Is it possible to have stacked text in a cell? Turning wrap text on doesn't quite work since an "ol" is the same width as an "m".
Example: P
R
O
D
U
C
T
I am trying to create a 100% stacked column which has a superimposed line chart over the top of it.
Basically % of yes and no for two separate datasets, but which share the same characteristics. The x-axis is months of the year.
CSP Yes
CSPNo
All Yes
All No
Apr-13
6
19
[code]....
I can create 2 separate charts. One for the yes/no of one set as a 100% stacked column. I then use 'no fill' on the No column to stop this from being seen.
I can create a 100% line chart for the second data type, and 'no fill' the 100% line that appears.
However, I can't merge the two charts to show the Yes % for one dataset as bars and the Yes % of the other as a line.
I am using Excel 2010 on XP.
Had a quick browse through the forums for an answer but as it is quite hard to describe i cant quite find the answer.
Basically I need to split some cells but they have stacked text in them i.e
Cell a1 shows:
666666
part 77777 x 20
5x s452563
Cell b1 shows:
1x 254684564
3x 4481211111 & 5 ea g8373
etc.
When i run the text to columns function i only get the first line of the data, i could ideally like to split the data by spaces and/ or line breaks.
What's the msoTextOrientation for "stacked" orientation. I want to arrange the text so that the letters are normal, but the word reads up/down....
L
I
K
E
T
H
I
S
msoTextOrientationVertical rotates the letters 90 degrees as well, which isn't what I'm looking for.
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart. I managed to present the first 2 stacked bars. (light & dark green). Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis. (This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange) I played a little with the Width and Overlap – and got the result shown in Sheet1. (When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels: Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart.
I managed to present the first 2 stacked bars. (light & dark green).
Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis.
(This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange)
I played a little with the Width and Overlap – and got the result shown in Sheet1.
(When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels:
Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
I wish to plot a Stacked column graph of dates work is completed. Several peoples names along the bottom and dates up the side. The stack shall be broken into 6 steps, each step denoted by the date it was completed.
I would also like a marker at the top of each stack indicating the deadline date.
I'm working from a large table of dates.
Code:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlAreaStacked
I created a simple stacked area type in vba. Is it possible and how to have this stacked area to get values from combobox and textbox?
I have a stacked column graph showing data for 5 categories for 4 years (4 columns, 5 categories each).
I would like to display a Total above each column. I was able to do this on a single chart by just adding a text box and manually adding the total amounts. However, I would like this to be updated dynamically, as the data will be changed frequently.
Is it possible to:
(a) Have the total display as a data lable, or
(b) Have a text box containing a cell reference
I'd like to create a stacked column chart that compares monthly results from the sales staff but can't get excel to show what I need.
Each salesman has a total monthly sales figure which includes an element of profit and I'd like to see the splits in a stacked column chart. E.g in May, Simon's total was £7295 of which £863 was profit.
MayMayJuneJune
TotalGPTotalGP
Simon7295863121231912
Mike32397480995670199644
Gordon39567472631393362539
The chart should have a column for each salesman and show both the total figure and the profit for each month in the same column so with May and June figures there should be 6 columns on the chart.
How do I lay the data out in excel to get the right graph?
I am trying to develop a dynamic stacked bar chart, I have a consistent number of columns defining the x axis and a variable number of rows defining the y axis (the stacked data). Is it possible to generate a dynamic stacked chart. I have tried using dynamic named ranges but I can't get it to work for a stacked chart.
View 7 Replies View Relatedhow to create a stacked bar & line graph together.
I know by default, I can choose to have a stacked bar, OR a line graph, OR a basic bar & line graph.
But I need to take a step further and have a stacked bar WITH a line graph.
options in which I could combine the above graphs?
i have a chart made but it will only read numbers what i looking for it to do is read cells filled. beacuse none of the cells will have numbers in them. example column I,J,K,L will have a letters in them. starting on row 2 on down till the end. what i'm looking for is if I2 has a letter in it it will read as one for the chart. and will ignore the other columns if K7 has a letter it will read as one and ignore the rest of the columns. this will go on till the end of the sheet. and all rows with nothing in them will be ignored. is this posable?
i think it is bacisly giving a value to a letter and having the chart inturpat that value as 1 and then adding them up. if posable i just thought of maybe the letter could be turned into a date to give an ongoing graph for the info. maybe thats the wisest thing to do to show what each day looks like. hmm i have to play around with it. just typing this out i think i figured a way to do it.
I have a spreadsheet where I have some data. The data is divided into two parts we have part A that is a figure and then I have a A total which is a figure which part A cannot exceed and then what I would like to do is to create a Stacked Column Chart where I have an A total column where the maximum amount is the total A and where I would like to show how much A has utilized the A total.
