I wish to plot a Stacked column graph of dates work is completed. Several peoples names along the bottom and dates up the side. The stack shall be broken into 6 steps, each step denoted by the date it was completed.
I would also like a marker at the top of each stack indicating the deadline date.
I'm working from a large table of dates.
how to create a stacked bar & line graph together.
I know by default, I can choose to have a stacked bar, OR a line graph, OR a basic bar & line graph.
But I need to take a step further and have a stacked bar WITH a line graph.
options in which I could combine the above graphs?
We are trying to create a stacked bar graph with an average line. Each time we try to add in the average data to the graph it adds it to the stacked bar. The stacked bar should represent the inpatient & outpatient cases at a hospital for the current year (months showing across the as columns). The line should represent the previous 2-yr average total. Anyone have an idea how to add a line to the stacked bar graph? It has us stumped.
View 3 Replies View RelatedSo on a primary 'y' axis against I have plotted some stacked clusters (3 categories, each with 2 columns and 2 stacks) and now I want to add a percentage line on a secondary 'y' axis to show the % rates for each category.
How do I plot them? I don't want to use Jon Peltiers utility, as I already have it, but still don't know how to use it to achieve the view.
I would like to make a graph in Excel, where I present both a stacked column and a line with two different axes. Including a clustered column and a line in the same graph with two different axes is easy, as this combination can be found in the custom types selection in the chart wizard. However, there is no such alternative as a stacked column and a line with two different axes. Is combining the two manually possible?
View 2 Replies View RelatedI need to plot a stacked chart. I have attached a sample of it. I need to plot, category As X and subcategory and and its percentage as Y (stacked chart). In the attached sample I plotted a chart. The problem is, the series name showing is not correct. It takes the series name from the top row.
View 5 Replies View RelatedI am working with the Ganntt chart and horizontal bar charts but can't seem to figure out a way to force the X-Axis to behave properly.
In Excel 2007, I am trying to get the X-Axis to show major units of Months. However, in my chart options I can only change the Y-Axis to be Date/Monthly.
Changing my data layout (from the below) to be a vertical format produces the same problem, just in the other direction.
My data looks as follows:
System
Blocker
Production
Migrataion
Retired
Sys1
1/1/2012
780
Sys2
1/1/2012
400
60
90
Sys3
2/1/2013
30
5
1
The Blocker column is formatted as "No Fill" in order to cover a portion of the time-scale.
My X-Axis displays as random dates throughout the period and all of my data displays properly in terms of the scale on the grid.
What is NOT working is that the dates shown on the X-Axis really need to be based on a Monthly scale instead of the randomly selected dates Excel is using.
20120823.xlsx
I can't seem to find the right combination of options to make that happen or force a scale on the X-Axis.
I am trying to create a 100% stacked column which has a superimposed line chart over the top of it.
Basically % of yes and no for two separate datasets, but which share the same characteristics. The x-axis is months of the year.
CSP Yes
CSPNo
All Yes
All No
Apr-13
6
19
[code]....
I can create 2 separate charts. One for the yes/no of one set as a 100% stacked column. I then use 'no fill' on the No column to stop this from being seen.
I can create a 100% line chart for the second data type, and 'no fill' the 100% line that appears.
However, I can't merge the two charts to show the Yes % for one dataset as bars and the Yes % of the other as a line.
I am using Excel 2010 on XP.
I want to numerically graph in a 2D stacked column graph the following:
Training Completed on "Time"
Training Completed but "Not on Time"
Training Not Completed
The training Due date was 10/30/2013.
Book1.xlsx
I need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
Davyccexamp1.xls
We have a bunch of 8 digit Purchase Orders (POs) with end dates. We want to show all ten different PO's on a Line graph on the left with the end date at the bottom. Our issue seems to be that:
1. The graph doesn't show the exact PO #, but does a range. We need each PO number listed. How do we get the graph so show each individual PO on the left?
I have a spreadsheet that I'm trying to make a graph that shows the amount of letters mailed in a certain month.
The first line has 01/24/2008 as date received and 01/28/08 as date mailed. I'm trying to make a graph that shows the amount of letters received and mailed in each month. I know there are probably numerous ways to do this but I'm looking for the most effiecent and I would like to be able to update the same spreadsheet and have the graph update as I add information.
It appears that the bar graph automatically turns all dates into the first day of the year in question.
For example, what I have in the source chart is the following 3 dates: 6/11/14, 6/11/13, 6/11/12, however when I convert the table into a bar graph, it changes the dates to 1/1/14, 1/1/13, and 1/1/12.
Here's a snip of the table: Data source.JPG
And here's a snip of the chart: Chart.JPG
I've tried going into the advanced settings and making the intervals fixed (starting at 6/11/12 with 1 year intervals), however it does not seem to change the display.
I have a dashboard which has dropdown boxes to pick out the data you want to see. From this data i then have graphs which are graphing 0s from the data making the graph look horrible.
I know I need to add NA() to the cells so that 0s dont graph, but all my data has formulas in and i don't know how to add the NA part to the existing formula.
my formula for each cell is
=IFERROR(VLOOKUP($A9,'DB data'!$A$1:$HH$2003,COLUMN(FP1),FALSE),"-")
This looks up name such as "sign on time", then goes to another sheet and retrieves the data.
Where can i add the NA part. I've tried instead of the "-" at the end but doesn't work. and ive tried instead of FALSE and this stops the formula from working.
I want to make a single graph from two data sets that have individual dates.
help!.xlsx
E.g.
