Stack Toolbar Buttons
Jan 30, 2007
Is there a way to stack toolbar buttons on two rows instead of one row?
I have a floating toolbar that is created when a workbook is opened. The toolbar has 16 buttons (all in a row) and gets in the way because it is too long.
I would like to display the toolbar with two rows of eight buttons instead of one long row of 16 buttons.
Is there a way to create a floating toolbar that when created will display the first eight buttons and then “wrap text” /”carriage return” itself and then display the final eight buttons?
View 3 Replies
ADVERTISEMENT
Jul 28, 2006
I have created 2 toolbar buttons which were attached to a macro that ran the original 'EditTenancy'. I now want to change these to use anew macro 'EditExistingTenancy' but cannot see how to do it as when I right click now I only get a toolbar list.
Do I have to creat 2 new toolbar buttons?
How do I get rid of the non-functioning ones?
View 4 Replies
View Related
Oct 14, 2008
I have created a toolbar with buttons that run macros. When the macro is assigned to that button the macro will run fine. However, when the file name of the excel workbook has changed (file relocated or name changed) then the macro (button in the toolbar) does not work and has to re-assigned in the toolbar. Is there anyway of getting around the problem of having to reassign the macro to the toolbar button whenever the file name/directory changes.
View 5 Replies
View Related
Oct 19, 2006
which of these toolbars provides the better 'controls' to paste onto worksheets (as opposed to UserForms)? For those wondering, both toolbars contain some apparently similar controls, e.g., combo box, radio button, spinner etc. but there are differences in their behaviour it would seem...
View 2 Replies
View Related
May 6, 2009
I'm running into an overflow stack with a fairly large MACRO program. Will chopping the VBA MACRO into call routines reduce the stack size of the MACRO?
View 9 Replies
View Related
Jul 16, 2008
I'm running a while loop and after about 3000 iterations get this error:
"Out of stack space"
View 11 Replies
View Related
Aug 28, 2009
See attached. I want to use column A to create column B (the expected result) by way of a formula. Index?
View 6 Replies
View Related
Aug 21, 2013
I added some code I got today and now when it runs i get the code 28 out of stack space.
Basically when the If has determined which macro to run, once that macro has ran that should be it.But if deletedates2 has ran, it reverts back to deletedates and starts again, then I get the error:
Sub deleteDates()
Dim sh As Worksheet
Dim lr As Long
Application.ScreenUpdating = False
'# Determin if (O:O) has been deleted#'
If Application.CountA(Range("$O:$O")) = 0 Then
Call DeleteDates2
[code].....
View 6 Replies
View Related
Jul 12, 2006
how to print the call stack?
View 3 Replies
View Related
Jan 5, 2009
I have 65,000 rows of numerical data in column A. In column B are selected values from A. I need to put values from non empty cells in column B to C and "stack" them in a contiguous column with no empty cells. (Please see attached).
View 3 Replies
View Related
Feb 6, 2012
I am trying to run the following code, but when it executes, I get a stack overflow message....
Application.DisplayAlerts = False
Sheets(client_id).Delete
Application.DisplayAlerts = True
View 6 Replies
View Related
Jul 25, 2006
I've got this code to display a certain cell from multiple files, and functionally it works, but I get a out of stack space error after it runs for a while. I'm sure this is because the loop doesn't know when to stop, which I thought would be solved by having " Do Until sBook = "" " instead of Do; however, then the code will not run at all.
Private Sub Worksheet_Calculate()
Dim sBook As String
Dim sFilePath As String
On Error Resume Next
Application.EnableEvents = False
Roe = 3
Do
View 3 Replies
View Related
Apr 3, 2007
I am trying to determine if anyone has seen a problem like the one I am about to describe. I have created a huge Excel Program with multiple modules and and several macros in each module. Each macro performs a function and then hands of to the next macro. The overall program is sometimes required to go back through almost the entire process once or twice depending on the data it is handling. My problem is that at the end of the procedure, when the last macro runs and gets to the final End Sub, instead of shutting down, it starts going back through the other end subs of the previous macros. I have toggled it one move at a time and it goes from the last macro, back through each of the previous macros, following the call stack in reverse order. in some cases, it will go to the end sub, and then go through the last commands that it went through in that particular macro, repeating steps already taken and devestating the data with orders that should not be repeated. It finally will lock upwhen it gets to a place where an order is given for the macro to go someplace that no longer exist due to previous, PROPER macro execution. Has anyone here ever seen any behavior like this out Excel? The only time this does not happen is when the data the program its handling does not require Excel to repeat its travel through the macros a second or third time.
