I have created a macro that goes from my main sheet to the data sheet and changes all the pivot tables to match. One thing I hate about it is that it is not very fluid. It jumps from the first page to the second (due to the sheets("data") function. Is there a way to make it change the pivot tables on the second sheet without actually have to have the macro select the second sheet?
View 4 RepliesI'm trying to use the Transition property for the multipage control without much luck. So far I have a userform with a multipage control on it.
Code:
Private Sub UserForm_Initialize()
With MultiPage1
.TabOrientation = fmTabOrientationLeft
.MultiRow = True
.TabFixedHeight = 30
.TabFixedWidth = 80
.Style = fmTabStyleButtons
.Value = 0
.TransitionEffect = 2 ' error here "object doesn't support prop"
End With
or...
Code:
UserForm1.MultiPage1.TransitionEffect = 2 ' same error
I have a workbook that I am continually adding and removing pages from. The pages are used together in groups of 3 and as a result are named 1.1,1.2,1.3; 2.1,2.2,2.3 and so on. I have a macro that works on sheet 1.3 and now need it to repeat on sheets 2.3, 3.3 etc depending on how many sheets I have open and active in the workbook. Is there anyway that I can create a macro that will work on all sheets that have titles ending in 3 and then end if there are no more? Thus it would work if my workbook goes to either 2.3 or to 7.3 and so on.
View 14 Replies View RelatedI have the following code which works fine when all of the sheets are not hidden:
View 3 Replies View RelatedI am trying to clean up a macro a little that used to look like the following:
Sub Refresh()
Sheets("Sheet2").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False
ActiveSheet.QueryTables(2).Refresh BackgroundQuery:=False
Sheets("Sheet3").Select
ActiveSheet.QueryTables(1).Refresh BackgroundQuery:=False
I want to set up an array and have the code run through a loop and have gotten stuck on the following:
Sub Refresh()
Dim i As Integer
Dim SheetName As Variant
It does not seem to want to go from the first sheet to the second. What am I doing wrong/what can I do better?
If I opened a new workbook so i had sheet1 sheet2 sheet3... Starting at sheet1, how could i move on to sheet2 using VBA without actually naming it....
Is there a selectsheet.next or something?
I would like to use the below macro with other sheets in my workbook, how do i change the line "With Activesheet" to incorporate this? Lets say my other sheets are titled as: main, report, sheet3, sheet 4?
Sub Blanks()
Dim lastrow As Long, i As Long
Application.ScreenUpdating = False
Application.Calculation = xlManual
With ActiveSheet
lastrow = .Cells(Rows.Count, 3).End(xlUp).Row
For i = lastrow To 1 Step -1
If .Range("A" & i).Value = "" Then .Rows(i).Delete
Next i
End With
Application.ScreenUpdating = True
Application.Calculation = xlAutomatic
End Sub
I'm after a bit of programming which selects the same cell on the next sheet that I have already selected.
So, If I'm on Sheet1 and I have G5 selected, when I change Sheets to Sheet3 for example, I want it to select G5 on Sheet3.
Use a drop down menu (Combo box for example) to look at all the sheet names (these will be names of people, sheets added all the time) be able to select a name which when selected takes me to that sheet. So the amount of sheets will increase so everything will need to be dynamic.
I dont want to see all the list behind the drop down so that why i was thinking of a combo box.
I have spreadsheet with 13 sheets the first of which is a title page, what I wish to do is hide the other twelve sheets and somehow be able to select them from a drop down box (or similar what ever works with a macro)on the front page, the selected sheets would then appear unhidden.
I am OK with formulas etc but macros are beyond my ability even trying to follow examples & tutorials online has me lost.
The sheets all have specific but different names and none need to be selected more than once (although if possible it would be good). I understand where to put the macro in but as to how it is written ......
Here is my macro
MyFileName = Sheets("Macros").Range("B1").Value
MyFileNameTwo = Sheets("Macros").Range("B2").Value
Sheets("Blank").Select
Sheets.Add After:=Sheets("Blank")
[Code] .........
Issue with array that's bolded The way it is set up is to rename the 3rd sheet to MyFileName and rename the last sheet to MyFileNameTwo. The file names will remain constant. They will always be the 3rd and last sheets, but the number in between will vary. Is there anyway to select the 3rd sheet through the last sheet to delete these? When I use the array it wants sheet names but those are based on multiple variables in other workbooks.
I have x number of sheets in a workbook, and I am looking to copy sheets a, b and c into a new workbook that I will create.
The a, b and c are in no order, or consecutive (although they could be). I want to be able to count the number of sheets in the workbook, and traverse through that to find sheets that I need, and select them to copy over to a new workbook.
I have 30 and above sheets in a work book and like that I am having 5 such
books. The sheets are named as 201, 202, 203 ....etc as per the contents in
that particular sheets. (201, 202 .....are the P.O nos.). all the work
sheets are of having similar format of datas.
Now what I need is if I want to look the details of one single sheet (say
324) I have go all the sheets one by one and it is hard to find out.
If any body give me a solution so that if I type a particular no. (forms
part of the name of the sheet) that sheet should appear for me.
I have some reports that I run that go out to analyst daily and I use this script to merge all the documents together. They are the same everytime. However it includes a series of blank rows because the vba I use to create them I believe causes this. Is there a command to remove the VBA when merging them together. Here is the selection copy piece.