Data set 1
1. January 2010 2. january 2010 ... 10. december 2010 etc
10 15 ... 10 etc
Data set 2
1. January 2010 ... 1. January 2015 etc
200 ... 200 etc
What I have done is entered code to auto generate the date in column O whenever data is entered or altered in column A. Here is that code:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("A:A")) Is Nothing Then _
Target.Offset(0, 14).Value = Now
End If
End Sub
What I am trying to do now, is create a column that will take the information from O and do a sort of COUNTIF function that will count how many items of data were entered on a certain date by the day. For a clearer example, I want it to tell me how many items were entered/altered on 7/23. But I also want it to continuously calculate it for each date after that. Preferably automatically, but if a macro is needed I can create an update button.
Once it can achieve that I would like to create a dynamic graph that will automatically (or via macro button) update to show the last 5 days. It should display the date and how many items were entered that day.
I am using Office 2007.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedHow can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart. I managed to present the first 2 stacked bars. (light & dark green). Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis. (This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange) I played a little with the Width and Overlap – and got the result shown in Sheet1. (When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels: Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
I am trying to define a chart of TWO Stacked Bars. (it will be a little difficult for me, with my bad English, to explain – but I'm sure you will understand. My target is a chart as shown in the embedded picture. Take a look at sheet1:
This is a 75% completed chart.
I managed to present the first 2 stacked bars. (light & dark green).
Then I added a blank column ("D") and declared it as a "bar" on the 2nd. Y Axis.
(This "D" series has now two values, of 5, which must be "Zeroed" when the chart is finished).
I managed to add the first part of the 2nd. Stacked bars. (Orange)
I played a little with the Width and Overlap – and got the result shown in Sheet1.
(When The "two fives" will change into 0 - the two orange bars will start from the X-Axis (Zero "Y" level)/ So far so good.
What I need now is to add the last Series (F2:F9) to be put ON TOP of the Orange Bar – but without success. If you'll take a look at Sheet2 you will see what I came up with. I DO NOT want them to be inside each other. I want them as in the embedded picture (side by side). In addition – I would love to present the Labels:
Newspaper, Internet, Relevant, Non-Relv. Inside the chart (if possible)
Code:
ActiveSheet.Shapes.AddChart.Select
ActiveChart.ChartType = xlAreaStacked
I created a simple stacked area type in vba. Is it possible and how to have this stacked area to get values from combobox and textbox?
I have a stacked column graph showing data for 5 categories for 4 years (4 columns, 5 categories each).
I would like to display a Total above each column. I was able to do this on a single chart by just adding a text box and manually adding the total amounts. However, I would like this to be updated dynamically, as the data will be changed frequently.
Is it possible to:
(a) Have the total display as a data lable, or
(b) Have a text box containing a cell reference
I'd like to create a stacked column chart that compares monthly results from the sales staff but can't get excel to show what I need.
Each salesman has a total monthly sales figure which includes an element of profit and I'd like to see the splits in a stacked column chart. E.g in May, Simon's total was £7295 of which £863 was profit.
MayMayJuneJune
TotalGPTotalGP
Simon7295863121231912
Mike32397480995670199644
Gordon39567472631393362539
The chart should have a column for each salesman and show both the total figure and the profit for each month in the same column so with May and June figures there should be 6 columns on the chart.
How do I lay the data out in excel to get the right graph?
I am trying to develop a dynamic stacked bar chart, I have a consistent number of columns defining the x axis and a variable number of rows defining the y axis (the stacked data). Is it possible to generate a dynamic stacked chart. I have tried using dynamic named ranges but I can't get it to work for a stacked chart.
View 7 Replies View Relatedi have a chart made but it will only read numbers what i looking for it to do is read cells filled. beacuse none of the cells will have numbers in them. example column I,J,K,L will have a letters in them. starting on row 2 on down till the end. what i'm looking for is if I2 has a letter in it it will read as one for the chart. and will ignore the other columns if K7 has a letter it will read as one and ignore the rest of the columns. this will go on till the end of the sheet. and all rows with nothing in them will be ignored. is this posable?
i think it is bacisly giving a value to a letter and having the chart inturpat that value as 1 and then adding them up. if posable i just thought of maybe the letter could be turned into a date to give an ongoing graph for the info. maybe thats the wisest thing to do to show what each day looks like. hmm i have to play around with it. just typing this out i think i figured a way to do it.
Is it possible to have stacked text in a cell? Turning wrap text on doesn't quite work since an "ol" is the same width as an "m".
Example: P
R
O
D
U
C
T
I have a spreadsheet where I have some data. The data is divided into two parts we have part A that is a figure and then I have a A total which is a figure which part A cannot exceed and then what I would like to do is to create a Stacked Column Chart where I have an A total column where the maximum amount is the total A and where I would like to show how much A has utilized the A total.
View 5 Replies View RelatedI would like to display 50 sequences, S_1 ..S_50, with stacked bars. Every sequence can contain 5 different events, E_1 .. E_5, in a random order. Every event has a certain duration, t. Lets say the first two sequences are as follows (duration time is in brackets)
S_1:
E_3(200), E_1(150), E_2(300), E_4(500), E_5(300)
S_2:
E_1(200), E_4(150), E_1(300), E_5(500), E_2(300), E_2(300)
...
How do I get Excel to display all Sequences in one graph as a function of time, with the bar-stack-color displaying the kind of event. So if E_3 would be red and E_1 blue we would see
S_1:
red, blue ...
S_2:
blue, ...
i have a stacked bar chart, similar to this: [URL] What i need is a trend line, similar to this: [URL] that shows the average of the bottom bar to date.
View 14 Replies View RelatedThis is the data:
jan09 feb09 mar09 .....
Division 1
Division 2
Division 3
Division 4
Division 5
jan08 feb08 mar08 .....
Division 1
Division 2
Division 3
Division 4
Division 5
The graph would be a bar graph with 2 bars next to each other per month. each bar would be stacked by division. The goal is to compare for example sales in 08 with sales in 09 showing 2 bars next to each other split by division.