View 9 Replies
View Related
Apr 30, 2013
I have a spreadhseet with lots of sheets. Instead of scrolling across to see ones out of view, it would be really neat if the view of the sheets could be stacked to show them on multiple rows.
Can this be done?
VBA is an option if I need to go down that route.
View 3 Replies
View Related
Oct 17, 2008
Here is my scenario, I have the following data:
Data Series 1
a=3
b=3
c=4
Tot 10
Data Series 2
d=2
e=2
f=2
g=1
h=1
i=1
j=1
Total 10
Data series 3
k=4 (d+e)
l=3 (f+g)
m=2 (h+i)
n=1 (j)
I want the three stack bars together, for the series 2 & 3 I want them without any gap so I can see how data series 3 is created.
I can't find a way to create a three stack bars chart that don't have the same number of data series, I don't want percentages.
View 9 Replies
View Related
Feb 10, 2012
I am trying to create a worksheet that has multiple radio buttons. Each radio button is linked to a Macro. I need there to be many buttons running down one side of the worksheet. Each button needs to perform a macro that is relevant to the cells in the same row that it is on.
Essentially what i am trying to do is make a macro that when the button is pressed copys data from H6 and paste it into B6. The button is situated above I6. I need a button for each row from 6 to 110.
While this macro is easy to create (i use the record button and then assign the macro to the button), i would have to do this 104 times and assign a new macro to each button.
Is there a quicker way?
View 6 Replies
View Related
Mar 14, 2007
Is it possible to change the color of buttons or command buttons? There does not seem to be any place that allows this under properties for buttons, although there does for command bars. However, I've tried recording a macro as I change the color, but nothing get's recorded so I'm not sure what the syntax would be.
I have a spreadsheet with several buttons and I'd like them to change colors as they are pressed so it's possible to see what you've already done. And then, as soon as any other cell on the sheet is changed, the buttons reset color.
View 9 Replies
View Related
Oct 21, 2008
the code i have got is attached below but the problem i am having is when i enter the letter "H" which is calculated in AJ and i enter it fast it comes up with the error "Out Of Stack Space error 28". AJ in the code below is where the cumlative value is stored, and AI is the value that it is measured against it AJ is greater than AI the message is displayed.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rRow As Range
Dim icolor As Integer
Dim ifont As Integer
With Application
.CellDragAndDrop = False
.CutCopyMode = False
End With
If Intersect(Target, Me.Range("TABLE1")) Is Nothing Then Exit Sub
Me.Calculate
For Each rRow In Target.Rows
If Me.Cells(rRow.Row, "AJ") > Me.Cells(rRow.Row, "AI") Then
rRow.ClearContents
MsgBox "No Holidays Left or No Holidays setup Against Them " & Me.Cells(rRow.Row, "AI") & " days."............................
View 9 Replies
View Related
Mar 9, 2012
I have columns A through AKP (A:AKP) with data, and there is a varied number of rows for each column. If possible, I need a macro that will "stack" columns in pairs of two. For example, column "C" directly under column "A" and column "D" directly under column "B" and so on for all columns A:AKP.
This is an example of what my data looks like:
COLUMN A COLUMN B COLUMN C COLUMN D
ROW 1 2598 F800 2599 F800
ROW 2 2598 K1300 2599 K1300
[Code].....
