the two columns listed below I need to figure out what formulas could be used to create the "Last Status" column. To better understand the dynamics of the two columns, pretend that the cell mark in bold is where you are currently residing in the worksheet and you look upward in the first column to see what the last status was and you use a formula to enter this value into the cell just to the right of the bold B. T
Status
Last Status
B
B
[Code]....
Using Excel 2003. I have a very basic SUM formula I am using to show how many forms are still in-house. Pretty simple.
Column D is how many came in.
Column F is how many were completed.
Column E is what is left.
To get the daily count I take the previous day's Column E, add to today's Column D and subtract today's Column F.
=(E2+D3-F3)
Puts the results in E3.
This formula is copied on down the worksheet which results in:
=(E3+D4-F4), with the results in E4. And so on down Column E.
The problem is that if there is no data entered in Column D or F, the results from E are carried (copied?) as far down as the forumla. i.e., if today's column E results in 4, then that is displayed for as far down as I have copied the formula. What I'd like to do is set the formula so that if there is no data in columns E or F, then there is nothing displayed in Column E.
So I have a list of names, and I need to keep track of whose paperwork I have. There's a column that says Yes/No.
I would like to link everything to another sheet in the file. So for every name that says "No," I would like that name to appear in the next sheet. And when someone updates the first page to put in a "yes," I want it automatically taken off the second sheet.
So.
I have Sheet 1:....
I have a reasonable grasp of Excel and this has me completely stumped. Three cells hold numeric values (format General though the format seems not to change the result)
C4 = 4082322.25
D4 = 4046689.05
E4 = 35633.2
Another cell contains the simplest of formulae ...
F4 = "=C4-D4-E4"
Clearly the result should be zero.
In fact the result is (to 15 decimals) ...
0.000000000189175
HOWEVER
If I change F4 formula to "=C4-E4-D4" the result is zero.
I would like to insert a formula in a column, the formula is in column D and must be something like "=C1-B1" for row 1, "=C2-B2" for row 2,...etc. I would like to do it without using a loop cycle in VBA...I have attached an example of the data I'm using..
View 3 Replies View RelatedCode:
fma_rng = .Range("C" & fma_top & ":C" & fma_btm)
rows_blnk = Application.CountBlank(fma_rng)
why I would be getting a 'type mismatch' error with the line in red?
I've got a list of marks (col T), and I want to create a new column subtracting 5 from each value.
Obviously, the formula in this new column is
=T1-5
=T2-5
etc...
But I enter that formula and excel doesn't do any calculating, it just displays "T1-5"
It even seems to recognize that it's a formula, highlighting T1 in the formula and the T1 cell itself, but no resulting value...
I've tried changing the format of the cells (in both columns) to Number and back to General again, but without success.
I've also tried copying and pasting (values only) the whole T column to another column, and tried there, also without any success.
I am using this formula in Cell J12: =AVERAGE($G$12:$G$85)
It will always be $G$12 but $G$85 needs to be done so that it goes until the last empty row on the worksheet.
Using this formula for a bank account,
=IF(SUM(C2-A1+B1)=C1, "match", "NO match")
down a column of about 3000 rows, yields only one cell with an unexpected and probably incorrect response in G2 with a "NO Match" - where the math is correct ?
A B C D
63.58 0.00 -54.97 match
64.57 0.00 8.61 NO match
128.21 0.0073.18 match
201.39
Details:
Attachment is included;
temp2.xlsx
in a bank account file, where "C2" is the previous balance, "C1" is the current balance, "A1" is any check written, "B1" is any deposit applied.
I have used Excel for a number of years and have gotten on ok on my own working out simple formulas myself but I have been stuck on this one for a while. Is it possible to enter a value into a cell and have a predefined formula that works with the data that I enter?? I would like to enter a value between 1-10 and the cell then takes this number and multiplies it by a value in another cell. Eg.
I have a cell that displays £10 (let's say D6)
In another cell I enter 8
I would then like the cell to do the formula =8*D6 automatically, as this value can be different each time (1-10)
I'm getting a mismatch error on my If activecell.value > 5 Then portion of this code. I'm trying to say if the value in column AG is greater than 5 then create an email address from the first and last name. I've even made sure to copy and paste the formula results as values.
Code:
Sub CheckPFPDates()
Dim OutApp As Object
Dim OutMail As Object
Dim cell As Range
Dim emails As String
Dim salution As String
Dim currenttime As Integer
[Code] ........
I have a data example
Cell A1 which contain text I.E = "Words"
I have link B1 To cell A1 I.E = A1
Now what I want is I want the last two words or any alphabet between alphabet
to be bold
W O R D
Example
WORD or WORD
Any alphabet between word to be bold upon my requirement.
Instead of linking that cell to another cell , i want any value when entered into that cell.
That alphabet automatically becomes bold as this will not be requiring linking to that cell
product1
product1
product2
product1
product2
product4
product1
product2
product1
product4
Need the simple formula to list only unique records of above data
unique list is
product1
product2
product3
I have two spreadsheets of data, one column contains an employees name, the other is a value.
Employee Amount
Bob 10
Frank 12
Katie 14
Katie 55
Simon 5.2
I would like to do a lookup that states if name is Katie and value is 55 and is in sheet 1, return "Yes", else return "No"
The name and value conditions will read off the other spreadsheet.
I am trying to implement a simple macro. Here is my
Function Age(DOB)
Age = Int((Now - DOB) / 365)
End Function
Sub Macro1()
Age (Selection)
ActiveCell.Offset(0, 1).Select
******
End Sub
The function basically calculates the persons age using their date of birth. What I need to know is how to copy the result of the function into the cell next to the selected one. (The code above only selects the adjacent cell).
Report I generate once a month that checks to see if tasks are done on or before their due date. Sometimes it works, and others it doesn't...
The basic formula is: [Code] .....
If they closed their task by or before the due date, the condition should be true and it should output "Compliant" beside their task. Otherwise their "Over Due".
The forumla works except when they close their task ON the due date. No matter how I tweak the forumla, it thinks the condition is false as if it cannot tell when the two dates match.
This is my formula with concatenation: =K3/K1*100 & "c" & " Each"
This is the result of the values in K3 divided by K1: 6.41666666666667c Each
I would like to limit the decimal places to two: 6.41c Each.
I have tried to format the cell and none of the formatting options have any effect.
If possible I would like to use the rounding function but I do not know how to combine the formula + text + rounding.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
I just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
I'm trying to have a macro write down an array formula, but when I hit ctrl+shift+enter, the recorder says it can't record. If I write in the macro ...FormulaR1C1 = {=...} then I get the formula as a text. Is there a way to tell the macro that a formula should be entered as an array formula?
View 2 Replies View RelatedI want to use an array formula to sum about 5 rows each of which has 5 columns, e.g.
1 2 3 4 5 15
2 3 4 5 9 23
5 4 3 2 5 19
9 8 7 6 5 35
7 6 4 2 1 20
The final column is the total for each row. Instead of using =sum(a1:a5) then dragging the formula down thus creating a new formula for each line, I want to use a single array formula to achieve the same result. I have tried =sum($a$1:$a$5:$e$1:$e$5), even though all my instincts said it did not look right. And I was right!
I'm sure it is easy, but I just cannot work out the syntax.