I am trying to copy or edit a cell thats has the following formula (see below), I keep getting this message "You cannot change part of an Array!"
=If(ROW($A2:$A8)-ROW(A2)+1>COUNT(W2:W8),"",INDEX($A:$A,SMALL(W2:W8,ROW(INDIRECT("1:"&ROWS(A2:A8))))))
How to change part of an array value?.If i try to change array value "Microsoft Excel" popups a dialog stating "You cannot change part of an array."
Somebody have mention to use "Ctrl+Shift+Enter" but this will change entire array value.So I need a change only a specific cell value.
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
Say I have 3 columns of data: A1:C10 and I want to run a Match() function on them all together to see if I get a match any one those cells, say the value of have in X1.
Since, Match only allows a One-Column lookup array.. is there a way to "concatenate" or "append" the 3 columns together within a formula so now I would be looking to Match in an array that is 1 column * 30 rows?
Basically want to convert =Match(X1,A1:C10,0) to =Match(X1,A1:A30,0) without moving around the raw data in the sheet.
And I want to avoid doing an AND or OR formula that uses 3 separate MATCH() for each column.
I have a hunch that the MMULT or MMULT/TRANSPOSE functions are involved, but can't seem to get it right.
I have the following array formula that works. I am trying to modify it so that on cells where there is no data, the value which appears (#NUM) changes to a "Blank". I am stuck on how to do it.
The array formula is:
=INDEX($C$2:$C$26,SMALL(IF($B$2:$B$26=$B$32,ROW($B$2:$B$26)-ROW($B$2)+1),ROWS($C$32:C32)))
I have been exhausted with a workbook I have been working on for quite some time now, and hope I can get some help here.
I have the following array formula in Sheet1, S2 and copied down to S10051:
Is there anyway to recreate this formula w/o it being an array ?
{=IF(C3="","",IFERROR(INDEX('Master List'!$B$1:$B$2000,MATCH(TRUE,ISNUMBER(SEARCH('Master List'!$A$1:$A$2000,C3)),0)),"ADD TO MASTER"))}
i want to change the table_array reference without changing formula in every worksheet. I tried using a new worksheet and naming it the same as what is referenced in vlookup table_array but it messed up all the data.
I have to use a different worksheet every month so need a way to change reference OR how to change array data without messing up the worksheets with the vlookup
Is there a way to set an array equal to part of another 2D array. If say I have an array with 5 columns. Is there a way to break that up in to two arrays one with 3 and one with 2. Even getting it to 5 1D arrays would work. I bring it in as 1 array but I need the information in different places. This is actually only the output. So if there is a way to send only part of the array out that would work to. I know you set the range smaller than array with range=array, but that still doesn't get me where I need to be. This is obviously without simply going through a loop. I could set it to 5 singles with a single nested loop I know. I was looking for a non-loop way.
View 5 Replies View RelatedI just wanted to concatenate a few cells using an array formula like this:
{=SUM(IF(B2:J2="";0;B2:J2))}
Well, this does not work. I have no idea why it fails. Any solution to this without scripting?
i need to replicate what i did using array formulas with VBA macro (array variable). to make things clear and simple i created an example for illustration only. look at it & u will find what i did & what i need to do ,much of it
in writing so that i accurately describe my problem. attached is my example
I have a multicolumn listbox, and a multidimensional array.
I want to put just SOME values of the array into the listbox, but I ger errors using both .list or .column to access single items, and even using .additem .
I have:
dim variable(2000,2) as string
variable(1,0)="aaa": variable(1,1)="bbb": variable(1,2)="ccc"
variable(2,0)="www": variable(2,1)="awasd": variable(1,2)="asdfa"
....
variable(2000,0)="www": variable(2000,1)="awasd": variable(2000,2)="asdfa"
I don't want to store all 2000 elements, just some ones: how can I do it?
I have a macro that works but was wondering if there is an easier way to shorten up the part of the code that is very repetitive with an array or ? Nothing I have tried works except the code below.
Code:
Sub ClearAndReset()
Dim WS1 As Worksheet
Set WS1 = ActiveWorkbook.Worksheets("Stocks")
WS1.Unprotect
Application.EnableEvents = False
With WS1
[code]....
in C a string is nothing more than an Array of characters ending with a null character.
in VBA this does not seem to be the case.I am trying to use the BlowFish code from David Midkiff for some encryption, however the code sometimes fails:
When encrypting a string a string of a specific length should be returned. however sometimes one of the characters of the encrypted string is a null character, and the returned encrypted string (with a embedded null character) is causing me problems. I want to check for the null character and if present redo the encryption. But how do I check for the presence of this null character in a unicode (double-byte) string?
Checking with Len(encrypted) gives the correct length (!) but trying to move each (unicode)character into an array fails when using the Mid() function past the null character in the string.
Now I can use
byteArray() = StrConv(unicodetext,vbFromUnicode)
to get the lower byte of each character into an array easily, but how do I do this for both bytes of the unicode characters?
Using an integer array does not work other than through
intArray(j) = CInt(AscW(Mid(Outp, j, 1)))
which fails on the nullstring in my encrypted text.
I have tried with variants but so far no luck. I thought if the string was entered into a variant then I could also address the variant as an array of bytes, but that does not seem to be accepted by VBA.
I am trying to populate many arrays with the same code using something like this. For this test, assume the following data in A1.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Code:
Sub populate()
Dim firstArr(5), secondArr(5), thirdArr(5), fourthArr(5), fifthArr(5) As Integer
Dim r, c, num As Integer
[Code]....