View 3 Replies
View Related
Apr 1, 2008
i was hoping to get advice from anyone familiar with the "out of stack space" error. basically i'm building a UserForm-based app which reads spreadsheet data and stores it as a module-level variables (well, an array). the different buttons lets you edit the variable, and once you're done it writes back to the spreadsheet.
at least, that's the idea - lately i've been running into a lot of "out of stack space" errors, which have been pretty hard to pick out because my app's grown to the size where it's not so easy to pick out the root of the problem. what happens is the app will let you perform operations on the data with no error, but after repeating the operations too many times the application tells me i'm out of stack space. i've read up a bit on the error, and here's the list of possible causes i'm using as reference: Out of stack space (Error 28)............
View 3 Replies
View Related
May 22, 2007
I've recently got a new computer and this problem is driving me nuts.
When I click view!toolbars!drawing, nothing happens. No drawing toolbar appears at the bottom of the screen where it used to be. There's a small "drawing toolbar" icon on the main toolbar, but whether this is depressed or not makes no difference either.
I understand this may be changed in the 2007 version, but I’m using Excel 2000
View 10 Replies
View Related
Oct 12, 2009
There is something that is bothering me in excel. Every time I open a workbook, on my toolbar appears the "Reviewing" one. I tried to unchecked it from the customize toolbar option but still appears on opening a new workbook ((.
View 2 Replies
View Related
Nov 25, 2006
I downloaded the calculator toolbar, and for some reason it doesn't look right, it doesn't resemble a calculator layout at all.
The numbers are skewed, as though the layout is in landscape view instead of portrate. I've tried repeately to delete it from the toolbars menu option, with no success. It's become annoying.
View 9 Replies
View Related
Apr 20, 2007
I have a project management workbook I created that tracks the status of projects and their associated "grocery list" of items being pursued to complete each project. The user needs to indicate the status of each grocery item by setting the item red, yellow, green, or blue; each color has an associated number (1, 2, 3, 4) so the overall project status can be averaged. I am currently using a command button and Select Case statements to allow the user to toggle through the various status colors with a single button. The problem is, I still have to have a separate command button on each sheet which takes up a lot of space.
I would like to have a single toolbar that is available on all sheets, much like an Add In creating a menu, but it is impossible for me to personally install a custome toolbar or an Add In on each user's PC. I need something imbedded in the actual workbook that will propogate the toolbar on its own.
View 9 Replies
View Related
Feb 14, 2007
how i can create a replacement toolbar within excel, that will run once the file is opened. replacing the file, edit, etc.
View 3 Replies
View Related
Oct 5, 2012
I have a macro and I want a button on the toolbar, once clicked on the button, I want the macro to run.
Is there any way to do this. If this can be done using add-ins, I doesn't know how to create a button for the same.
View 4 Replies
View Related
Oct 2, 2008
I use Excel 2000.
I want to hide all toolbars when I work.
I know how to hide them during a session, but when I exit and reboot Excel, the "standard" toolbar always returns.
Is there some way to hide the "standard" toolbar permanently?
View 8 Replies
View Related
Aug 20, 2008
I am running Excel 2003 and in my workbook I created a macro and assigned it to a toolbar comman button, "Copy Filtered Data". This macro copies the visible data into a new workbook.
This works well but others in my company will also be accessing this workbook from a sharepoint and I discovered that when they open it this command button is not on their toolbar.
Would anyone know what I need to do to have this button load on the toolbar when the workbook opens?
Also, I would like this button to either unload or greyout when the workbook that this button is intended for is closed.
View 9 Replies
View Related
Feb 17, 2009
I have created a toolbar button to save a file as a specific name based on a cell value. The macro runs fine, but the button changes priority when the new file is saved.
i.e. the original file is called "quoting_tool" and the newly created file is called "quoting_tool_'B3'". However, the next time I click this button in the original file, it requests the new file as the home of the toolbar button. I have tried saving the original file after adding the button, but that doesn't work.
View 2 Replies
View Related
Mar 25, 2009
Is there a way to name a combo box from the form's toolbar? I know you can give a name a combo box from the activex control toolbar but I am puzzled with the attached spreadsheet. The code is referencing a name "Combo Box 2" and I am wondering how they assigned a name to a combo box from the forms toolbar. See attached file for more detail.
View 3 Replies
View Related