HTML Code:
'Import a sheet from found files
Do While Len(fName) > 0
If fName ThisWorkbook.Name Then
[Code].....
I have a print userform where I let the user print a summary package of sheets. I am trying to allow the user to see a print preview of certain sheets. The first one is always the "Bid Summary" sheet (sheet 2). The rest are a dynamic number of sheets with numeric names starting at 1. Now I need a easy way for me to allow the user to see a print preview of the Bid Summary, and then all the sheets right afterwards. I cant use sheets("1","2",...).select because it wont select a ever changing number of sheets. Really it is a problem of selecting a varied number of sheets in VB.
View 3 Replies View RelatedUsing VBA, I need to Select A1:C14.
The problem is that A1:C14 contains blank cells, and there is also an adjacent column D that I do not want to copy.
So, UsedRegion and CurrentRegion aren't doing it for me. (It selects Column D too.)
Obviously, this is an example...the real data set is an export and varies in size.
I would like to use VBA to search a folder and copy data from tabs within the excel files there. The data will be pasted to a tab of same name in the the main file. All the files are in the same format.
So far I have only managed to list the files in the folder using code I found on your site!
I have a workbook that updates from external source and creates sheets depending on a cell range.
I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets
What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far
I get compile error here ........Sheets(ArrSh(1)).Activate
Also need it to work for all the other rows.
Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate
[Code] ......
I have been running a simulation for about 18 hours now and just received:
Run-time error '1004':
Method 'Add' of object ' Sheets' failed
I have been creating new sheets, importing data, pulling some values from the data then deleting the respective sheet. I am using:
ActiveWorkbook.Sheets.Add after:=Sheets(Sheets.Count)
The sheet is actually being added to the workbook, seemingly before the error. I resume the code, and a new sheet is placed in the workbook and it errors again. The Debugger stops and highlights on the code above.The sheet count number was 10895 at the error, just as an indicator of how many times the simulation has performed successfully. I am hoping this is something I can fix without having to start over...
[URL] ....
I want to sort the Inventory Checklist sheet based on Column D but it gives me nothing but references errors.
i have a workbook that has the following sheets
working sheet
job sheet
receipt of deposit letter
completion sheet
delivery note
delivery note (2)
odd
even
t&t
glass
ggf
i want to hide every sheet except the working sheet.
I have tried this but the macros bring up an error when i run the macro
my macros involve printing certain pages dependng on what button is pressed
i get an error whatever
how do i stop this
I have 25 sheets in the workbook and a combobox on the main page, The combobox references a range of 1-25 that represents the 25 hidden pages. right now i can get the sheets to unhide one at a time based on the selection e.g. combobox option 1 will unhide sheet 1 but the sheet are representing sites in a design so i need to have the option to select multiple sites in the combobox option so for example if i select 5 then sheets 1-5 should unhide. I hope I've explained that clearly.
The other question or option would be to just duplicate sheet 1 based on the combobox selection e.g. selection 5 duplicates sheet 1 5 times.
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
How would i go about selecting a row to the left of any active cell. As far as column B
View 14 Replies View RelatedI'm trying to make a macro that selects the 3 highest values and give these cells a blue backcolor. (The code should skip any blanc cells).
View 10 Replies View Relatedi did write code to search for the data..and if the data has more than one record then a button will be appear to find all data that related to entered data... and user will have option to press on the select button to select the wanted recored and delete it or update it....the problem is that the select button show the selected data in the form but its not selecting the right data in the sheet. So when i click on delete button it delete the first row which has the same data that entered by the user.
for example, user wants to see all data the belong to the user "Tim", the forms will show all data related to the use Tim... but i want to delete the selected row not the first row with the name of Tim!
i learnt the code from this link [url]
here is the codes for find. find all, and select
Private Sub cmbFind_Click()
Dim strFind, FirstAddress As String 'what to find
Dim rSearch As Range 'range to search
Set rSearch = Sheet1.Range("a2", Range("a65536").End(xlUp))
strFind = Me.txt_num.Value 'what to look for
Dim f As Integer
With rSearch
I need to do VBA coding. Got 12 Sheets for 12 month of Sales. Every Sheets are in same Header Format.
For Column R (Status), there's Filter Data "TRUE" and "FALSE". I have to move/copy "TRUE" item into Sheet Aging 2014.
I manage to transfer using only one Sheets using Advanced Filter VBA, failed with other Sheet.
I attached the file : Sales 2014.xlsx
on sheet1 I have a button I need to do the following when clicked:
(1) name the next 30 sheets based on cell values in sheet1
(2) for those 30 sheets, hide some of them based on a y/n input in sheet 1
To clarify: the worksheets do not need to be created, they already exist. They just need to be renamed and hidden based on that y/n criteria. see attachment with just 1 worksheet for clarification. So - The next 30 sheets are to be named by the following ranges (B7:B16), (B21:B30) and (B35:B44). For every product with a "n" in column C of sheet1, the worksheet for that product needs to be hidden.
I have merged 336 individual spreadsheets into one book, now I want to merge the data in all the sheets into 1 individual sheet. All the sheets have the same size and range, I need to copy a constant range(row,column) from all the different sheets into one.
What VBA functions to use???
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.