The above code does not work of course and falls over. I am unsure whether I should try and concatenate with something like this eg "" & arrName(i) = Cells (r,c) or go down a different route.
I need to export this to Xcelsius which doesn't support any macros/vba. Btw I can;'t use Row() in xcelsius too.
[Code].....
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies View RelatedI'm only starting to get to grips with arrays. I have what I consider to be a lot of data that I need to 'cut' into separate workbooks. I have written some code that does this by simply looping through each line, 250k+, checking against a variable and copying the row into a separate sheet. This took longer than it would have doing it manually. It was suggested to me that I use arrays to speed up the process. I have managed to store the test data into an array but am struggling to find a way to loop through and pull out an entire 'row' from the array based on a variable. I have looked for 2 days in various places to find some way to loop through the data held in the array, but to no avail.
That code will appear here from about 8am GMT tomorrow. I know that once I've cracked this I'm on the road to some very significant time saving and comprehensive report writing.
I want to pass an array to Offset in the "Height" parameter, without having to type the array.
{=MAX(SUBTOTAL(9,(OFFSET(A1,ROW(1:5),,{1,2,3,4,5}))))}
I can't seem to figure out how to build the {1,2,3,4,5}. I've tried another ROW(1:5) and have tried nesting that like N(ROW(1:5)) but nothing works.
How I can get the {1,2,3,4,5} without having to type it out (so that I can expand this to a larger list)??
I am trying to filter an array (the longer one) using the shorter array as the criteria. I am currently doing this using the following method
IF(LOOKUP(lookup cell, array)=lookupcell, lookupcell, "FALSE")
I then copy and paste 'values' and filter out the 'false' to get my final result.
This has worked in the past, but for some reason that I simply can't figure out, the formula isnt working! I've attached the example, and I've highlighted a number in blue (cell E522 and C103), (that should be being found in the 'LOOKUP' function) but is returning a "FALSE". I have looked over the code and simply can't figure out why Excel isn't returning the right value.
This is obviously happening for a quite a few of my numbers, as my filter result is returning an array that is about 1500 shorter than it should be. I have highlighted E522 as the 'example cell' to look at.
I am trying to change the variable value in my following code through array.
What I want is that both the statements
Debug.Print testarray(0) & "........" & testarray(1) & "......." & testarray(2)
Debug.Print custname & "........" & custaccount & "......." & worthcredit & vbCrLf & vbCrLf
should deliver me the same values i.e changedname 123456 and true
for testarray(0),testarray(1),testarray(2) i am getting the values but I am not able to change the variable values for custname ,custaccount and worthcredit, although I am accessing the same elements.
Here is full ....
Through VBA is it possible to give a range of cells that should be converted to array formulas? As part of my macro I am copying a sheet from one book to another. This sheet contains a lot of formulas and so as not to keep the reference of the old book I find and replace "=" with "#" and then swap them back after the move. This works fine for all normal formulas but not the Array formulas.
If someone could tell me how to give and range and convert them all to arrays or can think of a better method of moving a sheet from one book to another without the formulas keeping the references to old book.
wondering is there a VBA equivalent of --() in excel that turns trues and falses to 1's and 0's?
View 14 Replies View Related=CORREL(C1:C10,C12:C21) at H1
=CORREL(C1:C10,C23:C32) at H2
=CORREL(C1:C10,C34:C43) at H3
etc
can i have a macro that first array remain the same, and second array always 11 cells added. drag it down also can
I've tried to multiply each element in a 6x6 array by a similar 6x6 array, both on the same sheet, and it worked.(see Macro2 and attached xls file "Test").Then I got more ambitious and tried to do the multiplication from a standard array in sheet "TestA", with the result on the same sheet, by each array in sheet "TestB" and failed.How do I solve this problem? Pgualb PS:I'm using the R1C1 style.
Sub Macro2()
For y = 29 To 34
For x = 2 To 7
Cells(x, y) = Cells(x, y - 27) * Cells(x, y - 18)
Next x
Next y
End Sub
Sub Teste12()
'Multiplica matriz em TestB por matriz padrão em TestA com _
'resultado na matriz em TestA correspondente ā matriz em TestB
'
Dim x, y As Integer
For y = 2 To 7.............
I have a sheet ("ORDEM"), i need paste values in sheets V1, V2 ...V5, but change array.
Look my file, i make manual result in V1
I am having a ton of trouble with this. I am trying to add a single text row in between existing data. I have tried multiple loops to try to place an array into Column G, but I cannot figure it out. Is there some coding that will produce the sort of result below in column G?
View 6 Replies View RelatedCode:
Sub TabColor()
Dim mySheets As Worksheets
Dim mySheet As Worksheet
Set mySheets = Worksheets(Array("sheet1", "sheet2"))
For Each mySheet In mySheets
With mySheet.Tab
.Color = 9
End With
Next
End sub
I'm getting a type mismatch at line 4. Can I not group the sheets like this? This is just a test program, my real one would have 10 or more tabs in the array.
I have 68 cells per sheet and approximately 70 sheets that i need to change to an array function.
Ive changed the formula used using Find and replace but now I need to convert ALL those cells to array.
Is there something I can use to change them all at once. Or am i going to have to go into each cell and F2 CTRL SHFT ENTER?
I am trying to do a vlookup where the values in the Table_Array have a string appended to them. For example:
I want to look up the string "Example1" and the lookup range is
Example1 - monthly
Example2 - weekly
Example3 - weekly
Example4 - monthly
So essentially I want vlookup to only look at the string before the hyphen. My initial thought was to do something like this: vlookup("Example1", left(A:A, 8), 1, FALSE)