I have an Excel sheet that I want to distribute
And I do not want the recipients to be able to
Change or sort the data.
I used Tools > Protection >Protect Sheet
(Contents,Objects, Scenarios are checked) >No Passord.
The original sheet cannot be changed or sorted.
But if I Copy and Paste it to a new Excel file
I lose that ability.
How can I fully protect the sheet
So it cannot be changed or sorted if
It is copied and pasted to a new sheet?
This is something someone asked me and told me it's possible without VBA. I don't know if it is. I'm sure if it is possible, someone here would definitely know!
I have workbook, which I can not protect. It's sort of a template, so is used again and again with different data. It's accessible to many users. However, I don't want any changes in that workbook once it is closed.
For example, a user opens the workbook, he makes changes in the data, takes the outputs and uses it somewhere else. Now, when he closes it, it should revert back to the same as it was when it was opened. Even if the user saves it and closes, it should remain the same.
I recieve an error :
Run-time error '50289':
Can't perform operation since the project is protected.
When i try and run my code.
The code does add parts to modules and workbook events, but I need the code to be protected.
I have a list in rows where I have a ranking formula =COUNT($G$5:$G$81)-(RANK(G5,$G$5:$G$81)+ COUNTIF($G$5:G5,G5)-1)+1 When I sort the rank, ascending. All of the unique numbers sort ascending, but the non-unique numbers sort descending
ex) 1.751
2.52
3.753
418
417
416
Using DataEntry sheet for data.
Trying to rearrange the data to DataFormatedProperly sheet.
So far all I can accomplish is DataFormatedWrong sheet.
Edit: Not sure what happened but file was NOT understandable before. It should be correct now.
Is it possible to make excel sort ascending or descending but from mid way through alphabet and then loop through the alphabet again. for example. If Cell A1 had "A" in, it would sort as normal.
Cell A1 = A
Cell A2 = B
Cell A3 = C
Cell A4 = D
Cell A5 = E
If Cell A1 had "C" in, it would sort from "C" through the alphabet and then loop to the start of the alphabet as shown below.
Cell A1 = C
Cell A2 = D
Cell A3 = E
Cell A4 = A
Cell A5 = B
As of right now these are the steps i do to sort...i click custom sort choose My data has headers and then i select from the drop down list the word FRNAME.
is there any way i can setup a macro to do this for me? i tried recording the macro but it just is recording me choosing the column FRNAME is in. This does not work for me since FRNAME end up being in different columns all the time but will always be in row 1.
I would like to ask if it is possible to sort a range of row? What I mean is, if I sort like Row 1, the entire block of row 1 will move as well? Like if i have column A to F, then row 1 of column A to F will move together at the same time.
View 3 Replies View RelatedI am looking for a macro to sort my colums in ascending order the range i need sorted is from A7:F107, it will be sorted with the numbers in the A column ie 1 - 107. sometimes different numbers get added and it has to be sorted in number sequence.
If possible i would also like a macro to protect this range after the sort,
I have a macro that copies the contents of a cell, and pastes it into the the first blank cell of a range. Its important that the entire sheet is protected, but the macro won't allow the paste function because of the protection.
Is there a VBA code to unprotect the sheet, run the copy/paste macro, then protect the sheet again. THe problem is I would prefer the protection to use a password, as I don't want the user to simply unprotect the sheet from the menu bar.
I tried the following code and it doesn't work:
Sub Macro2()
Cells.Select
Selection.Locked = True
Selection.FormulaHidden = False
Range(Range("A" & Rows.Count).End(xlUp).Row & "A300").Select
Selection.Locked = False
Selection.FormulaHidden = False
Range("AE11:AG300").Select
Selection.Locked = False
Selection.FormulaHidden = False
End Sub
I want to be able to unlock all cells after the last cell that has data in column A down to row 300. Also need to unlock cells AE11:AG300. What's wrong with my code?
I have a worksheet where there are a few columns. The columns involved in my problem is Column A and B. So the users open the worksheet and they change the values of column A. Column B has a vlookup formula and if the value of column A is changed than column B automatically changes its value as well (vlookup).
My problem is that the users of this file are not experienced computer peoples so, sometimes (by accident) they change the value of column B (deleting the formula). I tried to set the protection for column B.... but then it will not allow any change (vlookup will not work) to the cells in column B. So my question is that how can I allow the users to see the values in column B but not to edit it..and also let excel to let the formula to change the values of column B (if column A value is changed)?
is there a way that i can stop people being able to edit certain cell in a sheet but still allow them to type in other cells as when i have tried diffrent ways it locks the whole sheet
View 5 Replies View RelatedI have set up a workbook containing 15 sheets. 12 of them are named Jan to Dec. I KNOW how to protect each one, but is it possible to protect all twelve in one go?
View 9 Replies View RelatedI have a worksheet that I want to protect, but when I use the protect worksheet command on the tools menu, it renders all of my VBA useless.
View 11 Replies View RelatedI know how to protect VB code (e.g. Protection tab of VBAProjectProperties), however I would like to know how to embed code to stop the user from accessing the Macro (via Run Macro).