View 5 Replies View RelatedI would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in brackets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
i have a stacked bar chart, similar to this: [URL] What i need is a trend line, similar to this: [URL] that shows the average of the bottom bar to date.
View 14 Replies View RelatedWe are trying to create a stacked bar graph with an average line. Each time we try to add in the average data to the graph it adds it to the stacked bar. The stacked bar should represent the inpatient & outpatient cases at a hospital for the current year (months showing across the as columns). The line should represent the previous 2-yr average total. Anyone have an idea how to add a line to the stacked bar graph? It has us stumped.
View 3 Replies View RelatedThis is the data:
jan09 feb09 mar09 .....
Division 1
Division 2
Division 3
Division 4
Division 5
jan08 feb08 mar08 .....
Division 1
Division 2
Division 3
Division 4
Division 5
The graph would be a bar graph with 2 bars next to each other per month. each bar would be stacked by division. The goal is to compare for example sales in 08 with sales in 09 showing 2 bars next to each other split by division.
Using the table, draw a stacked chart that has both the project name (A, B etc) and Month on the x-axis (below all the projects). the stacked chart should contain the count for cat1, cat2, cat3 and cat 4 for each project (in different but consistent numbers for each month).
I need this for a presentation today,
OctoberNovemberDecemberProject Cat. 1 Cat. 2Cat. 3Cat. 4Cat. 1 Cat. 2Cat. 3Cat. 4Cat. 1 Cat. 2Cat. 3Cat. 4A
00236111110001B
C
D
E
F
0012230182600425G
H
I
02114001602210J
K
L
So on a primary 'y' axis against I have plotted some stacked clusters (3 categories, each with 2 columns and 2 stacks) and now I want to add a percentage line on a secondary 'y' axis to show the % rates for each category.
How do I plot them? I don't want to use Jon Peltiers utility, as I already have it, but still don't know how to use it to achieve the view.
I already have a few macros I run in order to sort data. I am able to show problem data by using a macro to perform an output that puts the number "1" in a cell if there is a problem.
I'm looking for some help if someone could create/show me a macro that can delete stacked numbers. For this I mean if there is the number "1" in cell A1 and a "1" in cell A2, I want to delete the bottom of the two which means remove the "1" in cell A2 so that there are no 1's that are stacked. The number "1" in cell A1 and a number "1" in cell A3 is fine.
I need to create a chart showing a timeline from 0 hours to 100 hours. In this timeline, there has to be 8 seperate segments - ie, phase 1, phase 2, phase 3, phase 4, phase 5, phase 6, phase 7, phase 8. Each phase takes a certain amount of hours (the number of hours of each phase is irrelevant for now!).
how to format this data and then how to display such a chart? I need the timeline along the X axis.
According to my provided data, draw a stacked chart with double columns, each bar includes four types of data(Internet, PBS,Branches and Mail-in/Fax-in) and the x-axis are 1Q06, 2Q06 and 3Q06 repectively. It is urgent,pls provide the template for me. Many Many to all of you.
View 6 Replies View RelatedI would like to make a graph in Excel, where I present both a stacked column and a line with two different axes. Including a clustered column and a line in the same graph with two different axes is easy, as this combination can be found in the custom types selection in the chart wizard. However, there is no such alternative as a stacked column and a line with two different axes. Is combining the two manually possible?
View 2 Replies View RelatedI would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in breckets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
I need to plot a stacked chart. I have attached a sample of it. I need to plot, category As X and subcategory and and its percentage as Y (stacked chart). In the attached sample I plotted a chart. The problem is, the series name showing is not correct. It takes the series name from the top row.
View 5 Replies View RelatedI want to compare the sales from Jan'12 - Oct'12 VS Jan'13 - Oct'13 by showing them in stacked Columns. So will have 2 stacked columns one for year 2012 and beside it for year 2013 and each one will show the months.
View 3 Replies View RelatedI have created a Power Pivot Chart with Stacked Column chart. Made one axis as Secondary Axis and the axis is Clustered Column, but it is overlapped with Stacked bars.
Is there any easy way to solve this issue, apart from creating 2 dummy columns and making it work.
I am plotting a line chart wherein the X-axis is based on % and Y-axis is based on $. I have 5 scenarios wherein they have different ranges. I want to have the X-axis plotted up to 100%. How to get the X-axis stacked at 100%. See attached file.
View 1 Replies View RelatedI'm trying to find a way to alternate between two colors (white, grey, for example) in a stacked columns plot. Each stacked column should begin with a grey layer then white, then grey and so on. These plots will be created and changed frequently so I cannot manually do this every time.
View 1 Replies View Related