I understand you can do this by adding "Private" to the subroutine, however, is there some code I could add into a macro/connecting to a button, that would enable the user to protect the sheet (without needing to manually type private within the Module subroutine)?
I'm trying to set a check during the WorkBook_BeforeSave event.
View 4 Replies View RelatedI'm trying to protect my project so that others can't unhide a sheet I have tagged as veryhidden within VB.
I followed these steps:
1. Select project in the projects window
2. choose Tools
3. Project Properties
4. Protection tab
5. checked lock porject for viewing
6. entered passwords twice
7. clicked ok and saved
On another file this has worked perfectly as I wanted it to.
However on another very large file with multiple VB projects it is not "taking" on the project I need it to.
I can open the file, the VB project and change the setting on any sheet I need to without entering a password.
I have a scoresheet with 60 contestants. Each contestant takes up 7 rows,
the first six of which are hidden to start with and I have put macros in the
adjoining column so that when they are clicked, the full 7 rows open up and
the table of scores can be entered, When entry is complete for that
contestant, a further macro when clicked will close up the 6 rows, leaving
just the main line (line 14) with the No, Name, “OPEN” macro and other Totals
in adjoining columns.
The sheet works fine, but as many people will use this programme, I need to
protect the sheets against mistaken entries etc., and as soon as I protect
it, the macros wont work and throw up a “unable to set the property of a
hidden range class, run time error 1004. I don’t want to leave the sheet
unprotected, can anyone advise me where I am going wrong.
I am also trying to find a way to validate “time taken” entries so that they
can only be input as minutes and seconds in the format of 09.56, within a
range of 00.01 – 10.00. Not having any success with this as it keeps
converting the data into something like a date.
On my worksheet i am using advanced filters to view the data in the sheet.
But when I protect the sheet they do not work, I have unlocked those particular cells (Row 1). But it still does not allow the use of the advanced filter when the sheet protection is on.
I use the following piece of code to show/hide certain worksheets in a workbook. To access the hidden sheets, a command button runs the code. It works very well, except that the password is openly displayed in the message box (as opposed to returning asterisks for the typed characters).
Sub togglesheets()
Dim Ws As Worksheet
Dim strPassword As String
strPassword = InputBox("Enter Password")
If strPassword "Password" Then MsgBox "Wrong Password": Exit Sub
Application.ScreenUpdating = False
For Each Ws In ActiveWorkbook.Worksheets
If Ws.Name = "Apr-Sep" And Ws.Visible = xlSheetVisible Then
Ws.Visible = xlSheetVeryHidden
ElseIf Ws.Name = "Apr-Sep" And Ws.Visible = xlSheetVeryHidden Then
Ws.Visible = xlSheetVisible
End If..............
Is there a function of formula in Excel that will show me which cells are protected. I have a worksheet that needs certain cells to be protected. I don't know how i can get on good look to see if the are all protected.
Is there a conditional formatting formula possible.
Is there any way I can protect my sheets properly..? I know you can use Tools > Protection.. but I've found (and used, for good, not evil!) macros on the web that will crack these in seconds. Is there any way I can disable the 'Tools' menu so that other users can't load these password crackers?
View 9 Replies View RelatedI have a excel Workbook, 6 sheets and many calculations with formulas and macros.
Is there a way to protect this workbook to be able to insert data only in the correct cells, I tried but the macros does not work, they are essentially copy and paste.
there will be 3 sheets with reports to be printed too.
I have a workbook and i have spent time protecting all the formula cells and allowing user to only be able to select unlocked cells (so they can quickly tab to where they need to input info).
I have lots of codes running and always use Activesheet=unprotect If i am modifying protected cells and then at the end of the code i put back the activesheet=protect.
HOWEVER
When i transfer this book to another machine or to someone else to run it on their machine - ALL of my protection GOES OUT THE WINDOW
Also - is there a way to hide or protect all my code so that users cannot modify it?
If so - how do i get it back to modify state when i want to edit it?
How do you protect a workbook with a pasword in 2007 ???
View 9 Replies View RelatedIt is my understanding that the autofilter should still work on a protected sheet, but despite all of my efforts I have not been able to make this work. I have tried adjusting the settings on the protection to allow filters, formatting, and everything else I could think of all to no avail.
What am I missing here? This is the same on several different spreadsheets that I have put together.
I have at average 10 sheets in one workbook. I have to protect 9 workbooks.
Can I protect one workbook in one go rather than protecting each sheet in every workbook?
I'm running a macro on Workbook Opening that checks to see if the sheet is protected, and if it is, unprotect it. I have used the code (simplified):
If Activesheet.Protect = True Then
Activesheet.Unprotect
End If
Unfortunately this seems to protect the sheet if it isn't already protected. Have I used the wrong first line perhaps?
I need to protect excel file. I have search vba codes and tried to combine :
1. Must enable macro on open
2. Input user id and password
3. Disable cut, copy, paste and print
but not work.
user : test
password : 1
Details as per attachment